JoeInOregon

Man I will have to message him, I mentioned in his post I wanted one if he made one , but he didn't reply Sent from my Pixel 3a using Tapatalk

Wow what a bummer, sorry to hear that man. I have been saving for a motor build so I can feel " safe"....this doesn't make me feel warm about and cozy about the idea Sent from my Pixel 3a using Tapatalk

Does is look the right shape for pre facelift usdm bumper ? Sent from my Pixel 3a using Tapatalk

I really can't stand the OEM grille and in looking for replacements I found a rear wing as well. Was hoping someone had some experience or insights with fitment on these. 05 legacy gt sedan , stock front bumper Thanks Joe Spoiler https://www.ebay.com/itm/For-05-08-Subaru-Legacy-BL-Carbon-Fiber-JDM-Style-Rear-Duckbill-Spoiler-Wings-/143637781925?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0 Grille https://www.ebay.com/itm/Front-Lower-Carbon-Fiber-Mesh-Grill-Grille-For-Subaru-Legacy-05-07-Carbon-Fiber-/193579943417?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=711-127632-2357-0 Sent from my Pixel 3a using Tapatalk

That inferno wrap really isn't outrageously expensive either....wish I saw this post first , guess we will see if the dei holds up to daily driver levels Sent from my Pixel 3a using Tapatalk

Wow that is sad to hear, I don't have access to any of the products you mentioned unfortunately. I may be able to oder in large quantity but no one is stocking anything close. In common HVAC work most ou heat mitigation is done with double wall pipe and air gap, most furnaces even especially modern ones require very little internal heat management , so it's not even common in the manufacturing Sent from my Pixel 3a using Tapatalk

I have a AVO one for sale....the perin and AVO are the same and there is an eBay clone available that people have had decent luck with, I have seen them side by side and the quality is not the same on the eBay, but it's less than 300 Sent from my Pixel 3a using Tapatalk

Also worth mentioning it held up well to to road debre on the TT , the TT was low as shit and it even took quite a few scrapes before it got ratty Sent from my Pixel 3a using Tapatalk

I really like the DEI titanium "while DEI's titanium wrap, using LR technology, is capable of handling direct continuous heat up to 1,800 degrees F and radiant heat up to 2,800 degrees*' Wile I have not yet been able to test on my legacy I ran it on my Audi TT and it worked great I did a pretty heavy overlap when wrapping my dp on the legacy, if my boot feels hot after a hot run I will probably add one of there blankets like you linked Sent from my Pixel 3a using Tapatalk

Ya this sounds like an exaggerated version of the "stumble" people get when upgrading , and or removing the damper from the fuel system in the procces.....do these dampers ever fail...kinked or damaged fuel line under the manifold Literally no worthwhile experience specific to this car but sure seems fuel related Sent from my Pixel 3a using Tapatalk

Sorry didn't see the PM's responded Sent from my Pixel 3a using Tapatalk

Yes it fits the Perrin/AVO fine....the process west sits to high and you have to trim hood liner and it still hits the hood Sent from my Pixel 3a using Tapatalk

Willing to accept trades for vintage watches Sent from my Pixel 3a using Tapatalk

Consolidated For sale thread. All prices are before shipping and pay pal fees. Friends and family preferred but happy to do eBay or goods and services if you cover the fee. TMIC-----Sold Fully wrapped in DEI reflective heat tape , used additional DEI high temp adhesive to assure good bond. Top bolt is re threaded and new hardware included. I thoroughly cleaned the exterior and interior as well as test ran on my car and is functioning perfectly. Some rubs on bottom but not affecting function. AVO PBV Valve------Sold Love this Valve , has a plate you can remove for partial vent to atmosphere, does not affect air fuel ratios and sounds great, not super loud but nice little hiss, if it would fit with my Process West I would keep it. Perrin Throttle Body hose Used in good condition, clamps included 30 bucks shipped on this AVO Intake and box, The box and hardware are new however the top of the box had some marks, I vinyl wrapped it looks ok I could have done better, will include another peice of viny, I thinks it looks well enough but you judge can always paint. The intake itself is powder coated black and is in reasonable shape , the filter actually cleaned up nice and is ready to go but has some rub threw on the exterior metal, new filters are available Price on this is 200....reduced 175 ..deals to be made if you purchase the TMIC as well. Would be a cool matched set and was my original plan before boxita tempeted me with rare goodies SPT Intake--- Sold Sold All hardware included , filter could use a clean No tune required for this intake according to Subaru. Price 125 Feel free to ask for additional pictures Thanks for looking Joe Sent from my Pixel 3a using Tapatalk

Few shots of the nameless installed Sent from my Pixel 3a using Tapatalk

Installed Madrig carbon fiber extended hood scoop and Boxita custom aluminum splitter for the process west today. Before and after as promised Sent from my Pixel 3a using Tapatalk

Will start by saying I'm far from the right person to ask but sounds fuel related, clogged filter, dirty injectors. Also more info when it started if you had this issues sense you got it, stock or tune , any fuel system modification extera, and some logs of some kind. Fuel filter and some Lucas oil injector cleaner is a good place to start if you have no codes. Sent from my Pixel 3a using Tapatalk

Adding exhaust porn to build thread. Nameless axle back with 5inch mufflers currently catted stock downpipe , and mid pipe. Idle and cold start and pretty quiet, bit of rumble at low rpm , no drone, honestly a bit quiet for my taste even when you step on it Fit on these was great. Buttery welds. Fast shipping. Sent from my Pixel 3a using Tapatalk

It is wrapped from turbo end to the chassis mounting bracket, clamps on both ends .....is that bad ? Sent from my Pixel 3a using Tapatalk

No idea if this is your problem but is common on old VW's......vapor lock can be caused by problem in the evap system ......try taking your gas cap off and letting it warm up Sent from my Pixel 3a using Tapatalk

Is the Cobb bpv taller than Factory ?......my AVO unfortunately is hitting the hood with the procces west tmic ? Sent from my Pixel 3a using Tapatalk

Thank you I'm looking forward to it as well, I'm guessing low 300's with full power early with the corn juice. Went over board on fueling hoping to leave room for a 20g and motor build down the road. Sent from my Pixel 3a using Tapatalk

Little progress today, wrapped the down and up pipe. Daughter helped a bit , she also helped on the exhaust last month and is good at handing me tools Used one 50 foot roll, double wrapped the first bit of the down pipe nearest the turbo. Used DEI titanium , I highly recommend buying local the roll I ordered from Amazon was fake. Discovered a cool product in the process, kit to make any size hose clamp. STEELSOFT Hose Clamp Assortment Kit, Cut-To-Fit 12 FT Strap + 8 Stronger Fasteners, 304 Stainless Steel, Large Long Worm Gear Band Hose Clamps Metal Clamps DIY https://www.amazon.com/dp/B08Y6LSL3R/ref=cm_sw_r_apan_glt_fabc_CG9A50ZXAJRR5FHQMPBA?_encoding=UTF8&psc=1 Sent from my Pixel 3a using Tapatalk

Yes I can do that for sure Sent from my Pixel 3a using Tapatalk

Yes I can do that Sent from my Pixel 3a using Tapatalk