Max Capacity Posted September 16, 2015 Share Posted September 16, 2015 I'm sure they come up with the fine print that protects them from a miss-print. I think Sears had an issue on something back about 2006. It was a big thread on Honda-Tech. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
whitrzac Posted September 16, 2015 Share Posted September 16, 2015 You guys must not know how this works... Buy now, ask questions later... If it was a price mistake, they would have fixed it yesterday when he posted Link to comment Share on other sites More sharing options...
phiber Posted September 16, 2015 Share Posted September 16, 2015 you can get some used "JDM" mevotechs off ebay for $250. Picture is the exact same thing. here Link to comment Share on other sites More sharing options...
5thElement Posted September 16, 2015 Share Posted September 16, 2015 (edited) This must be a pricing error - the same pn is on a couple of sites for $150 - http://www.jegs.com/i/Mevotech/662/CMS80181/10002/-1 Just in case it is, I put in an order, cant really go wrong for 4 bucks - if the workmanship looks shoddy I will toss them. I have received an estimated ship date notification, email. I am not in need of these yet but since I have seen many threads of the LCA bushing going, I did this for future use... hell don't toss em if they aren't any good recycle the aluminum and get some of the money back. I recycled a stack of my old license plates and got way more than I thought! Edited September 16, 2015 by 5thElement adding to it... Link to comment Share on other sites More sharing options...
5thElement Posted September 16, 2015 Share Posted September 16, 2015 This must be a pricing error - the same pn is on a couple of sites for $150 - http://www.jegs.com/i/Mevotech/662/CMS80181/10002/-1 Just in case it is, I put in an order, cant really go wrong for 4 bucks - if the workmanship looks shoddy I will toss them. Sold out/Sale ended. Let us know! Merc6 I still show the pass side available (11) on CARID.com and 15 of the driver side http://www.carid.com/mevotech/front-right-lower-control-arm-and-ball-joint-assembly-mpn-cms80181.html http://www.carid.com/mevotech/front-left-lower-control-arm-and-ball-joint-assembly-mpn-cms80182.html My apologies if I wasn't supposed to paste the URL! Link to comment Share on other sites More sharing options...
MaasaiWarrior Posted September 16, 2015 Share Posted September 16, 2015 Hahaha, well I went to order them through carid. No problem they have them, it went from $8 usd to $108 with shipping... anyone want to order a set for me? and can ship them up to canada via usps?? Talk about a gross ripoff. Love you long time! 08 Spec B, insta: @08_spec_b, 10 SH Forester insta: @shfozzy Link to comment Share on other sites More sharing options...
Flinkly Posted September 16, 2015 Share Posted September 16, 2015 i wish i could jump on board, but can't use these parts on a stock ride height OBXT... i guess i could buy and re-sell for $200 on CL! "Box of Perrin Silicone Coolant Hoses - $5 for the box!" * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
Harsho1 Posted September 16, 2015 Author Share Posted September 16, 2015 The eBay post in op lists fitments on some Ford transit connect so I think they have a listing error. The part number listed is for LGT lca but their information is for some Ford part that only lists for $5.00. My two arms shipped in one box that ups says weighs about 19 pounds. Link to comment Share on other sites More sharing options...
LatentWagen Posted September 16, 2015 Share Posted September 16, 2015 Just picked up a few more at the CarID site. Think I payed 33 shipped for 3 sets LW's spec. B / YT / IG Link to comment Share on other sites More sharing options...
gimpydingo Posted September 16, 2015 Share Posted September 16, 2015 Well hello thread! Need to fix my overheating before I buy more parts Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted September 16, 2015 Moderators Share Posted September 16, 2015 Just picked up a few more at the CarID site. Think I payed 33 shipped for 3 sets I picked up a few also Estimated ship date received...still waiting for the cancellation! "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
PeterJMC Posted September 16, 2015 Share Posted September 16, 2015 Wow. Maybe I should jump on buying up the inventory Sent from my LG-H811 using Tapatalk Link to comment Share on other sites More sharing options...
whitrzac Posted September 17, 2015 Share Posted September 17, 2015 Inventory shown is not correct. It still hasn't accounted for the ones I bought a few hours ago. Link to comment Share on other sites More sharing options...
magnusonsubie Posted September 17, 2015 Share Posted September 17, 2015 Ordered a set. If they don't look up to par on quality I'll take them into my properties of materials lab and cut them into little pieces and determine their strength. 2005 Vader Wagon Material Tests on Ringland Failure Piston I should have held off and purchased a wagon instead of the spec.B Link to comment Share on other sites More sharing options...
Merc6 Posted September 17, 2015 Share Posted September 17, 2015 (edited) Merc6 I still show the pass side available (11) on CARID.com and 15 of the driver side http://www.carid.com/mevotech/front-right-lower-control-arm-and-ball-joint-assembly-mpn-cms80181.html http://www.carid.com/mevotech/front-left-lower-control-arm-and-ball-joint-assembly-mpn-cms80182.html My apologies if I wasn't supposed to paste the URL! I was clicking on the ebay link, no wonder. This is better than a GB, as many as everyone ordered it might as well have been. Edited September 17, 2015 by Merc6 2005 Satin White Pearl Subaru Legacy 2.5 GT Unlimited 5EAT (Project Car) 2019 Agate Black Ford Explorer XLT 4WD (DD) Link to comment Share on other sites More sharing options...
alex0856 Posted September 17, 2015 Share Posted September 17, 2015 Ordered some too. Then realized I should've ordered several. Oh well. Link to comment Share on other sites More sharing options...
RooTBeeR Posted September 17, 2015 Share Posted September 17, 2015 Interesting...I want to see who gets them first, and what they actually are. Haha "Build" Thread <--Link (OLD) '05 EJ255 now a '13 EJ257 Bottom End w/D25 heads (NEW) Forever Slow [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Merc6 Posted September 17, 2015 Share Posted September 17, 2015 I needed it for the bushings alone so this was win all the way. Just have to hope the bolts come out the old one. 2005 Satin White Pearl Subaru Legacy 2.5 GT Unlimited 5EAT (Project Car) 2019 Agate Black Ford Explorer XLT 4WD (DD) Link to comment Share on other sites More sharing options...
Shawn06SpecB Posted September 17, 2015 Share Posted September 17, 2015 Price just sent to $120/ea Link to comment Share on other sites More sharing options...
LatentWagen Posted September 17, 2015 Share Posted September 17, 2015 And it looks like they've updated their inventory, I'm seeing 1 right and 3 left. LW's spec. B / YT / IG Link to comment Share on other sites More sharing options...
RooTBeeR Posted September 17, 2015 Share Posted September 17, 2015 Price just sent to $120/ea Just grabbed the last two off eBay for $78 shipped Hell of a discount over the now $250+ shipped "Build" Thread <--Link (OLD) '05 EJ255 now a '13 EJ257 Bottom End w/D25 heads (NEW) Forever Slow [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Matt166 Posted September 17, 2015 Share Posted September 17, 2015 Mine shipped, here in 2 days. Link to comment Share on other sites More sharing options...
RooTBeeR Posted September 17, 2015 Share Posted September 17, 2015 I got raped compared to you guys, but still a decent deal. I should have bought this when I saw it earlier. I forgot that my bushings have been torn for a while "Build" Thread <--Link (OLD) '05 EJ255 now a '13 EJ257 Bottom End w/D25 heads (NEW) Forever Slow [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
5thElement Posted September 17, 2015 Share Posted September 17, 2015 I received a "your order has been shipped" confirmation email. my total price $26.53. Scheduled for 9/21. Thanks to OP for letting everyone in on this phenomenal deal! I/we need to save money where ever possible! Gonna post a pic when they arrive...wooo hooo! Link to comment Share on other sites More sharing options...
Redslaya Posted September 17, 2015 Share Posted September 17, 2015 interested to see the quality of the metal used, if its good then we all just got a great deal. if not we all just got some fancy bookends! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now