Febreze Mee

Did someone say Cayman?!

This was that very drive. It's when we went with Corey up to Crescent Lake bc Hurricane Ridge was closed. @ElijahHooper we have completely thread jacked this, and I am sorry for that.

Someone who gets it! Btw we play like that every single weekend, and more in the summers. Specifically, on that very road. I know I've sent the invite to you too. Shoot, I was driving that road every night in November of 2023. And even had @Captain Redbeard, @boxkita, and a bunch of the cars throughout my build thread there for a few runs before taking off on vacation in December. Come out next time!

Highlighted times were the best of our four morning runs. I came 6 out of 21. I will never claim my EJ253 is fast, but since @KZJonny brought it up lol, this was my standing at one of the AutoX events last summer. Not exactly an apples-to-apples comparison. And although the ppl I drive with don't time our uphill/downhill runs in the mountains, I'm still successfully punching above my weight. OP please yield to everything said in this thread. 90's JDM twin turbos are expensive to keep up with, and high maintenance. Add the headache and expense of swapping, and not a lot of ppl want to invest the effort that you're discussing. However, if you pull it off, I'm here to see it!

If winners get a prize, I'll put my ticket towards "unfinished fuel pump wiring." Not that I've heard of a lot of these getting stolen.

I think I might dig out my spare OEM hatch struts this summer too. I have way to much to do to the car. Good finds @alex0856.

You could achieve your minimum post count much quicker if you introduced yourself in the "New Member" section, and contributed a little to the forum.

But your exterior looks so good without it Def a fan of the OEM optional spoiler with 3rd brake light.

Let us know what caused the knock, if you come to find out.

Oh no! Time for a new engine.

Welcome to the forums Livanda! Please take some time to visit the New Members section and give a small intro. As for alternative temp sensor locations, I have an auxiliary coolant temp gauge mounted, and I plumbed into the back of the coolant cross over pipe. I, too, wanted to maintain my factory coolant temp sensor. On the pipe, catty-corner on the other side of the factory sensor, you will find additional metal real estate from the casting. This proved to be a great spot to drill and tap for 1/8 PT sending unit. If you decided to go another route, any one of the ports you plug a block heater into would suffice, so long as you had the right conversion plug to fill it, so the new plug could take a temp sensor. Here is an example of what my set up looks like for my water temp gauge: Coolant temp gauge circled in yellow above. The red circle is where I tapped. And the red arrow shows the route I took with the wires.

Ooh, an easy answer. Yes! Sell it, and get "a used WRX Impreza with a 5 or 6-speed manual transmission in mint or pristine condition."

I knew you were close, but I didn't know you were that close. Puyallup here too. And now that you mention it, I KNOW I've seen you on 512, bc I've only ever seen one Spec B in the area. Is your either Spec B DGM or BSM?

I like milkruns.

Classic! The above should help. I had replaced my passenger side last fall, and had referenced this, and parts.subaru.com, for PN#s.

Fun fact: 2006 Outback 2.5i's also come with the same PN# of the desired STi pan. If you wanted one dirt cheap, I'm sure you could find one in a Pick n Pull. I, too, grabbed my KB pick up and baffle under a packaged deal.

I def prefer your car without the garnishes.

Wow! Tons of activity in here last weekend. It's nice to see all the updates, and activity increase from some of the older members. Ye lads be needin' to hold fast. Ay! Indeed, the storm of [electric] Currents draws nigh. T'would be a shame to not own a classic well into it's 30's. Curious to see how yours turn out. I really wanted to do this last year, but did not have the time, and completely FUBAR'd my spare.

Black interior? Do you have the extending armrest? Is the condition of the armrest cover perfect/near perfect? Pics?

*Eyes closed *Hands on ears* *Murmurs* I don't need it. I don't need it. I do not need it. I. Do. Not. Need. It.

I love this for us!

Please post plenty of pictures when finished?

+1 for 425 Motorsports. Even giving Judson from 425 a call while trying on helmets can be very enlightening, very knowledgeable.

That was such a fun day! Here's @boxkita 's GR86 from that day.

@boxkita will be the best source. Though I'm sure calling any of the shops still standing in the PNW Shops thread, found in the PNW section, could be a good start too.