Nrw Posted March 20, 2013 Share Posted March 20, 2013 this fmic requires a aftermarket intake I presume? Can work with the stock intake Link to comment Share on other sites More sharing options...
Mega Users paintpollz Posted March 20, 2013 Mega Users Share Posted March 20, 2013 this fmic requires a aftermarket intake I presume? I ran into a ton of trouble getting mine to fit with the stocker "Remember Danny - Two wrongs don't make a right but three rights make a left." Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted March 20, 2013 I Donated Share Posted March 20, 2013 Mine fit fine after I cut off the tabs on the side. Link to comment Share on other sites More sharing options...
Mega Users paintpollz Posted March 20, 2013 Mega Users Share Posted March 20, 2013 Mine fit fine after I cut off the tabs on the side. thisssssssssssssssssssssssssssssssssssssssssssss "Remember Danny - Two wrongs don't make a right but three rights make a left." Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted March 20, 2013 I Donated Share Posted March 20, 2013 thisssssssssssssssssssssssssssssssssssssssssssss Uh, doesn't it say to do that many times in this thread? Link to comment Share on other sites More sharing options...
itsme Posted April 16, 2013 Author Share Posted April 16, 2013 Just to let you guys know as always I'm always trying to improve my FMIC. So I found a new fabricator to fix something that I thought that could be better. The 2 1/4" hot side pipe going to the intercooler. I ran mine for years with no problem but with low cars more ground clearance is always better. This is the old way the pipe ran. http://i167.photobucket.com/albums/u156/itsmebryan/20130401_101359_zpse136fc21.jpg Now here is the new pipe: http://i167.photobucket.com/albums/u156/itsmebryan/20130401_103951_zps4ff2d6be.jpg It also moves the pipe away from the frame where some where touching the grounding wire bolt. http://i167.photobucket.com/albums/u156/itsmebryan/20130401_103939_zps7ed6a489.jpg and more clearance over the timing cover and more room for headers. http://i167.photobucket.com/albums/u156/itsmebryan/20130401_103934_zps848ad262.jpg This is going to be included in the new version of my FMIC and anyone with the older version I will sell the pipe for $50 shipped. Pm me and let me know if you are interested so I can make enough extra pipes. I have been running it on my car for the last 2 weeks to make sure everything was ok before I showed it to everyone. Bryan Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
Code Posted April 16, 2013 Share Posted April 16, 2013 Put me on the list. "Striving to better, oft we mar what's well." - Bill Shakespeare - car modder Link to comment Share on other sites More sharing options...
PaSprinter24 Posted April 17, 2013 Share Posted April 17, 2013 me 2 Link to comment Share on other sites More sharing options...
mwm5094 Posted April 17, 2013 Share Posted April 17, 2013 Me 3 Link to comment Share on other sites More sharing options...
korpsepatrol Posted April 17, 2013 Share Posted April 17, 2013 me quatro 2008 6mt Legacy Gt Spec B DGM - Not so Stock/Work in progress 2006 5mt Legacy Gt OBP - Sold 2005 5eat Legacy Gt OBP - RIP R.I.P Coxx Link to comment Share on other sites More sharing options...
quick4dr Posted April 18, 2013 Share Posted April 18, 2013 im in, for a black one. Link to comment Share on other sites More sharing options...
700watts Posted April 18, 2013 Share Posted April 18, 2013 I'm faster than racer - X Link to comment Share on other sites More sharing options...
itsme Posted April 18, 2013 Author Share Posted April 18, 2013 I'm faster than racer - X Hey, don't you have some diapers to change? ;-) Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
700watts Posted April 18, 2013 Share Posted April 18, 2013 Y yes, yes I do...:lol::lol:...the garage is about half way done....need to send you some pics.. Link to comment Share on other sites More sharing options...
Sicotic Posted April 18, 2013 Share Posted April 18, 2013 On the 3rd pic, my piping rubs against the timing cover. The coupler is about 3 inches lower than yours... Anyway to fix that? Link to comment Share on other sites More sharing options...
itsme Posted April 19, 2013 Author Share Posted April 19, 2013 On the 3rd pic, my piping rubs agithe timing cover. The coupler is about 3 inches lower than yours... Anyway to fix that? Have you tried to loosen the t clamp on coupler next to intercooler. Then push pipe up and then tighten the clamps? Bryan Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
charlie_sheen Posted April 19, 2013 Share Posted April 19, 2013 bryan can you post a pic of the new hot side pipe from the front view? does this new version still block the tow hook? Link to comment Share on other sites More sharing options...
itsme Posted April 20, 2013 Author Share Posted April 20, 2013 bryan can you post a pic of the new hot side pipe from the front view? does this new version still block the tow hook? That's the picture I forgot to take. I will take off my bumper skin and post the pictures. Bryan Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
itsme Posted April 23, 2013 Author Share Posted April 23, 2013 Here is the front view. Some said they couldn't see the other pictures from photobucket is this OK? http://i167.photobucket.com/albums/u156/itsmebryan/P1000736_zps64434966.jpg Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
charlie_sheen Posted April 23, 2013 Share Posted April 23, 2013 yes its visible to me. thanks man. looks like ill keep the older version pipe for now since i could dent it a little bit and get the grimmspeed tow hook license bracket in there. i dont think it would happen with that one! Link to comment Share on other sites More sharing options...
Woodstock Posted June 14, 2013 Share Posted June 14, 2013 me! is this still going on? Link to comment Share on other sites More sharing options...
itsme Posted June 14, 2013 Author Share Posted June 14, 2013 I will have the new pipe ready by the end of next month. Bryan Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
itsme Posted August 7, 2013 Author Share Posted August 7, 2013 Just to let you guys know. I will have the updated lower passenger pipe ready to ship on Friday. Bryan Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
spec.B Dream Posted August 7, 2013 Share Posted August 7, 2013 Well, I'm in for the new pipe. The grounding bolt wore a hole in mine. Do we need to PM you? I didn't see on the site where one can order individual pipes. Link to comment Share on other sites More sharing options...
itsme Posted August 7, 2013 Author Share Posted August 7, 2013 Well, I'm in for the new pipe. The grounding bolt wore a hole in mine. Do we need to PM you? I didn't see on the site where one can order individual pipes. Pm me Racer X FMIC for '05-'09 LGTs, '08+ WRX and '10+ LGT,'14+ FXT, and '15+ WRX TMIC Racerxengineering.com Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.