jblackwell1 Posted December 15, 2011 Author Share Posted December 15, 2011 Itll be done by the time i go back! Wrapping up odds and ends now, andy i know your in finals right now but here is the exact flywheel i have that i finally found a part number to match it to since none of the clutch gear matched anything. http://www.exedyusa.com/oe/Clutch_Specifications shouldnt my clutch fit that since it says legacy 05-06? Regardless i am a confused clutch and a couple small parts away from getting ready to drop this thing back in. As long as the clutch fits and im just an idiot i dont see why it wont be trying to go in by monday at the latest. Link to comment Share on other sites More sharing options...
jblackwell1 Posted December 15, 2011 Author Share Posted December 15, 2011 Cleared up the clutch issue, def not the correct clutch for the flywheel so i am going to swap it for the 06 wrx and i think thatll fix that issue. Besides that im just gonna pick up a few oil parts from the local stealership and i should be rockin and rollin. heres a few pics for shits and gigs. http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/010-5.jpg http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/008-5.jpg http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/019-4.jpg http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/IMAG0010.jpg Link to comment Share on other sites More sharing options...
Turkeylord Posted December 15, 2011 Share Posted December 15, 2011 Sweet! Good to see you're still makin progress. Good luck getting her finished up! Link to comment Share on other sites More sharing options...
Max Capacity Posted December 15, 2011 Share Posted December 15, 2011 Nice pictures. Make sure you put good clamps on the fuel lines. Can you get a picture of the back of the drivers side head with the banjo bolt there ? How about a shot of the PCV valve too ? 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
brawline Posted December 19, 2011 Share Posted December 19, 2011 damn man sorry to hear but looks like it is going to turn out for the best. if you dont mine me asking where did you buy it? Link to comment Share on other sites More sharing options...
jblackwell1 Posted January 5, 2012 Author Share Posted January 5, 2012 Motor will be getting dropped in tomorrow. Im very very close to having it completely ready today but need to spend some time figuring out odds and ends today to drop her in tomorrow. Its about damn tmie too. Link to comment Share on other sites More sharing options...
frank_ster Posted January 5, 2012 Share Posted January 5, 2012 so how many consecutive hours to assemble and install the engine ? Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
brum Posted January 6, 2012 Share Posted January 6, 2012 Too many lol. End of the night progress. STarting up tomorrow http://i122.photobucket.com/albums/o264/rustycoupe/2012-01-05_22-38-39_954.jpg http://i122.photobucket.com/albums/o264/rustycoupe/2012-01-05_22-38-30_406.jpg Link to comment Share on other sites More sharing options...
jblackwell1 Posted January 6, 2012 Author Share Posted January 6, 2012 Def going in tomorrow. Almost went ahead and started tonite but i was lazy. Link to comment Share on other sites More sharing options...
frank_ster Posted January 6, 2012 Share Posted January 6, 2012 hehe good old 30 hour engine assembly time Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
jblackwell1 Posted January 6, 2012 Author Share Posted January 6, 2012 Im registering the car today so after that ill start getting everything ready for the drop in Link to comment Share on other sites More sharing options...
jhawk222 Posted January 6, 2012 Share Posted January 6, 2012 Nice photos. Can't wait to see the finished product. Good luck to you. Link to comment Share on other sites More sharing options...
frank_ster Posted January 6, 2012 Share Posted January 6, 2012 put the plugs in first ! Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
vtbimmer Posted January 7, 2012 Share Posted January 7, 2012 put the plugs in first ! I was thinking the same thing. Love this build Link to comment Share on other sites More sharing options...
brum Posted January 7, 2012 Share Posted January 7, 2012 Lol I put the plugs in last night but no coilpacks. Link to comment Share on other sites More sharing options...
jblackwell1 Posted January 7, 2012 Author Share Posted January 7, 2012 today is the day. wish me luck. Link to comment Share on other sites More sharing options...
frank_ster Posted January 7, 2012 Share Posted January 7, 2012 running yet ? Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
planelazy Posted January 7, 2012 Share Posted January 7, 2012 today is the day. wish me luck. Good Luck ! Thanks for this thread, I always do enjoy looking at pictures as people are building their motors.. hopefully one day, I'll get to join the ranks with a built motor too Link to comment Share on other sites More sharing options...
Guest Posted January 7, 2012 Share Posted January 7, 2012 Good luck! (I had some luck today. After replacing short block and converting to top-feeds she started on the first try today). Link to comment Share on other sites More sharing options...
legspecb08 Posted January 7, 2012 Share Posted January 7, 2012 looks like the motor has been through alot. You get much attention from cops with the red paint? Link to comment Share on other sites More sharing options...
compsurge Posted January 7, 2012 Share Posted January 7, 2012 Considering how they drove it once, I don't think it's been a problem Link to comment Share on other sites More sharing options...
planelazy Posted January 8, 2012 Share Posted January 8, 2012 http://media.screened.com/uploads/0/1084/187940-vlcsnap_2010_05_17_15h07m28s111.png Good Luck Link to comment Share on other sites More sharing options...
frank_ster Posted January 8, 2012 Share Posted January 8, 2012 running yet ? Now that's thinking out of the boxer! fyi all 05 + legacy's have built in code reader Link to comment Share on other sites More sharing options...
jblackwell1 Posted January 8, 2012 Author Share Posted January 8, 2012 wont be running til i get a tune but the motors in and about 90% done. Pics coming. Link to comment Share on other sites More sharing options...
jblackwell1 Posted January 8, 2012 Author Share Posted January 8, 2012 Here are some pictures of final assembly/ installation progress. About 90% done need a tuner and some small odds and ends to wrap up before i turn the key. Cant say thanks to brum enough for all the help. Sounds like i might get to return the favor in the next few weeks tho. http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/042-1.jpg http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/044-1.jpg http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/048-1.jpg http://i36.photobucket.com/albums/e2/jeeped07/Legacy%20GT%20Build/051-1.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.