Marvick08GT

Me either

P0171 is usually indicative of a vacuum leak. Possibly turbo inlet, most likely plenum to TGV O-rings. Do you already have the newest orange gaskets? This is probably the most common problem when I get brought subarus that are not running right. Good luck! Edit: forgot this was sidefeed, I remember reading your thread awfulwaffle. Good call to check as far as the misfires.

The new setup : 18x7.5 +48 Prodrive GC-010E Prodrive (Mcgard) Black Spline Drive Lugs Thanks Infosecdad!

Coolant does go into the turbo as well, just not from that hose.

I agree MDSubie4, took me 3 months but I got them to replace the lines from the ABS Back. Lots of arguing, but I did not spend 1 cent.

Found a set of factory TPMS sensors for $20 shipped on eBay (verified working by tester) I also ordered some torque solutions metal stems to go with it. I asked for some pics so I should be able to update soon.

I don't believe the 09 are compatible with the newer system. You need a tool (I have an Autel TS-508, there are cheaper options available) ATEQ Quickset has a summer winter switch mode and can program the subaru tpms computer.

Found a black aluminum N/A hood at the pick and pull down the street. There are no dents, only a few scratches. Should work well until I get it painted. A steal at $54! Edit: I did have to carry it almost half a mile smdh...

? I don't have a carbon fiber driveshaft. I have a brand new subaru driveshaft per my builders recommendations. I have had CF and Aluminum before on different vehicles, you can tell the difference but there is almost always vibration at high speed

Found the correct prosport center cap in Russia to replace the damaged one in the set I just bought. $70 shipped from Russia wasn't so bad (loss of time and sanity!)

Sure did, now I'm on the hunt for 1 center cap. Found 1 in Russia, but still looking! Also found a place that sells the carbon fiber overlay that says prodrive, so once I find a good one I will probably powdercoat and then throw new emblems on. Can't wait to put these on, should be night and day with my factory 18"s and Michelins...

Use a flat rate box from USPS.

Ordered an Autel TS508 TPMS tool. Can clone my existing tpms to the prodrives to make it easier. Also works on almost every other make/model. Lightning sale on Amazon, about 10 more hours! $70 off https://www.amazon.com/Autel-TS508-Relearn-Pressure-Monitor/dp/B089Q4ZC7H/ref=mp_s_a_1_9?adgrpid=57153474638&dchild=1&gclid=CjwKCAjw3riIBhAwEiwAzD3TidqkWkFJRIoHEFewrnzoDlWkwIf2_zUHrfgLIrv0xqRK0XX_4PDBRhoC_WUQAvD_BwE&hvadid=274720156043&hvdev=m&hvlocphy=1018704&hvnetw=g&hvqmt=e&hvrand=125949388926139933&hvtargid=kwd-378326889978&hydadcr=25394_9900571&keywords=autel+ts508&qid=1628343541&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&smid=A2RI3ZKRHWWB28&sr=8-9

The prodrive GC-010E setup and STI front strut bar arrived from InfoSecDad! Thanks again! Still waiting on the rev D mesh grille and grampus folding mirrors! Can't wait for her to be ready..

Yes it will fit if it is complete. It should not be broken or leaking. For $200 can't really go wrong. Good luck

Bought some wheels, jdm strut bar, grille and grampus blue mirrors. Already had the power fold switch and picked up the harness from our boy in (HI) AW4BYT.

Car is at the shop, once they give me the ok I can grab the downpipe. You are on the other coast, shipping is not going to be cheap.

Payment sent for strut bar. Appreciate it!

To the top! Found all of these parts when I moved! Let's goooooo!

How much for the strut bar? Loving the wheels, wish you were closer

Update from Agile: Engine is out and torn down, heads are at the machine shop!

I have a Cobb catted downpipe coming off my car, also has a blanket. (Has extra bung for wideband) Only has about 5k miles on it.

What are the High and Low pressures at idle? 3000rpm? It could be a bad output from the HVAC control, you would have to do some testing when it fails. (Manifold gauges hooked up and a meter or probe to check signal to the compressor (or sensors). Found a diagnostics chart: https://legacygt.com/forums/showthread.php/hvac-test-mode-reseti-fan-seems-slower-than-normal-226170.html

Sorry I sure don't, I remember buying it from Roger Clark Motorsports if that helps. Will be selling it soon along with lots of other stuff, car is in the shop getting a heart transplant! Marck

For the driveshaft you just have to call DSS, not listed but they have it. ~1k