sab6300 Posted June 11, 2014 Share Posted June 11, 2014 Do you see a code on your locks? For example mine says "E" and then a 3 digit number? Link to comment Share on other sites More sharing options...
kyleap007 Posted June 11, 2014 Share Posted June 11, 2014 They say "79" on all the end pieces where one might turn with a key to lock them. I don't see any other numbers.. Link to comment Share on other sites More sharing options...
sab6300 Posted June 12, 2014 Share Posted June 12, 2014 Yeah I figured they wouldn't use a standard key. I have a spare that you could have had if it was the same lock. I doubt a dealer would be able to help, but it couldn't hurt to ask. If not maybe a locksmith? Good luck Link to comment Share on other sites More sharing options...
discojon Posted May 27, 2015 Share Posted May 27, 2015 After looking for many months for a set of Canadian bars, I ended up buying the Yakima Whispbar S22 with K325 fit kit. According to Yakima AU's website and in speaking with US customer support, it should work. I will have them here on this Friday 5/29 and i'll update with fitment. Here's hoping.... Link to comment Share on other sites More sharing options...
reeceBMX70 Posted May 28, 2015 Share Posted May 28, 2015 I'm looking here for some help. I bought a pair of rail grabs for the legacy the other day, at least that's what the picture Showed. I was actually sent the low riders which are pre rail grab. Does anyone know how to get these to work? If not I will just sell them. Link to comment Share on other sites More sharing options...
discojon Posted May 29, 2015 Share Posted May 29, 2015 (edited) Just to update a bit more, In my research i found that the AUDM 4th gen outback has the same roof rails and the USDM 4th gen Legacy as pictured below. The AUDM Liberty (comparable to USDM Legacy) has the flat / deleted roof rails. AUDM Outback / USDM Legacy roof rails http://www.shop1auto.com.au/Images_Roof%20racks/Prorack_roofracks/On-cars/Prorack_solid-rail_mount_Subaru_Outback_800px.jpg AUDM Liberty rails http://ric323.com/30rb/escape11.jpg http://ric323.com/30rb/escape12.jpg Edited May 29, 2015 by discojon Link to comment Share on other sites More sharing options...
discojon Posted May 29, 2015 Share Posted May 29, 2015 (edited) All I want are flush roof rack delete strips....I have been told they are not avail:( +1 The part number for the flush strips are below. These are JDM / AUDM part numbers so it is unknown if US dealers can get these. I can all but guarantee the headliner would have to be dropped to do the swap also. Right: Silver 91046AG002Grey 91046AG022 Left: Silver 91046AG012Grey 91046AG032 Edited May 29, 2015 by discojon Link to comment Share on other sites More sharing options...
discojon Posted May 29, 2015 Share Posted May 29, 2015 The Yakima whispbar setup works perfectly http://images.tapatalk-cdn.com/15/05/29/50fd001057dcebf138438207b9101bb5.jpg http://images.tapatalk-cdn.com/15/05/29/c9f4de611c5d481549a1262dabc8e758.jpg Link to comment Share on other sites More sharing options...
Turkeylord Posted June 2, 2015 Share Posted June 2, 2015 That looks great! Can we get a close-up of one of the towers? Link to comment Share on other sites More sharing options...
discojon Posted June 2, 2015 Share Posted June 2, 2015 http://images.tapatalk-cdn.com/15/06/02/388c6d4378dbb1def6255fb7ad2b0081.jpghttp://images.tapatalk-cdn.com/15/06/02/899b7a63615b5f0bdb33c1c161423181.jpg Link to comment Share on other sites More sharing options...
Turkeylord Posted June 2, 2015 Share Posted June 2, 2015 Slick slick slick. I really like my EZ Riders, but those are nice! Link to comment Share on other sites More sharing options...
Horizontal Opposition Posted July 14, 2016 Share Posted July 14, 2016 For those of you that have been looking for an alternative to the now out of production canadian aero bars, Rhino-Racks has an option that will work and looks great in pictures. http://www.rhinorack.com.au/products/roof-racks/vortex/vortex-sx-black-2-bar-roof-rack_ja1778 . Unfortunately I think the Aussies do not realize our legacy wagons have the same rails as their Outbacks, so this kit does not show up on the american website. But if you drill down to the components of the kit they can be purchased separately here in the U.S. I just got off the phone with their U.S. office and informed them of this. In fact, the kits listed on the US site for the legacy will not fit unless you delete your rails as the AUDM legacy wagons had deleted rails as noted a few posts up. Here are the legs you'd need http://www.rhinorack.com/en-us/products/roof-rack-parts/legs/vortex-sx-leg-x4-_sx004 Along with 2 of these bars. Shown in Silver, but also available in black it looks like. http://www.rhinorack.com/en-us/products/roof-rack-parts/bars/vortex-bar-silver-42-_va106s I haven't pulled the trigger on them yet, so I have no review, but I thought I'd put this out there for those people like me that have stumbled across this thread looking for options. Link to comment Share on other sites More sharing options...
Brock Samson Posted July 19, 2016 Share Posted July 19, 2016 OK....I need your help guys. One of the end caps of my Canadian bars disappeared. What are the chances I can find that part? Its the right hand side one. So bummed. And wow, lots of good looking bars these days. Link to comment Share on other sites More sharing options...
unicorn_violence Posted February 10, 2017 Share Posted February 10, 2017 i have a question, so i purchased a used rhino rack on ebay that said it was for a legacy wagon. after talking with the seller(doesn't seem to know for sure) said its originally for a liberty. is that rack going to fit then? if i remember the liberty roof bars are slight different from a legacy Link to comment Share on other sites More sharing options...
fedaykin Posted February 14, 2017 Share Posted February 14, 2017 I'd be surprised if they are different. Link to comment Share on other sites More sharing options...
SBT Posted February 14, 2017 Share Posted February 14, 2017 (edited) You can see the difference here been a Liberty GT Spec B wagon roof rail (same as JDM) And the USDM Legacy GT wagon roof rail http://static.cargurus.com/images/site/2007/12/22/10/40/2005_subaru_legacy_2_5_gt_limited_wagon-pic-64171.jpeg Liberty rail is not as tall at the Legacy rail - and doesn't seem to have the lock (foot) "grooves" that the USDM version does. Edited February 14, 2017 by SBT fixed USDM pic link - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
fedaykin Posted February 15, 2017 Share Posted February 15, 2017 (edited) US ones look like Outback rails. Might be different: http://www.shop1auto.com.au/Images_Roof%20racks/Rhino_Roof_racks/On-cars/Subaru/Subaru_Outback/Subaru_Outback_03-09_Roofracks_Rhino_SXB_650pix.jpg Liberty: http://www.shop1auto.com.au/Images_Roof%20racks/Rhino_Roof_racks/On-cars/Subaru/Subaru_Liberty/Subaru_Liberty_Wagon_03-09_roofracks_Rhino_RSP_650pix.jpg *edit* Sorry I didn't read your previous post properly, you said "roof bars" and I missed the "bars" bit. Edited February 15, 2017 by fedaykin Link to comment Share on other sites More sharing options...
unicorn_violence Posted February 15, 2017 Share Posted February 15, 2017 thanks for the info guys. my guess is the bars wont fit. but its already shipped, so we will see what happens when they get here! i'm kind of surprised how hard it is to find racks for this car. it seems all the main brands have discontinued any fitment for the legacy wagon. Link to comment Share on other sites More sharing options...
Kojak Posted February 15, 2017 Share Posted February 15, 2017 thanks for the info guys. my guess is the bars wont fit. but its already shipped, so we will see what happens when they get here! i'm kind of surprised how hard it is to find racks for this car. it seems all the main brands have discontinued any fitment for the legacy wagon. I picked up a set of Thule bars and racks from rei last month. On sale, turned out to be gently used. But shipped immediately and cost slightly less than new. Legacy wagons (US) use the 440 specialty railing carrier with an SR2 fit kit to adapt to our existing rails. I snapped up a set before they went entirely extinct. Hope that helps. Link to comment Share on other sites More sharing options...
unicorn_violence Posted February 16, 2017 Share Posted February 16, 2017 so i got the cross bars, and then promptly returned them. they definitely wont fit. i guess the liberty has panels that open on the side rails, allowing the cross bars to then be bolted to the roof. so that ends the debate if they would possibly work or not. thanks for the info Kojak. with your message i was able to search and find the 440 kit and the adapters for pretty cheap, they are on the way. to throw a twist in things though, i also found a set of the Canadian bars for sale in Canada(shortly after buying the 440 kit). i am now struggling to decide whether to return the 440 kit and get those instead lol Link to comment Share on other sites More sharing options...
Beanboy Posted March 10, 2017 Share Posted March 10, 2017 I thought I saw a post here somewhere, but damn if I can't find it again. Regards to switching the OEM Mont Blanc bars from US LGT integrated side rails to fit Outback raised rails. I've got the OEM bars, but want to mount them to a Forester which has raised side rails. Seems that the adjustable arm of the Mont Blanc OEM rack won't reach under the raise rail. I have seen very similar feet that are supposed to fit raised rail applications, but not sure if it is just a switch of the adjustable gripper arm that reaches down and clamps to the side rail. If so, I'd just replace that and keep my current racks. -B http://www.standardshift.com Link to comment Share on other sites More sharing options...
Blue Fox Posted September 22, 2017 Share Posted September 22, 2017 Mont Blanc MB3747-B-02 Black 47" Gripper Load Bar Set These are still available, and are the OEM Legacy Wagon bars, but without the Subaru logo on them. They’re even available on Amazon. http://legacygt.com/forums/showthread.php/05-09-legacy-wagon-crossbars-265222.html Link to comment Share on other sites More sharing options...
Rcnesneg Posted April 13, 2021 Share Posted April 13, 2021 (edited) Updated list - Or make a new thread rather than using search function? OEM Subaru - Discontinued, not generally available. Mont Blanc (OEM), Now sold by Perrycraft. - $324 MB3747-B-02 https://www.perrycraft.com/product/add-load-bars-set-factory-installed-flush-mount-rails-47-inch-black-rectangle-bars-includes Yakima Ridgeline flush bar system with #24 Clip (Available in Silver, Black with many different bars) - $700 https://yakima.com/products/ridgeline-system EZ Rider w/ Small roundbar crossbars https://infolookup.yakima.com/ EZ Rider Locking w/ Small Roundbar Crossbars Railgrab w/ small roundbar Whispbar System - Discontinued? - Good luck finding kit K325! Whispbar Flushbar S22 kit K325 Whispbar Throughbar S15 kit K325 Whispbar HD T15 Kit K325 Roof Rack Bars P15 kit K325 Thule - UK Only - Will need help importing fitting kit 186002. Standard Bars - Foot Pack 7106, Fitting Kit 186002, 108 SquareBars 7121 Wingbars - Foot Pack 7106, Fitting Kit 186002, Wing Evo Bars 108 711100 - $360 Slidebars - Foot Pack 7106, Fitting Kit 186002, Slide Bars 891 Probars - Foot Pack 7106, Fitting Kit 186002, Pro Bars 390 Thule Edge Wingbar, Thule Edge Flush Rail, 720600, Thule WingBar Edge 77, 721200, Kit 186002 https://www.car-roofracks.co.uk/subaru-outback-roof-racks/5-dr-estate-2003-2009-flush-rails https://www.thule.com/en-gb/roof-rack/car-roof-racks/thule-edge-wingbar-_-95xx?car=subaru-outback-5dr-estate-_-GLkY6LQ5Fa Prorack (NZ Only) Prorack S-wing through bars and S15 kit Prorack S-wing Flush Bars and S2 Kit Prorack P-bars + P15 kit Prorack HD Bars + T15 Kit https://www.roofbox.co.nz/pages/product-result?rq=mk_subaru~md_outback~yr_2007~zw_5dr-wagon-flush-rail-mount-sep-2003-aug-2009 Subaru Forester Rails (1999 or equivalent?) - Require modification. Easily found in junkyards. Edited May 5, 2021 by Rcnesneg Link to comment Share on other sites More sharing options...
drsyn67 Posted May 27, 2021 Share Posted May 27, 2021 I found an '03 Legacy (in a junkyard, poor thing) with OEM crossbars. Its a bit of a drive for me (in my '05 with 90K original miles). I do not know what size hex bolts are used. I have a few different sets - but I really don't want to get there and not be prepared. Advice welcomed - thanks. Link to comment Share on other sites More sharing options...
Rcnesneg Posted May 28, 2021 Share Posted May 28, 2021 I found an '03 Legacy (in a junkyard, poor thing) with OEM crossbars. Its a bit of a drive for me (in my '05 with 90K original miles). I do not know what size hex bolts are used. I have a few different sets - but I really don't want to get there and not be prepared. Advice welcomed - thanks. What part of the world are you in? In the US, a US domestic market 2003 legacy is the previous generation and probably won't fit your USDM 05. You need a 2005-2007 Legacy Wagon. https://row52.com/Search/?YMMorVin=YMM&Year=2005-2007&V1=&V2=&V3=&V4=&V5=&V6=&V7=&V8=&V9=&V10=&V11=&V12=&V13=&V14=&V15=&V16=&V17=&ZipCode=&Page=1&ModelId=4158&MakeId=226&LocationId=&IsVin=false&Distance=50 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now