silentsnow31802 Posted July 24, 2015 Share Posted July 24, 2015 How exactly are these dash rattle stoppers supposed to be installed? There is a very large gap between my dash and my windshield. Is that not where they go? Link to comment Share on other sites More sharing options...
discojon Posted July 25, 2015 Author Share Posted July 25, 2015 How exactly are these dash rattle stoppers supposed to be installed? There is a very large gap between my dash and my windshield. Is that not where they go? They go in that space. One should do it. If your gap is larger than the spacer you can try moving it towards the center of the dash. If it's is still too short pm me and I'll make you a slightly taller set Link to comment Share on other sites More sharing options...
discojon Posted July 26, 2015 Author Share Posted July 26, 2015 I was able to get most of the spoil board done today. Ended up breaking my t-slot bit though. I'm ready to start routing crap. Going to attempt to make a triple gauge pod on the router. Here is my spoil board layout Link to comment Share on other sites More sharing options...
discojon Posted July 26, 2015 Author Share Posted July 26, 2015 Just experimenting with my software. It looks like I can make the triple pods out of solid wood / material. Can't do the double due to the angled design. Here is an idea what it would look like in Padauk. Link to comment Share on other sites More sharing options...
baconbits Posted July 26, 2015 Share Posted July 26, 2015 What about making a double without the angle? One where it could be set back into the cubby (to close the door) like the other ones but not two pieces of plastic glued together... Link to comment Share on other sites More sharing options...
SneakyGT Posted July 27, 2015 Share Posted July 27, 2015 Wow, imagine having wood trim and a triple pod made of the same wood... I thinks it would look super dope. Link to comment Share on other sites More sharing options...
discojon Posted August 3, 2015 Author Share Posted August 3, 2015 The CNC is fully operational now. And.... I just made an offer on a 80W laser cutter / engraver. We shall see how that works out. I have the file for the gauge pods but haven't had time to print any tests yet. I'll work on that this week after I get a few orders out. Link to comment Share on other sites More sharing options...
CasopoliS Posted August 3, 2015 Share Posted August 3, 2015 That router is a great toy to have, can't wait to see the results! Good work man. Link to comment Share on other sites More sharing options...
discojon Posted August 4, 2015 Author Share Posted August 4, 2015 (edited) Just a few videos of the printer at work edit... need to slow down the frame capture rate a bit looks like lol Edited August 4, 2015 by discojon Link to comment Share on other sites More sharing options...
Streetlegal Posted August 4, 2015 Share Posted August 4, 2015 Just a few videos of the printer at work edit... need to slow down the frame capture rate a bit looks like lol Hyper speed printing Looks awesome though. What kind of print times are you looking at? Link to comment Share on other sites More sharing options...
discojon Posted August 4, 2015 Author Share Posted August 4, 2015 Hyper speed printing [emoji38] Looks awesome though. What kind of print times are you looking at? A gauge pod takes about 4 hours. The taillight covers about 2. I have a few more second quality items I'm about to list in the for sale section. Sent from my SAMSUNG-SM-N910A using Tapatalk Link to comment Share on other sites More sharing options...
I3eXa Posted August 5, 2015 Share Posted August 5, 2015 any chance you could be bribed to print that VBG1 hood?!? Link to comment Share on other sites More sharing options...
discojon Posted August 5, 2015 Author Share Posted August 5, 2015 any chance you could be bribed to print that VBG1 hood?!? I could if someone sent me the file Link to comment Share on other sites More sharing options...
I3eXa Posted August 6, 2015 Share Posted August 6, 2015 I could if someone sent me the file Who is this someone and where can he be found?!? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
discojon Posted August 6, 2015 Author Share Posted August 6, 2015 Who is this someone and where can he be found?!? Sent from my iPhone using Tapatalk Its probably me, ill just have to design it Sent from my SAMSUNG-SM-N910A using Tapatalk Link to comment Share on other sites More sharing options...
Streetlegal Posted August 6, 2015 Share Posted August 6, 2015 any chance you could be bribed to print that VBG1 hood?!? what is this VGB1 hood you speak of lol? Link to comment Share on other sites More sharing options...
pipi135 Posted August 6, 2015 Share Posted August 6, 2015 Something I've been working on the last few days http://i.imgur.com/eRW0SEM.jpg http://i.imgur.com/B3wBgqe.jpg Link to comment Share on other sites More sharing options...
Flinkly Posted August 6, 2015 Share Posted August 6, 2015 is that a hose connection to pipe AC direct into your racing helmet? * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
pipi135 Posted August 6, 2015 Share Posted August 6, 2015 Gauge pod. I just don't have a gauge yet. Link to comment Share on other sites More sharing options...
Flinkly Posted August 6, 2015 Share Posted August 6, 2015 yeah, giving you a heard time. 52 or 60 mm? looks pretty hefty, but that could just be the small size of the vent. * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
pipi135 Posted August 6, 2015 Share Posted August 6, 2015 52mm. That and a few mm are lost on each side from the insert part Link to comment Share on other sites More sharing options...
I3eXa Posted August 7, 2015 Share Posted August 7, 2015 Its probably me, ill just have to design it Sent from my SAMSUNG-SM-N910A using Tapatalk Well let me know what it will take. what is this VGB1 hood you speak of lol? non-existant....so far Link to comment Share on other sites More sharing options...
Streetlegal Posted August 7, 2015 Share Posted August 7, 2015 Well let me know what it will take. non-existant....so far What is it even? I can design it as well and send it over to discojon to print it. Link to comment Share on other sites More sharing options...
I3eXa Posted August 8, 2015 Share Posted August 8, 2015 (edited) What is it even? I can design it as well and send it over to discojon to print it. a sunshade/hood like these for this vent gauge that's kinda like that can shield it...make sense? Edited August 8, 2015 by I3eXa Link to comment Share on other sites More sharing options...
dvinke1 Posted August 8, 2015 Share Posted August 8, 2015 Something I've been working on the last few days http://i.imgur.com/B3wBgqe.jpg What gauge cluster is that?? Looks good Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now