freaksavior Posted December 30, 2014 Share Posted December 30, 2014 (edited) Another possible idea for printing, a trip computer mounting bracket similar to the jdm one you can order for $180? edit: it's $115.52 shipped to my door from japan. Edited December 31, 2014 by freaksavior Link to comment Share on other sites More sharing options...
xt2005bonbon Posted December 30, 2014 Share Posted December 30, 2014 Another possible idea for printing, a trip computer mounting bracket similar to the jdm one you can order for $180? $180 is just ridiculous. Link to comment Share on other sites More sharing options...
I3eXa Posted January 3, 2015 Share Posted January 3, 2015 A lot of great innovative products here. Great work guys....now to order a DRS! Link to comment Share on other sites More sharing options...
discojon Posted January 4, 2015 Author Share Posted January 4, 2015 (edited) Got 2 drs orders in today. Ill get some inventory built back up and ship on Monday. I'm curious to hear feedback on them. I know they can be brittle and several folks have broke them installing them. My Dev unit is still holding strong after several months and the Aussie guys seem pleased also. I also got the laser engraving sorted, finally. Here is a quick sample on cardboard. http://tapatalk.imageshack.com/v2/15/01/03/e5c9efb6943bf32116c93d21deaeaf00.jpg http://tapatalk.imageshack.com/v2/15/01/03/40a0ce19fe0b80309ef70a4a311784a6.jpg Edited January 4, 2015 by discojon Link to comment Share on other sites More sharing options...
DavidInSeattle Posted January 4, 2015 Share Posted January 4, 2015 OK, jumping in here to get in on the defrost vent gauge holder. Probably a DRS too, since I have rattle somewhere that is driving me batty. Link to comment Share on other sites More sharing options...
JJr Posted January 4, 2015 Share Posted January 4, 2015 No issues or rattles with V1 DRS!! Link to comment Share on other sites More sharing options...
Flinkly Posted January 5, 2015 Share Posted January 5, 2015 too lazy to write duplicate post, so follow link for my rev. 1 Aux Panel for easier ECU flashing and datalogging: http://legacygt.com/forums/showpost.php?p=5027876&postcount=50 still some work to be done if anyone else wants one, but feel free to write me and we can work something out for files to discojon (or whomever)... * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
Streetlegal Posted January 6, 2015 Share Posted January 6, 2015 too lazy to write duplicate post, so follow link for my rev. 1 Aux Panel for easier ECU flashing and datalogging: http://legacygt.com/forums/showpost.php?p=5027876&postcount=50 still some work to be done if anyone else wants one, but feel free to write me and we can work something out for files to discojon (or whomever)... That turned out great. However, what is the center connection for that you have jumpered together? Link to comment Share on other sites More sharing options...
Flinkly Posted January 6, 2015 Share Posted January 6, 2015 (edited) That turned out great. However, what is the center connection for that you have jumpered together? The green test connector for flashing new code, opensource style. And yeah, for some reason my car has two wires in the connector. And theres a little bit of discussion on the last page of my build thread about the design, and a cool alternative to that connector (that link was my last post there, only linked a single post though). Sent from my XT1028 Edited January 6, 2015 by Flinkly * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
Evan Posted January 8, 2015 Share Posted January 8, 2015 I'm working on cleaning up the front page of the thread to make it easier to navigate and link to. Thanks to everyone who has offered to help out with design or share what they have designed. I am going to work on a insert for the cubby to hold a phone in landscape orientation tonight. I want a simple and quickly removable way to hold my note 4.I have a Exomount Touch CD in my Legacy and a suction cup version in my wife's car. I think they're great for holding cell phones (my Note 3 with case is about as wide as you can go) and they have a ball fitting on the back that I'm sure you could attach to a custom cubby ball mount. They're available for Amazon for $20-$25. http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html Link to comment Share on other sites More sharing options...
I3eXa Posted January 8, 2015 Share Posted January 8, 2015 The DRS works great! Thanks again http://tapatalk.imageshack.com/v2/15/01/08/e265bc080ecad4cd96d414c03dea1d54.jpg Link to comment Share on other sites More sharing options...
Rhitter Posted January 8, 2015 Share Posted January 8, 2015 everyone else is having much better luck with the V2s then I am. I ordered to sets and so far all but one of the largest ones have shattered. I'll be ordering a v1 at some point to see if I have better luck with it. My OBXT build Link to comment Share on other sites More sharing options...
discojon Posted January 9, 2015 Author Share Posted January 9, 2015 everyone else is having much better luck with the V2s then I am. I ordered to sets and so far all but one of the largest ones have shattered. I'll be ordering a v1 at some point to see if I have better luck with it. Pm me your address and I'll send you a new set and a v1 also Link to comment Share on other sites More sharing options...
discojon Posted January 10, 2015 Author Share Posted January 10, 2015 All current orders printed and Packaged. Link to comment Share on other sites More sharing options...
discojon Posted January 12, 2015 Author Share Posted January 12, 2015 Just sent 5 more packages. The guy at the Post Office went crazy with his stamper and may have damaged some of them. If so, just let me know and i'll send replacements. I'm going to work on either reinforcing the V2's or finding a better way to ship. I'm getting reports that they are getting damaged in the mail. Link to comment Share on other sites More sharing options...
discojon Posted January 16, 2015 Author Share Posted January 16, 2015 Another Update: I'm starting to build a 4'x4' CNC router table. Will be able to do wood / alum / delrin / etc. Not sure what applications this will have for the Community here but I'm open to ideas. For the CNC nerds: CNCRouterParts: PRO4848 kit NEMA 23 drives 2.2k Water cooled Spindle It will be expanded to 96"x48" eventually. http://www.cncrouterparts.com/images/PRO4848-14-1.jpg Link to comment Share on other sites More sharing options...
compsurge Posted January 16, 2015 Share Posted January 16, 2015 Good setup. I prefer linear rails versus wheels, but CNC Router Parts makes good stuff. Chinese 2.2k spindles are typically very good. Link to comment Share on other sites More sharing options...
Evan Posted January 16, 2015 Share Posted January 16, 2015 I think that adding a hood/shade over the gauge pod would be a nice aesthetic enhancement. Link to comment Share on other sites More sharing options...
discojon Posted January 18, 2015 Author Share Posted January 18, 2015 ***Anyone that ordered a V1 kit and had it arrived damaged please send me a PM with your address and I'll send you a a new one and a free V1 also. ** I found out the post office worker was crushing them with his stamp when I was mailing them. No cost for the replacements. I have a better way to ship them now. Link to comment Share on other sites More sharing options...
TheMonaLisa Posted January 30, 2015 Share Posted January 30, 2015 Glad everything got you you in one piece. I don't envy you having to mail out 36 packages now though.. i'd recommend padded mailers as the spacers may get crushed if they are machine sorted. Let me know of there is anything else you Aussies need. Could you post more picts of a triple cubby pod with gauges installed. Interested in buying one. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
TheMonaLisa Posted January 30, 2015 Share Posted January 30, 2015 Can you post more pictures of the triple pod with different types of gauges? I think if you filled up the area from the face to the gauge hole rim so the gauges don't appear to stick out so much it would look better. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
1-3-2-4 Posted January 31, 2015 Share Posted January 31, 2015 Sorry I really haven't been following up here but what gauge pods are still up for sell? Link to comment Share on other sites More sharing options...
discojon Posted February 1, 2015 Author Share Posted February 1, 2015 The 2 + post, and 3 up pods are available. The vent pod is in slow development. Sorry but I don't have any more photos of the pod with gauges in it. Link to comment Share on other sites More sharing options...
big_tom Posted February 1, 2015 Share Posted February 1, 2015 the dash rattle item. Could you please message me some info on this as well as price. Thank you very much Link to comment Share on other sites More sharing options...
1-3-2-4 Posted February 5, 2015 Share Posted February 5, 2015 The 2 + post, and 3 up pods are available. The vent pod is in slow development. Sorry but I don't have any more photos of the pod with gauges in it. I happen to see them on Amazon as well! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now