Becks1818 Posted February 22, 2018 Share Posted February 22, 2018 Anyone running the V Style lip in a place that gets a lot of snow? Any issues with it pulling off? I am going to fasten it with the self tapping screws it came with and add some 3m tape as well. Link to comment Share on other sites More sharing options...
brandon.mol Posted February 22, 2018 Share Posted February 22, 2018 Most important lawn mower mod: https://www.amazon.com/Swagman-80980-To-Go-Clip/dp/B000YZI6SY Link to comment Share on other sites More sharing options...
Bootyologist Posted February 22, 2018 Share Posted February 22, 2018 Most important lawn mower mod: https://www.amazon.com/Swagman-80980-To-Go-Clip/dp/B000YZI6SYordered!! Sent from my Nexus 5X using Tapatalk Link to comment Share on other sites More sharing options...
Humble Rumble Posted February 22, 2018 Share Posted February 22, 2018 Anyone running the V Style lip in a place that gets a lot of snow? Any issues with it pulling off? I am going to fasten it with the self tapping screws it came with and add some 3m tape as well. Had no issues here in snowy Chicago so far this year. Only used the self tapers on mine as well. You should be good unless you're doing some serious plowing lol. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Becks1818 Posted February 22, 2018 Share Posted February 22, 2018 Had no issues here in snowy Chicago so far this year. Only used the self tapers on mine as well. You should be good unless you're doing some serious plowing lol.Thanks buddy! Link to comment Share on other sites More sharing options...
coco26 Posted February 22, 2018 Share Posted February 22, 2018 Anyone running the V Style lip in a place that gets a lot of snow? Any issues with it pulling off? I am going to fasten it with the self tapping screws it came with and add some 3m tape as well. I will eventually, but before the snow falls I'm going to add washers. The screws have a decent size head, but the holes in my lip were so big, it wouldn't take much for them to pull through. Might want to do that just as a preventative measure if you have some handy. Link to comment Share on other sites More sharing options...
FLlegacy Posted February 22, 2018 Share Posted February 22, 2018 Well how about that...Becks1818 just mentioned the other day the slight rivalry between the USA and Canadian Hockey teams...LOL. Sent from my SAMSUNG-SM-G920A using Tapatalk Link to comment Share on other sites More sharing options...
brandon.mol Posted February 22, 2018 Share Posted February 22, 2018 He jinxed it. Link to comment Share on other sites More sharing options...
Becks1818 Posted February 22, 2018 Share Posted February 22, 2018 Well how about that...Becks1818 just mentioned the other day the slight rivalry between the USA and Canadian Hockey teams...LOL. Sent from my SAMSUNG-SM-G920A using TapatalkLOL It was a good game for both sides. The shootout needs to be abolished. That's no way to lose a game, especially on that platform . Link to comment Share on other sites More sharing options...
cww516 Posted February 23, 2018 Share Posted February 23, 2018 I could definitely get behind changing it to sudden-death 5-a-side 30-minute overtime periods for the quarters through the final (same as the NHL playoffs), but probably not for the prelims. Full-strength OT can make for some pretty long games, which probably doesn't work out well if there's a schedule to keep for either the ice or the TV cameras. I remember watching a Hawks game a few years back that went fairly deep into a 3rd OT period- fun to watch, but it was a late night. Speaking of things that need to be abolished- ties in the NFL. Overtime rules are one of the things I do agree with in college football. Link to comment Share on other sites More sharing options...
Becks1818 Posted February 23, 2018 Share Posted February 23, 2018 I could definitely get behind changing it to sudden-death 5-a-side 30-minute overtime periods for the quarters through the final (same as the NHL playoffs), but probably not for the prelims. Full-strength OT can make for some pretty long games, which probably doesn't work out well if there's a schedule to keep for either the ice or the TV cameras. I remember watching a Hawks game a few years back that went fairly deep into a 3rd OT period- fun to watch, but it was a late night. Speaking of things that need to be abolished- ties in the NFL. Overtime rules are one of the things I do agree with in college football.I love the NHL's 3 on 3 overtime format. Unreal hockey. I would love to see 3 on 3 , 5min periods continuous OT. It would be really fast, wide open hockey and it wouldn't stretch too long. Everyone would be gassed. Link to comment Share on other sites More sharing options...
fredrik94087 Posted February 23, 2018 Share Posted February 23, 2018 wednesday night drags starts march 14th...counting the days! "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
GTEASER Posted February 23, 2018 Share Posted February 23, 2018 wednesday night drags starts march 14th...counting the days!WOOT! I wanna join you and run the GT for a few passes. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
brandon.mol Posted February 23, 2018 Share Posted February 23, 2018 WOOT! I wanna join you and run the GT for a few passes.You can't just take her out of captivity and let her go wild like that. She isn't socialized. You have to ease her into it. Link to comment Share on other sites More sharing options...
SpidermanMTL Posted February 23, 2018 Share Posted February 23, 2018 (edited) is it motul 75w90 300 or the motul 75w90 300 LS? and how many liter for the trans 5? EDIT..... never mind found what I couldn't previously found... Rear diff and 6MT use the same weight From a post a while back: Been liking Extra-S Tightening torque 6MT: 44 N·m (4.5 kgf-m, 32.5 ft-lb) (Aluminum gasket silver) (this is the one gotten from the dealer) 70 N·m (7.1 kgf-m, 51.6 ft-lb) (Copper gasket brown) 70 N·m (7.1 kgf-m, 51.6 ft-lb) (Metal gasket black) Gear oil capacity: 3.7 liters (3.9 US qt, 3.3 Imp qt) Extra S for the rear diff as well Oil capacity: 0.8 liters (0.8 US qt, 0.7 Imp qt) Tightening torque: 49 N·m (5.0 kgf-m, 36.1 ft-lb) Edited February 23, 2018 by SpidermanMTL MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
dgoodhue Posted February 23, 2018 Share Posted February 23, 2018 The LS is for limited slip clutches which we do not have. Motul300 75w90 is what I think your looking for. Link to comment Share on other sites More sharing options...
GTEASER Posted February 23, 2018 Share Posted February 23, 2018 The LS is for limited slip clutches which we do not have. Motul300 75w90 is what I think your looking for.correction...Limited slip diffs. You want Motul Gear300 which is 75W-90. I think Motul 300 is for motorcycles. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
dgoodhue Posted February 23, 2018 Share Posted February 23, 2018 correction...Limited slip diffs. You want Motul Gear300 which is 75W-90. I think Motul 300 is for motorcycles. I never noticed that it was Motul Gear300, good catch! Link to comment Share on other sites More sharing options...
SpidermanMTL Posted February 23, 2018 Share Posted February 23, 2018 (edited) Anyone know where I can find a rear diffuser and spats/side rear?...not side skirts, but the splitters on the rear bumper Edited February 23, 2018 by SpidermanMTL MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
Ellesedil Posted February 23, 2018 Share Posted February 23, 2018 Anyone know where I can find a rear diffuser and spats/side rear?... You mean other than in Japan? Link to comment Share on other sites More sharing options...
Falcor Posted February 23, 2018 Share Posted February 23, 2018 Random thought...want this: https://www.cnet.com/news/print-all-the-3d-things-with-the-monoprice-select-mini-v2-for-179-99/?ftag=CAD7dba523&bhid=21798045461891712546880626381186 On sale for $180. Link to comment Share on other sites More sharing options...
Humble Rumble Posted February 23, 2018 Share Posted February 23, 2018 Anyone know where I can find a rear diffuser and spats/side rear?...not side skirts, but the splitters on the rear bumper Not anywhere on this continent. There's a set of SWP OEM rear spats that have been on Croooober forever. Pretty cheap (only about $25), but shipping will be expensive. I got a shipping quote to Chicago and it was around $80 for shipping. https://www.croooober.com/en/item/6875197 Other than that, you can go with the Ebay 3-piece set that's a clone of the DAMD rear bumper kit. Has a middle piece and two side pieces. The side pieces are fine enough, but the middle piece is a bit of a pain to fit to the USDM bumper, and the fit isn't great. I got mine second hand, so I just have the middle piece. Held on with self-tappers and 3m tape. It does looks nice though. https://www.ebay.com/itm/322693902527 Other than that, there's a bevy of rear lip options, but they're all expensive and all will have to be shipped from Japan, so figure $1000 at least just to start. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
SpidermanMTL Posted February 23, 2018 Share Posted February 23, 2018 Not anywhere on this continent. There's a set of SWP OEM rear spats that have been on Croooober forever. Pretty cheap (only about $25), but shipping will be expensive. I got a shipping quote to Chicago and it was around $80 for shipping. https://www.croooober.com/en/item/6875197 Other than that, you can go with the Ebay 3-piece set that's a clone of the DAMD rear bumper kit. Has a middle piece and two side pieces. The side pieces are fine enough, but the middle piece is a bit of a pain to fit to the USDM bumper, and the fit isn't great. I got mine second hand, so I just have the middle piece. Held on with self-tappers and 3m tape. It does looks nice though. https://www.ebay.com/itm/322693902527 Other than that, there's a bevy of rear lip options, but they're all expensive and all will have to be shipped from Japan, so figure $1000 at least just to start. thanks I don't like the croober model... and I found the ebay one (because thats the set I want) but they don't ship to Canada... MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
Humble Rumble Posted February 23, 2018 Share Posted February 23, 2018 K2Gear also makes a 3-piece kit similar to the DAMD ones, and the fit looks really nice, but they only list them specifically for the Wagon, so I'm not sure if they'd fit the sedan properly. They're also pretty expensive and still have to deal with shipping from Japan. https://page.auctions.yahoo.co.jp/jp/auction/l431837792 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
SpidermanMTL Posted February 23, 2018 Share Posted February 23, 2018 Those are really nice... it's the shipping from Japan that kills me.... I sent the ebay seller a msg, asking if he's willing to ship to Canada waiting on their response. MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now