discojon Posted November 12, 2014 Author Share Posted November 12, 2014 (edited) Did you look into angling these towards the driver? Can't with the 3 gauge pod. Simply not enough room. Will these be available for sale? Yeah. I never heard back from testers but mine continues to work. Just pm me and I'll send the info Edited November 13, 2014 by discojon Link to comment Share on other sites More sharing options...
compsurge Posted November 13, 2014 Share Posted November 13, 2014 Not to threadjack, but does anyone have ideas for CNC milling? Link to comment Share on other sites More sharing options...
discojon Posted November 13, 2014 Author Share Posted November 13, 2014 Not sure about milling but I just help kickstart a modular printer with a laser engraver and light CNC attachment Link to comment Share on other sites More sharing options...
compsurge Posted November 13, 2014 Share Posted November 13, 2014 Well that won't be here for a few years once my printer gets in, I'm going to verify my PM-30 CNC conversion components mount well. I've been thinking of things such as battery tie downs, saggy butt spacers, and other parts. Link to comment Share on other sites More sharing options...
JohnnyT Posted November 14, 2014 Share Posted November 14, 2014 Subscribed for more 3D awesomeness! Link to comment Share on other sites More sharing options...
discojon Posted November 14, 2014 Author Share Posted November 14, 2014 (edited) Edit:Â Cancelled GB due to no apparent interest. Edited November 18, 2014 by discojon Link to comment Share on other sites More sharing options...
SpecBamf41 Posted November 17, 2014 Share Posted November 17, 2014 Damn NAV unit.. Useless BNR18g on 93oct Link to comment Share on other sites More sharing options...
discojon Posted November 17, 2014 Author Share Posted November 17, 2014 Damn NAV unit.. Useless You should be able mount the gauge pod if you relocate clock back up top. Not confirmed but just thinking here Link to comment Share on other sites More sharing options...
discojon Posted November 18, 2014 Author Share Posted November 18, 2014 Update: The Gauge Pods are now available!! There are two versions, one that will take 2 52mm round gauges and a post accessory like the accessport; and one that will take 3 52mm gauges. Due to a bad price point judgment call on my part and the fact that I am still working on improving the quality of the prints, the price on these is now $50 + $5 shipping. The 3D model is not currently for sale. I have 2 3-pod units available for immediate shipping and will try to maintain that level of inventory on both units. Please watch the For Sale Section for the listings. Link to comment Share on other sites More sharing options...
JJr Posted November 18, 2014 Share Posted November 18, 2014 Dash Rattle Stopper. Installed in my car just now. Going to test it tomorrow. Awesome design, I can't make my dash rattle now:eek: thx so much, discojon!! Link to comment Share on other sites More sharing options...
compsurge Posted November 18, 2014 Share Posted November 18, 2014 FWIW, I bet you could make the dashboard rattle stopper in a group buy with great success. Another thing would be saggy butt spacers. I have this already CADed and it fits perfect (I made some by hand previously for myself and another member). Link to comment Share on other sites More sharing options...
SpecBamf41 Posted November 18, 2014 Share Posted November 18, 2014 Has there ever been a company that makes scoops for our cars? I feel I need more air. BNR18g on 93oct Link to comment Share on other sites More sharing options...
JJr Posted November 18, 2014 Share Posted November 18, 2014 A DRS stage2 is in the works. Link to comment Share on other sites More sharing options...
discojon Posted November 18, 2014 Author Share Posted November 18, 2014 FWIW, I bet you could make the dashboard rattle stopper in a group buy with great success. Another thing would be saggy butt spacers. I have this already CADed and it fits perfect (I made some by hand previously for myself and another member). I don't trust plastic as a suspension component. Sorry. Link to comment Share on other sites More sharing options...
discojon Posted November 18, 2014 Author Share Posted November 18, 2014 A DRS stage2 is in the works. Awesome design, I can't make my dash rattle now:eek: thx so much, discojon!! Glad you like it. I am working on a rattle stopper that includes an integrated printed tension bar to adjust for dash expansion due to thermal load. The v1 drs is 5$ shipped btw Link to comment Share on other sites More sharing options...
JJr Posted November 18, 2014 Share Posted November 18, 2014 can't wait to upgrade. Link to comment Share on other sites More sharing options...
JmP6889928 Posted November 19, 2014 Share Posted November 19, 2014 Sneak peek. We are so close to production. Just a small spacer away. This was a test print, that's why the middle is out. But it gives me an idea, single DIN mounting option anyone. http://tapatalk.imageshack.com/v2/14/10/13/6676112f2bd3a7f8f07cdff66dab0c55.jpg You know....in looking at this photo and your mention of single din dash mount, wouldn't this be a grand place to mount a very nice stereo system, keep the door on the cubby so it can be hidden, and then have the entire lower portion of the dash between this bezel and the climate controls for ANYTHING you wanted to install there? Gauges, Navigation, Refrigerator, etc. Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 You know....in looking at this photo and your mention of single din dash mount, wouldn't this be a grand place to mount a very nice stereo system, keep the door on the cubby so it can be hidden, and then have the entire lower portion of the dash between this bezel and the climate controls for ANYTHING you wanted to install there? Gauges, Navigation, Refrigerator, etc. Unfortunately to mount this the entire cubby pocket and door gets removed. A single din mount should be doable though. Link to comment Share on other sites More sharing options...
JmP6889928 Posted November 19, 2014 Share Posted November 19, 2014 Unfortunately to mount this the entire cubby pocket and door gets removed. A single din mount should be doable though. And the single din mount stereo would be hidden behind the door, which is not a bad thing. Think of the canvas you would have where the current stereo is though. You would have a lot of room to do custom fitment of a lot of cool things. Just a thought. Link to comment Share on other sites More sharing options...
2000_LegacyOutback Posted November 19, 2014 Share Posted November 19, 2014 This thread is filled with so much awesome!! Link to comment Share on other sites More sharing options...
Code Posted November 19, 2014 Share Posted November 19, 2014 Has there ever been a company that makes scoops for our cars? I feel I need more air. ZeroSports, r-Rev and one other company (whose name escapes me) made extensions/replacements. "Striving to better, oft we mar what's well." - Bill Shakespeare - car modder Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 I am still planning on working on a defrost vent pod soon.  Any other ideas for printed items? Link to comment Share on other sites More sharing options...
I Donated bucko3the7man Posted November 19, 2014 I Donated Share Posted November 19, 2014 (edited) I am still planning on working on a defrost vent pod soon.  Any other ideas for printed items? For a little while there was interest in a vent pod option like Jeremy had, one that fits inside the far left vent pod. I'll see if I can find pictures of what I mean, but I would be very interested in one of those. He didn't end up selling them because the material they used didn't stand up to heat as well as he thought they would, but it sounds like you're using a more durable material.  Edit: http://legacygt.com/forums/showthread.php/dash-vent-gauge-pod-211772.html?t=211772 Edited November 19, 2014 by bucko3the7man Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 For a little while there was interest in a vent pod option like Jeremy had, one that fits inside the far left vent pod. I'll see if I can find pictures of what I mean, but I would be very interested in one of those. He didn't end up selling them because the material they used didn't stand up to heat as well as he thought they would, but it sounds like you're using a more durable material. Â Edit: http://legacygt.com/forums/showthread.php/dash-vent-gauge-pod-211772.html?t=211772Â I sent him a PM asking for permission to use his design. I'll update with what I hear Link to comment Share on other sites More sharing options...
discojon Posted November 19, 2014 Author Share Posted November 19, 2014 Ok, Spoke with the Jerm about the vent pod. We have worked out a deal to bring it to the community. I'll have more information for you all tonight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now