I Donated bucko3the7man Posted March 16, 2015 I Donated Share Posted March 16, 2015 I'll be a guinnea pig and take one of your V3 DRS units! Link to comment Share on other sites More sharing options...
I Donated bucko3the7man Posted March 16, 2015 I Donated Share Posted March 16, 2015 Did Jeremy send you the solid model for it or no? If not I'll have to bother him for it ha I bought jeremy's actual prototype one he was using in his car when he parted it out. Link to comment Share on other sites More sharing options...
discojon Posted March 16, 2015 Author Share Posted March 16, 2015 Did Jeremy send you the solid model for it or no? If not I'll have to bother him for it ha No I never got the files. Link to comment Share on other sites More sharing options...
Streetlegal Posted March 16, 2015 Share Posted March 16, 2015 I bought jeremy's actual prototype one he was using in his car when he parted it out. I'll see if he still has the file Link to comment Share on other sites More sharing options...
discojon Posted March 16, 2015 Author Share Posted March 16, 2015 Is the defroster vent pod available for a single guage yet? Would love to hear an update as well. Can't wait to see it finished! I demoed an early version and it was pretty darn close. I haven't heard from Kred for a while. Last we talked he was working on finals I think. I'll look into it. It was very close to complete just needs a few tweaks. Link to comment Share on other sites More sharing options...
trianafrank Posted March 16, 2015 Share Posted March 16, 2015 Will that hold up in a hot car in the Texas heat? Link to comment Share on other sites More sharing options...
trianafrank Posted March 16, 2015 Share Posted March 16, 2015 Link to comment Share on other sites More sharing options...
trianafrank Posted March 16, 2015 Share Posted March 16, 2015 I also did a mean looking Cobra from the Ford Mustang logo, about a foot and a half tall. Link to comment Share on other sites More sharing options...
baconbits Posted March 16, 2015 Share Posted March 16, 2015 I would prefer a defrost vent pod over the dash vent... PayPal ready as soon as it's good. Link to comment Share on other sites More sharing options...
trianafrank Posted March 16, 2015 Share Posted March 16, 2015 http://www.spaceclaim.com/en/Mkting/ppc_STLPrepfor3DPrinting-video-ThankYou.aspx http://www.nfm.com/list.aspx?dsNav=Ntk:primary|3D+printers|3|,Ny:False,Ntpc:Disabled,Ro:0,Aro:0,Ns:p_is_bestseller|101|-1|&dsDS=D:3D+printers&dsCDS=D:3D+printers&q=3D+printers&clickedTabValue=All Link to comment Share on other sites More sharing options...
trianafrank Posted March 16, 2015 Share Posted March 16, 2015 (edited) I worked on the PVR and HRS solar array panels of the space station. We made an extra, replacement part, for each since there is hyper velocity space trash which can hit the panels. http://singularityhub.com/2014/09/24/3d-printer-delivered-to-space-station-launches-new-era-of-space-manufacturing/ Edited March 16, 2015 by trianafrank Link to comment Share on other sites More sharing options...
compsurge Posted March 16, 2015 Share Posted March 16, 2015 Are you some form of 3D printing link-poster? Link to comment Share on other sites More sharing options...
Flinkly Posted March 16, 2015 Share Posted March 16, 2015 or maybe a thread title change (for clarity) is in order * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
discojon Posted March 17, 2015 Author Share Posted March 17, 2015 First layer of 54 DRS Superbeef kits being printed. http://tapatalk.imageshack.com/v2/15/03/16/01ae06392440c70ee100ec40c091ae2b.jpg Link to comment Share on other sites More sharing options...
Outback2.5XT-05 Posted March 17, 2015 Share Posted March 17, 2015 Frikkin' awesome thread and good work@ Discojon. Could you print me a replacement rear cupholder for my 2005 OB wagon? I can send the part if you need it, the little clip on the left hand side broke off of mine and I can't seem to locate just the cupholder (NO way am I spending $350 on a new center console for just the cupholder). I'm also interested in buying some of your drs pieces to ship together if this is possible. Link to comment Share on other sites More sharing options...
discojon Posted March 17, 2015 Author Share Posted March 17, 2015 (edited) Frikkin' awesome thread and good work@ Discojon. Could you print me a replacement rear cupholder for my 2005 OB wagon? I can send the part if you need it, the little clip on the left hand side broke off of mine and I can't seem to locate just the cupholder (NO way am I spending $350 on a new center console for just the cupholder). I'm also interested in buying some of your drs pieces to ship together if this is possible. Possibly on the cupholder. Send me some photos of where its broke. The one on my wagon is actually broke also. Edited March 17, 2015 by discojon Link to comment Share on other sites More sharing options...
I Donated bucko3the7man Posted March 17, 2015 I Donated Share Posted March 17, 2015 I'll take one of your new v3 drs units when they're ready! Link to comment Share on other sites More sharing options...
discojon Posted March 17, 2015 Author Share Posted March 17, 2015 (edited) Still printing away. 30 of these are going to our upside down friends on the libertygt forums. http://i.imgur.com/TI1VmBj.png Edited March 17, 2015 by discojon Link to comment Share on other sites More sharing options...
ripstik Posted March 17, 2015 Share Posted March 17, 2015 30 of these are going to our upside down friends on the libertygt forums. you mean they have a separate forum for aussies and kiwis? Link to comment Share on other sites More sharing options...
s2baru Posted March 17, 2015 Share Posted March 17, 2015 Yup. http://forum.liberty.asn.au/index.php Link to comment Share on other sites More sharing options...
08qsm Posted March 18, 2015 Share Posted March 18, 2015 Anybody try printing a JDM double din yet? Surprised this isn't a bigger question seeing as though the only options right now are ~$300. I would buy the living shit out of one if it can be done for even half that price. Link to comment Share on other sites More sharing options...
compsurge Posted March 18, 2015 Share Posted March 18, 2015 I think this was brought up earlier. discojon might have dimensional capacity in his Lulzbot TAZ now. Link to comment Share on other sites More sharing options...
Flinkly Posted March 18, 2015 Share Posted March 18, 2015 I think the issue is the amount of work to modify your current radio/hvac ecb to get everything to work, rather than designing the appropriate panel. You need to have some pretty good solder skills, cut the ecb just right, and then find room for it all in the dash. 300 is an alright deal for plug and play. But as was said above, the project has been discussed and is in the preverbial qeue Sent from my XT1028 * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
acumenhokie Posted March 19, 2015 Share Posted March 19, 2015 Hi everybody. I'm looking to get a plastic interior part 3D scanned, slightly modified and then 3D printed. I've reached out to a local company I found via https://www.3dhubs.com/ but they want over $1k to do this which I thought was a little much. Anyone have any recommendations or care to comment on what a reasonable price would be for this kind of work? Link to comment Share on other sites More sharing options...
compsurge Posted March 19, 2015 Share Posted March 19, 2015 (edited) What is it? Is it a JDM part for the LGT? Honestly, it's a factory part. You'll waste your time scanning and 3D printing it. The factory part will be better, stronger, and be within spec. EDIT: Buy one if this is the right part: http://parts.subaru.com/showAssembly.aspx?ukey_product=49311283&ukey_assembly=6022950&ukey_make=5806&ukey_model=0&ukey_driveline=0&ukey_trimlevel=0&modelYear=0 Edited March 19, 2015 by compsurge Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now