Jump to content
LegacyGT.com

FS South Jersey-Clearing garage lots of performance parts


Recommended Posts

Located in South Jersey around exit 4 on turnpike. 
 

Lost new motor a few years ago to bad tensioner. Tried to retime, but internals of head were destroyed so gave up. Finally getting around to posting parts and will be adding parts over time to this thread. If you do not see it do not hesitate to ask as I might have it. Large items I likely not ship. 

All prices are OBO, please be reasonable in your offer. Prices do not include 3% paypal fees or shipping. 

Engine parts have approximately 3-4k miles unless otherwise noted

08-09 GT spec wheel with blue stitching $250 

blouch dom 1.5 xtr 10cm housing $1200 current set up for ewg.
 

id1000cc injectors  $250 can ship to ID at buyers expense 

process west intercooler with sti and legacy gt turbo silicone hoses, no hood vent splitter ~ 60k miles $700 

oem coil packs ~60k miles, no misfires when engine was running $25 a piece

Subaru group N motor mounts, slight crack in 1 does not go all the way through  $40 for the set 

New OEM plastic timing cover set $150

new OEM water pump was fitted to block when retimed motor but never ran $100 

new oem tensioner pulley $70

Equal length headers i believe they are toemi $200

Titanium shift knob and titanium reverse lock out $50 for set 

other items that will be posted soon but do not have pics at moments: 

i have 08 qsm specb sitting in driveway so any panels you may need please reach out to see if it is available.

Also have front bumper, side skirts, fenders and rear bumper off 07 dgm specb in storage. 

Extra 6 speed plus driveshaft, rear axles

ssr type f wheels 18x 7.5 

08 specb black on black seats and door panels 

07 specb blue on black seats and door panels 

specb aluminum rear trailing and control arms 

Please DM me for details on any item. Mods let me know if I violated any rules, it has been a while since I have posted.

pending sale:

killer b oil pan, pick up and baffle $600 (pending)

2015 sti steering rack (pending)

6speed swap ~120k miles on drivetrain (pending)

sold items: 38mm tial ewg, grimmspeed ceramic up pipe, Sti pink springs, cusco stablizer bars,  front and rear sway bar, iag aos separator $100

IMG_1331.jpeg

IMG_1332.jpeg

IMG_1333.jpeg

IMG_1334.jpeg

IMG_1335.jpeg

IMG_1336.jpeg

IMG_1337.jpeg

IMG_1338.jpeg

IMG_1339.jpeg

IMG_1340.jpeg

IMG_1341.jpeg

IMG_1342.jpeg

IMG_1343.jpeg

IMG_1344.jpeg

IMG_1345.jpeg

IMG_1346.jpeg

IMG_1347.jpeg

IMG_1348.jpeg

IMG_1350.jpeg

IMG_1351.jpeg

Edited by kanazteck261
  • Thanks 1
Link to comment
Share on other sites

  • kanazteck261 changed the title to FS South Jersey-Clearing garage lots of performance parts

How much for the 2015 sti steering rack and the cusco bars?  (what are the specs on the bars?)

Are the sway bars aftermarket?

Edited by shootz
Link to comment
Share on other sites

Sway bars are the hotchkis set with rear sway bar reinforcement. Paint is chipping but that is very common for the bars.

the cusco bars i do not have part numbers but have attached the pics of what they are. First picture shows Rear bars, they are the two vertical pieces.
 

second picture shows front bar that goes across the control arms. 

IMG_1353.png

IMG_1354.jpeg

Edited by kanazteck261
Link to comment
Share on other sites

Have full 6 speed swap, but currently still on the car as I havent dropped trans out yet. I am not separating components of that. 
 

I do have extra 6 speed with shifter linkage, rear axles, and driveshaft. No extra diff though. 

Link to comment
Share on other sites

11 hours ago, kanazteck261 said:

Have full 6 speed swap, but currently still on the car as I havent dropped trans out yet. I am not separating components of that. 
 

I do have extra 6 speed with shifter linkage, rear axles, and driveshaft. No extra diff though. 

*Eyes closed *Hands on ears* *Murmurs* I don't need it. I don't need it. I do not need it. I. Do. Not. Need. It. 

  • Like 1
  • Haha 3

MILKRUN  - Click Here

Link to comment
Share on other sites

Here are black 08 specb seats and door panels. There is one minor cut in the drivers side door panel and a few indents in the passenger  side door panel I tried to indicate with my finger. 
 

Looking for $1200 picked up. I do not want to ship. 
 

Will try to post pics of blue ones tomorrow as they are still in the car. 

IMG_1393.jpeg

IMG_1392.jpeg

IMG_1391.jpeg

IMG_1390.jpeg

IMG_1389.jpeg

IMG_1386.jpeg

IMG_1385.jpeg

IMG_1383.jpeg

IMG_1382.jpeg

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
On 2/25/2024 at 1:36 PM, kanazteck261 said:

New OEM plastic timing cover set $150

Are you negotiable a little on pricing? I'm looking at all new timing covers just because I'm doing a mild re-build, so why not.

But, I just priced out a complete OE front + rear set from Subaru @ ~$133.xx

 

Happy to buy second hand for a non-moving part where warranty doesn't matter much, but not for equal to or more than local dealer...

Cheers!

 

EDIT: Just so you don't think I am BSing.

image.thumb.png.dfd441a72019de13e6ba7d8fb6ab02fc.png

Edited by KZJonny
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Terms of Use