SubOperator Posted January 16, 2023 Share Posted January 16, 2023 2 hours ago, KZJonny said: Oh for sure. I just took a look at the $120 USD cost + shipping and thought it was a little ridiculous for some folded metal and a grommet. Also, my garage project means I am broke. Like, not buying groceries kind of broke while I eat eveything I put away in my freezer this summer. I told myself I'd make some out of stainless as soon as I had the chance..... and there is still a drilled out hockey puck holding my radiator off the support bar. (The bar is nearly as bad for rust and also has to come out.) In all seriousness, it isn't bad little mount, but it looks ghetto AF. It just sounded like maybe you were prettying up the bay, and wanted new ones for semi-cosmetic reasons, so maybe the old ones could be salvaged. I'm in no hurry at all and may get lucky and find a set in the pick n save yard on a car that comes in that aren't completely crap before the Spring as well. EDIT: New part doesn't come with a new grommet for that price!! From my experience the listed price is MSRP and typically the actual price at the counter is somewhat less. But yeah I agree that it does look a bit steep for a simple stamped piece of steel. I will keep in mind you are looking for replacement when I get time to replace them. 2005 LGT Wagon Limited 6 MT RBP Stage 2 - 249K 2007 B9 Tribeca Limited DGM - 272K SOLD - 2005 OB Limited 5 MT Silver - 245K SOLD - 2010 OB 6 MT Silver - 205K Link to comment Share on other sites More sharing options...
KZJonny Posted January 16, 2023 Share Posted January 16, 2023 19 minutes ago, SubOperator said: From my experience the listed price is MSRP and typically the actual price at the counter is somewhat less. But yeah I agree that it does look a bit steep for a simple stamped piece of steel. I will keep in mind you are looking for replacement when I get time to replace them. All good! Just figured If they were going to end up in the bin, or scrap metal pile, I’d throw someone a few dolllars +shipping for a set that are ugly but useable. (I’ll try to grab a photo of mine, good for a chuckle, I promise.) Link to comment Share on other sites More sharing options...
rhino6303 Posted January 17, 2023 Share Posted January 17, 2023 I had to repair my alternator connector wires. My battery light and brake light started coming on off and on and then the ER IU this morning. A quick cut and re-crimp and we're all good. 4 Link to comment Share on other sites More sharing options...
Dragonempress Posted January 17, 2023 Share Posted January 17, 2023 Just got her some new wheels and tires put on her, I decided to go with 235/45/17 instead of her 215/45/17 in hopes she'd look a little more beefy, I also rolled the fenders since I added wheel adapters to accommodate the poke fitment of the new WRX wheels. I'm pretty happy with the result. I also got her some fresh lower control arms, sway bars, tie rods and engine mounts installed. I want to update all of her suspension this year if possible. I discovered that her left side is about half an inch lower than the right side. I'd like to get some coil overs in the future. 3 Link to comment Share on other sites More sharing options...
DoctorDaveLGT Posted January 17, 2023 Share Posted January 17, 2023 @KZJonny I've got a spare set of rad mounts I can send you. They'll either be brand new OEM mounts or brand new Mishimoto mounts, OR I can send you some used TorqueSolutions mounts but they don't have the rubber in them anymore so probably not ideal ha. Can't say which one it will be for certain though but I think I can make some time this weekend to find out. Quick back story, I've got one of Madrig's CF rad covers and the TS mounts I had on the car didn't fit underneath it (they're beefy). I cut the rubber on them to try and get creative but nope, me was dumb. Ended up buying the OEM & Mishimoto sets sometime back to play around with and just haven't found the time to actually do that. 3 1 Link to comment Share on other sites More sharing options...
WRX USA Posted January 17, 2023 Share Posted January 17, 2023 46 minutes ago, DoctorDaveLGT said: @KZJonny I've got a spare set of rad mounts I can send you. They'll either be brand new OEM mounts or brand new Mishimoto mounts, OR I can send you some used TorqueSolutions mounts but they don't have the rubber in them anymore so probably not ideal ha. Can't say which one it will be for certain though but I think I can make some time this weekend to find out. Quick back story, I've got one of Madrig's CF rad covers and the TS mounts I had on the car didn't fit underneath it (they're beefy). I cut the rubber on them to try and get creative but nope, me was dumb. Ended up buying the OEM & Mishimoto sets sometime back to play around with and just haven't found the time to actually do that. I’m fairly sure he is looking for lower radiator mounts, not the upper mounts that would compete with a carbon fiber radiator cover. I also have a set of the upper mounts I’d be happy to send you. 2 Link to comment Share on other sites More sharing options...
BoozeRS05 Posted January 18, 2023 Share Posted January 18, 2023 I deleted a comment quickly after realizing they were talking about the lower mounts too. If@DoctorDaveLGT wants rid of his torque solution upper mounts I would grab those though 1 1 EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
DoctorDaveLGT Posted January 18, 2023 Share Posted January 18, 2023 (edited) Ah shit. Yep, totally missed that. The drain of tax season has already set in. @BoozeRS05 they're all yours if you want them. Edited January 18, 2023 by DoctorDaveLGT Link to comment Share on other sites More sharing options...
Enlight Posted January 18, 2023 Share Posted January 18, 2023 On 1/16/2023 at 1:11 PM, SubOperator said: I would have no problems giving them to you but chances are I won't be getting them off soon. Did you check if this is something that can be purchased from Subaru? Looks like this is the part # you want 45124AG01A https://parts.parkersubaru.com/p/subaru__Legacy/Radiator-Mount-Bracket-Lower-Radiator-Mount-Bracket/49251899/45124AG01A.html I wonder whether this part is interchangeable with 45124AG010 which is only $10. I cannot tell the difference between the photos. I will give them a shot but I'm about a month from reinstalling my engine. 1 1 muFreight.co A JDM Container Sharing Service from Japan to NYC Website | Instagram | Email Bessie II's Thread Link to comment Share on other sites More sharing options...
SubOperator Posted January 18, 2023 Share Posted January 18, 2023 1 hour ago, Enlight said: I wonder whether this part is interchangeable with 45124AG010 which is only $10. I cannot tell the difference between the photos. I will give them a shot but I'm about a month from reinstalling my engine. Hmm, 01A should be just a revision of 010 if I understand Subaru parts' naming correctly. That's a big if though. For $10 it's worth just trying. The 'what this fits' lists 08-09 WRX/STI which is pretty much BL/BP engine bay. Interesting for sure. 2 2005 LGT Wagon Limited 6 MT RBP Stage 2 - 249K 2007 B9 Tribeca Limited DGM - 272K SOLD - 2005 OB Limited 5 MT Silver - 245K SOLD - 2010 OB 6 MT Silver - 205K Link to comment Share on other sites More sharing options...
SubOperator Posted January 18, 2023 Share Posted January 18, 2023 Cleaned MAF sensors on LGT and Tribeca. Received new winter wheels for wife's 22 MDX. Enkeis are light for sure. For LGT received the coveted euro stereo unit. Ready to do my own conversion for properly oriented (LHD) HVAC controls with 2DIN faceplate. Took me a week from starting to look for the unit to receiving it: 3 1 2005 LGT Wagon Limited 6 MT RBP Stage 2 - 249K 2007 B9 Tribeca Limited DGM - 272K SOLD - 2005 OB Limited 5 MT Silver - 245K SOLD - 2010 OB 6 MT Silver - 205K Link to comment Share on other sites More sharing options...
SubOperator Posted January 18, 2023 Share Posted January 18, 2023 (edited) MDX with new winter set: Edited January 18, 2023 by SubOperator 5 2005 LGT Wagon Limited 6 MT RBP Stage 2 - 249K 2007 B9 Tribeca Limited DGM - 272K SOLD - 2005 OB Limited 5 MT Silver - 245K SOLD - 2010 OB 6 MT Silver - 205K Link to comment Share on other sites More sharing options...
KZJonny Posted January 18, 2023 Share Posted January 18, 2023 (edited) 16 hours ago, Enlight said: I wonder whether this part is interchangeable with 45124AG010 which is only $10. I cannot tell the difference between the photos. I will give them a shot but I'm about a month from reinstalling my engine. !!! Those look damn close, and for a difference of ~$100, I’m willing to enlarge a bolt hole or make a spacer bracket… That seems like a reasonable price for some stamped metal parts. EDIT: $15.88 CAD/ea delivered to my local dealership, so I'll be the Guinea pig on this one. I have a set of GT lowers supports from a friend that were going to be templates for me to make new ones from SS. Since that's a project that never happened...... I will take some photos to compare the two part numbers. Fingers Crossed. Edited January 18, 2023 by KZJonny 3 Link to comment Share on other sites More sharing options...
Enlight Posted January 18, 2023 Share Posted January 18, 2023 1 hour ago, SubOperator said: MDX with new winter set: That matching cargo box looks great. 1 muFreight.co A JDM Container Sharing Service from Japan to NYC Website | Instagram | Email Bessie II's Thread Link to comment Share on other sites More sharing options...
Febreze Mee Posted January 18, 2023 Share Posted January 18, 2023 For real Sub! The MDX looks fantastic! 1 MILKRUN - Click Here Link to comment Share on other sites More sharing options...
NORULZleggy Posted January 18, 2023 Share Posted January 18, 2023 11 hours ago, SubOperator said: MDX with new winter set: Why no Assent? Link to comment Share on other sites More sharing options...
SubOperator Posted January 18, 2023 Share Posted January 18, 2023 17 minutes ago, NORULZleggy said: Why no Assent? Funny that you ask. It was meant to be an Assent. Pretty much set on it. But after going and test driving one we couldn't shake the feeling it was an outgrown modded WRX, loud and jerky. Out Tribeca at 15 years old is much nicer and more pleasant on the road. When we unexpectedly stumbled upon Acura dealership on the way home from Subaru, stopped by and were shown just released 22 MDX. Test drove it and was all we wanted. At the end , turbo 4 and CVT lost to 6 cyl non turbo and 10 speed auto. I like the amenities in MDX too but it was the driving dynamics that decided the purchase. Subaru shouldn't have gone with 4 banger and CVT on such a big car as Assent, the EZ36 and updated AT (8 speed would be fine) would server Assent much better. I have heard similar opinions from few people who eyed Assent but ultimately passed on it for the same reason. Do not want to start a holy war about it, but that's my story. 3 2005 LGT Wagon Limited 6 MT RBP Stage 2 - 249K 2007 B9 Tribeca Limited DGM - 272K SOLD - 2005 OB Limited 5 MT Silver - 245K SOLD - 2010 OB 6 MT Silver - 205K Link to comment Share on other sites More sharing options...
NORULZleggy Posted January 18, 2023 Share Posted January 18, 2023 26 minutes ago, SubOperator said: Funny that you ask. It was meant to be an Assent. Pretty much set on it. But after going and test driving one we couldn't shake the feeling it was an outgrown modded WRX, loud and jerky. Out Tribeca at 15 years old is much nicer and more pleasant on the road. When we unexpectedly stumbled upon Acura dealership on the way home from Subaru, stopped by and were shown just released 22 MDX. Test drove it and was all we wanted. At the end , turbo 4 and CVT lost to 6 cyl non turbo and 10 speed auto. I like the amenities in MDX too but it was the driving dynamics that decided the purchase. Subaru shouldn't have gone with 4 banger and CVT on such a big car as Assent, the EZ36 and updated AT (8 speed would be fine) would server Assent much better. I have heard similar opinions from few people who eyed Assent but ultimately passed on it for the same reason. Do not want to start a holy war about it, but that's my story. I totally agree with you on this. That tank needs some more power. They are nice, I was at the auto show last weekend and was sitting in one. But I need a bigger motor in that thing. 2 Link to comment Share on other sites More sharing options...
xt2005bonbon Posted January 18, 2023 Share Posted January 18, 2023 I know this is subjective, but I still don't like the look of the Ascent. I am trying hard to like it each time I see one but it's not working :(. It looks like a much larger Forester to me. Other brands are doing a much better job in the styling department IMO. 4 Link to comment Share on other sites More sharing options...
Gex Posted January 19, 2023 Share Posted January 19, 2023 I need just the bottom of the double din for heater controls. Anyone have just the bottom panel? Ill probably just end up getting the whole AVO kit. but figured I'd ask. I want my defroster back. 1 Link to comment Share on other sites More sharing options...
SubOperator Posted January 19, 2023 Share Posted January 19, 2023 6 hours ago, Gex said: I need just the bottom of the double din for heater controls. Anyone have just the bottom panel? Ill probably just end up getting the whole AVO kit. but figured I'd ask. I want my defroster back. There was whole JDM kit in FS yesterday 1 2005 LGT Wagon Limited 6 MT RBP Stage 2 - 249K 2007 B9 Tribeca Limited DGM - 272K SOLD - 2005 OB Limited 5 MT Silver - 245K SOLD - 2010 OB 6 MT Silver - 205K Link to comment Share on other sites More sharing options...
SilentJ20 Posted January 19, 2023 Share Posted January 19, 2023 (edited) 6 hours ago, Gex said: I need just the bottom of the double din for heater controls. Anyone have just the bottom panel? Ill probably just end up getting the whole AVO kit. but figured I'd ask. I want my defroster back. Wait, that last sentence makes me think I messed something up. Does the regular AVO JDM kit break rear defroster? Or am I misreading that? It's probably something else, but my defroster doesn't work, lol. EDIT: The light comes on and I can hear a relay click, though. Makes me think my issue is elsewhere. Edited January 19, 2023 by SilentJ20 Link to comment Share on other sites More sharing options...
Underdog Posted January 19, 2023 Share Posted January 19, 2023 Swapped in a new battery and tidied up the wiring a bit to make the next swap easier. This involved putting a marine terminal on the negative post and re-terminating the negative cable with a 5/16” ring (which fits through the hole I drilled for the grommet - unlike the original battery lug terminal). I also moved the fuel pump fuse to the exterior of the box so it isn’t in the way when you’re trying to remove/install the battery. I got 11 years out of the last Deka AGM, here’s hoping this one lasts the same for the next owner (whoever you are). 3 The Crimson Dynamo Link to comment Share on other sites More sharing options...
Gex Posted January 19, 2023 Share Posted January 19, 2023 17 minutes ago, SilentJ20 said: Wait, that last sentence makes me think I messed something up. Does the regular AVO JDM kit break rear defroster? Or am I misreading that? It's probably something else, but my defroster doesn't work, lol. EDIT: The light comes on and I can hear a relay click, though. Makes me think my issue is elsewhere. This is for my race car. I just need front defroster. PO disconnected the heater core and eliminated the panel when they put in roll cage. 1 Link to comment Share on other sites More sharing options...
Gex Posted January 19, 2023 Share Posted January 19, 2023 (edited) 44 minutes ago, SubOperator said: There was whole JDM kit in FS yesterday Asking $300 the kit is only $265 shipped new from AVO Edited January 19, 2023 by Gex 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now