Rhitter Posted November 19, 2014 Share Posted November 19, 2014 How do I buy the dash rattle stopper? and any pictures of it installed? My OBXT build Link to comment Share on other sites More sharing options...
06lgtspecb Posted November 19, 2014 Share Posted November 19, 2014 Glad you like it. I am working on a rattle stopper that includes an integrated printed tension bar to adjust for dash expansion due to thermal load. The v1 drs is 5$ shipped btw How much will the 2nd version cost? and when will they be available? I may just pick up one of the v1's. Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 How do I buy the dash rattle stopper? and any pictures of it installed? How much will the 2nd version cost? and when will they be available? I may just pick up one of the v1's. The price will be $5 shipped. I'm hoping to have the v2 done this week sometime. Installed correctly you can't see it but I'll take a photo Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted November 19, 2014 Moderators Share Posted November 19, 2014 In for a dash rattle stopper, lol. Let me know when they are available "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 Here is the old version and the prototype side by side. I'll do some testing on the new one today and report back Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 And an installed photo. Not sure this one will hold up as thin as the springs are. http://tapatalk.imageshack.com/v2/14/11/19/f146800eb47f97890e7dba615c703e00.jpg Link to comment Share on other sites More sharing options...
JJr Posted November 19, 2014 Share Posted November 19, 2014 My DRS is installed in the corner, the black dash and the black on the windshield hides it real well. I can't express how much I love my rattleless car. My daughter even found my rear rattle that was driving me crazy too, it was the hanging center seat belt (wagon) latches, they need to be tucked into the cubby. Link to comment Share on other sites More sharing options...
discojon Posted November 20, 2014 Author Share Posted November 20, 2014 (edited) Ok, The V2 DRS is a go. I'm sure it will continue to be upgraded but for now both the V1 and V2 are available. The V1 is a one piece unit and the V2 will be a set of 3 that are all different sizes so you can place them as necessary. links to order DRS V1 DRS V2 Edited November 20, 2014 by discojon Link to comment Share on other sites More sharing options...
discojon Posted November 20, 2014 Author Share Posted November 20, 2014 Working on an couple dash rattle stopper orders. http://tapatalk.imageshack.com/v2/14/11/19/3c577b131e6ea96fc65e9e495c13581a.jpg Link to comment Share on other sites More sharing options...
JJr Posted November 20, 2014 Share Posted November 20, 2014 Silence is golden, until we crank up the tunes. Link to comment Share on other sites More sharing options...
Rhitter Posted November 20, 2014 Share Posted November 20, 2014 So the dash connects to the fire wall in 3 places. Although when I hear a rattle it's usually just the front driver side. Do you need more than one to stop the rattles at all locations? My OBXT build Link to comment Share on other sites More sharing options...
JermTheElf Posted November 20, 2014 Share Posted November 20, 2014 I get a rattle in the front drivers side of the dash randomly. Does this press between windshield and the dash? Link to comment Share on other sites More sharing options...
Rhitter Posted November 20, 2014 Share Posted November 20, 2014 (edited) I get a rattle in the front drivers side of the dash randomly. Does this press between windshield and the dash? Yes, it just pushes the dash down to stop the rattle. I dug through a few threads where people pulled their dashes a part to deal with it. There is a plastic clip that rattles in the firewall that the dash connects too. This presses that connection down so it can't rattle as easily (at all?) Edited November 21, 2014 by Rhitter My OBXT build Link to comment Share on other sites More sharing options...
JermTheElf Posted November 20, 2014 Share Posted November 20, 2014 Yes, it just pushes the dash down to stop the rattle. I dug through a view pictures of threads where people pulled their dashes apart to deal with it. There is a plastic clip that rattles in the firewall that the dash connects too. This presses that connection down so it can't rattle as easily (at all?) I thought so. I've pressed my fingers in there before out of frustration Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted November 20, 2014 Moderators Share Posted November 20, 2014 I currently have a balled up napkin stuffed in there "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
LGTAaron Posted November 20, 2014 Share Posted November 20, 2014 I would love a vent gauge pod Link to comment Share on other sites More sharing options...
SneakyGT Posted November 20, 2014 Share Posted November 20, 2014 (edited) Check the GF forum, they're for sale! Edit: Ooups, not the vent gauge, my badddd. Edited November 20, 2014 by SneakyGT Link to comment Share on other sites More sharing options...
discojon Posted November 20, 2014 Author Share Posted November 20, 2014 I would love a vent gauge pod We are developing one now. Hopefully a few weeks out. Link to comment Share on other sites More sharing options...
Akasa Posted November 20, 2014 Share Posted November 20, 2014 Any way we could get a picture of the Garmin gauge pod in action? Link to comment Share on other sites More sharing options...
discojon Posted November 20, 2014 Author Share Posted November 20, 2014 Any way we could get a picture of the Garmin gauge pod in action? I'd love to but I don't have anything to plug onto it. Feel free to buy one and take some photos:cool: Link to comment Share on other sites More sharing options...
JJr Posted November 20, 2014 Share Posted November 20, 2014 Yes, it just pushes the dash down to stop the rattle. I dug through a view pictures of threads where people pulled their dashes apart to deal with it. There is a plastic clip that rattles in the firewall that the dash connects too. This presses that connection down so it can't rattle as easily (at all?) My dash would rattle more during fall and winter, one stopper in drivers corner, dash rattle is completely gone. I think it may depend on car mileage and roads you traveled or travel to loosen the clips up, 3 V1 or 3 V2 in both corners and center should eliminate all dash rattles. Link to comment Share on other sites More sharing options...
discojon Posted November 21, 2014 Author Share Posted November 21, 2014 The gauge pods and Dash Rattle Stoppers are going like hotcakes! One more gauge pod is going out to cypher0117 today or tomorrow. I'd love to see photos of these installed once you get them. If there are any issues with install or fitment get with me and I'll make it right. I still have one 2 gauge pod with the accessport post available for immediate shipping. Link to comment Share on other sites More sharing options...
diab0lus Posted November 21, 2014 Share Posted November 21, 2014 Could you do a stealth dual gauge pod that retains the factory cubby cover? PLX makes some very short gauges that might work in there. I'm willing to be an alpha tester. I have about 3-4 weeks until I would want to install it. Since my vehicle will be parked on a city street, I'm trying to keep her looking stock. Link to comment Share on other sites More sharing options...
lingling1337 Posted November 21, 2014 Share Posted November 21, 2014 Can anyone confirm RAM mount fitment on the gauge pod with accessory ball? Link to comment Share on other sites More sharing options...
kred Posted November 21, 2014 Share Posted November 21, 2014 Could you do a stealth dual gauge pod that retains the factory cubby cover? PLX makes some very short gauges that might work in there. I'm willing to be an alpha tester. I have about 3-4 weeks until I would want to install it. Since my vehicle will be parked on a city street, I'm trying to keep her looking stock. Sure, I could do that. I'd just need some dimensions of the gauges you'd want. Plenty of room for 2 gauges. Can anyone confirm RAM mount fitment on the gauge pod with accessory ball? It's a 11/16" diameter ball. If the ram mount is different, we could get you a different size ball no problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now