Survivalism Posted September 10, 2016 Share Posted September 10, 2016 Almost wish I didn't have navigation, hoping I can buy one of these vent pods pretty soon! Link to comment Share on other sites More sharing options...
2000_LegacyOutback Posted October 20, 2016 Share Posted October 20, 2016 Does anybody have the cubby gauge program? I have a 3D printer and i wouldn't mind trying to print one for myself Sent from my SM-G930V using Tapatalk Link to comment Share on other sites More sharing options...
sanchitosonria Posted November 8, 2016 Share Posted November 8, 2016 Any update on a group buy? Link to comment Share on other sites More sharing options...
discojon Posted November 8, 2016 Author Share Posted November 8, 2016 (edited) So, after a short hiatus to focus on other projects, I am back to the forum. The latest news I have is that this sat I am picking up my new (to me) Lathe and Mill. Both are manual control for now with the intention of converting to CNC some time in the future. Once they are up and running I will check back and see what else I can do for the community. Custom turned shift knobs, si drive knobs, and other items are now within my grasp. I would consider myself an amateur machinist on the manual machines but I hope to pick it up quickly. If you have ideas of parts you'd like to see just let me know. Edited November 8, 2016 by discojon Link to comment Share on other sites More sharing options...
I3eXa Posted November 8, 2016 Share Posted November 8, 2016 So, after a short hiatus to focus on other projects, I am back to the forum. The latest news I have is that this sat I am picking up my new (to me) Lathe and Mill. Both are manual control for now with the intention of converting to CNC some time in the future. Once they are up and running I will check back and see what else I can do for the community. Custom turned shift knobs, si drive knobs, and other items are now within my grasp. I would consider myself an amateur machinist on the manual machines but I hope to pick it up quickly. If you have ideas of parts you'd like to see just let me know. glad you're back. We talked a while ago about a hood for the VBG and wondered if you're still able to do something like this. Link to comment Share on other sites More sharing options...
discojon Posted November 8, 2016 Author Share Posted November 8, 2016 glad you're back. We talked a while ago about a hood for the VBG and wondered if you're still able to do something like this. I do recall. I will see what I can come up with. I should have some time in the evenings this week hopefully. Link to comment Share on other sites More sharing options...
2000_LegacyOutback Posted November 9, 2016 Share Posted November 9, 2016 So, after a short hiatus to focus on other projects, I am back to the forum. The latest news I have is that this sat I am picking up my new (to me) Lathe and Mill. Both are manual control for now with the intention of converting to CNC some time in the future. Once they are up and running I will check back and see what else I can do for the community. Custom turned shift knobs, si drive knobs, and other items are now within my grasp. I would consider myself an amateur machinist on the manual machines but I hope to pick it up quickly. If you have ideas of parts you'd like to see just let me know. Holy crap! Congrats man! Those are very nice machines!! Sent from my SM-G930V using Tapatalk Link to comment Share on other sites More sharing options...
honduh Posted November 11, 2016 Share Posted November 11, 2016 I'm new to the thread, how would I go about ordering the dash rattle stoppers? Do I PM the guys from the first page? Link to comment Share on other sites More sharing options...
cryo Posted November 24, 2016 Share Posted November 24, 2016 anyone feel like making/giving these a go that will work for the USDM rear bumper? http://legacygt.com/forums/showthread.php/anyone-know-get-thesei-rear-bumper-light-coversi-257979.html [sIGPIC][/sIGPIC] Providing unmatched customer service and a Premium level of Dyno/E-tuning to the Community cryotuneperformance@yahoo.com facebook.com/cryotuneperformance. Link to comment Share on other sites More sharing options...
NSFW Posted November 24, 2016 Share Posted November 24, 2016 The next update to Windows is supposed to have a 3D scanning/printing app. I'm really curious as to whether it will be useful for scanning convex parts and then making models to fit inside. Or if you can scan the cavity and import that into another app that can flip the faces around, shrink, trim. Voila, a plug is made. Then it's just simple CAD work to add fins or whatever. OK, it won't be that easy, but you get the idea... Link to comment Share on other sites More sharing options...
freaksavior Posted November 24, 2016 Share Posted November 24, 2016 anyone feel like making/giving these a go that will work for the USDM rear bumper? http://legacygt.com/forums/showthread.php/anyone-know-get-thesei-rear-bumper-light-coversi-257979.html There was something like this, but iirc nothing every came of it. http://legacygt.com/forums/showthread.php/would-interested-usdm-08-09-rear-bumper-ventsi-164272.html Most of the goods are on page 14 it looks like. Link to comment Share on other sites More sharing options...
Mega Users seabass07 Posted November 26, 2016 Mega Users Share Posted November 26, 2016 Doubt there will be any useful cad on that update. Maybe a decent slicer though. Shouldn't be too hard to make a model of that part. Looks easy enough to print. Link to comment Share on other sites More sharing options...
arani rey Posted January 11, 2017 Share Posted January 11, 2017 I designed some endcaps for the Subaru Mont Blanc crossbars. The ones that came with my rails just randomly fell off... http://www.thingiverse.com/thing:2029472 Link to comment Share on other sites More sharing options...
tarsman013 Posted January 11, 2017 Share Posted January 11, 2017 anyone feel like making/giving these a go that will work for the USDM rear bumper? http://legacygt.com/forums/showthread.php/anyone-know-get-thesei-rear-bumper-light-coversi-257979.html I will gladly make these! if anyone is in the tampa area that has a LGT sedan that I can scan bring it over to 3D Musketeers in the Wiregrass Mall off of I75 in Wesley Chapel. I may be able to meet you but Scanning is difficult and I am not sure if it will work properly on the panel as scanning cars is extremely difficult. I own a Wagon and dont have these cutouts If you have the JDM part and/or can ship me an original to work with also that would be great. This is a full 3D printing shop founded, and funded, by my brother, myself, and a designer (80w laser cutter comes Thursday!!). We should be ability to 3D scan the area and mock up a piece, if not, we will do it by hand with calipers and paper like our forefathers (or if someone could do some measuring the way they want and just post it here and I can do some mocking up). Additionally any other projects for LGT's yall want to see I have my car...erm wagon throw em my way! Able to design and print just about anything within an 11in cube in plastic. Also have a full color Z corp (now 3D Systems) 650 Pro if you so fancy high end finished pieces. Link to comment Share on other sites More sharing options...
Redslaya Posted January 13, 2017 Share Posted January 13, 2017 Would anyone have the file for the vent gauge pod that could be sent to me? i have a printer and a newly installed pod that needs a home Link to comment Share on other sites More sharing options...
cryo Posted January 14, 2017 Share Posted January 14, 2017 I will gladly make these! if anyone is in the tampa area that has a LGT sedan that I can scan bring it over to 3D Musketeers in the Wiregrass Mall off of I75 in Wesley Chapel. I may be able to meet you but Scanning is difficult and I am not sure if it will work properly on the panel as scanning cars is extremely difficult. I own a Wagon and dont have these cutouts If you have the JDM part and/or can ship me an original to work with also that would be great. This is a full 3D printing shop founded, and funded, by my brother, myself, and a designer (80w laser cutter comes Thursday!!). We should be ability to 3D scan the area and mock up a piece, if not, we will do it by hand with calipers and paper like our forefathers (or if someone could do some measuring the way they want and just post it here and I can do some mocking up). Additionally any other projects for LGT's yall want to see I have my car...erm wagon throw em my way! Able to design and print just about anything within an 11in cube in plastic. Also have a full color Z corp (now 3D Systems) 650 Pro if you so fancy high end finished pieces. Im in colorado but hope someone speaks up in your neighborhood to swing by for measurement. I would live to have a set on ny soec b and have thought about ordering the jdm ones but am not the best at fabrication. If no one speaks up we can post your comment in the other thread that was specific to these covers. Thanks Dave [sIGPIC][/sIGPIC] Providing unmatched customer service and a Premium level of Dyno/E-tuning to the Community cryotuneperformance@yahoo.com facebook.com/cryotuneperformance. Link to comment Share on other sites More sharing options...
TurtleWaffle Posted January 25, 2017 Share Posted January 25, 2017 Has anyone every made an info panel relocation piece? Looks something like this: http://www.avojdm.com/product_info.php?products_id=107 (would rather make one than spend ~$100) I have access to a printer at my school but if someone had the files that would save me some time. If not, I'll probably be making one to go alongside my nexus 7 install (if I ever get my hands on a nav bezel). Link to comment Share on other sites More sharing options...
discojon Posted January 31, 2017 Author Share Posted January 31, 2017 Ok All. I've posted the Cubby gauge pod files to Thingiverse. It's not my original work, but haven't been able to get ahold of the creator for over a year. The files works as is but needs some cleanup after. I haven't the time to clean up the models. http://www.thingiverse.com/thing:2074838 Link to comment Share on other sites More sharing options...
boxkita Posted February 1, 2017 Share Posted February 1, 2017 I will gladly make these! if anyone is in the tampa area that has a LGT sedan that I can scan bring it over to 3D Musketeers in the Wiregrass Mall off of I75 in Wesley Chapel. I may be able to meet you but Scanning is difficult and I am not sure if it will work properly on the panel as scanning cars is extremely difficult. I own a Wagon and dont have these cutouts If you have the JDM part and/or can ship me an original to work with also that would be great. This is a full 3D printing shop founded, and funded, by my brother, myself, and a designer (80w laser cutter comes Thursday!!). We should be ability to 3D scan the area and mock up a piece, if not, we will do it by hand with calipers and paper like our forefathers (or if someone could do some measuring the way they want and just post it here and I can do some mocking up). Additionally any other projects for LGT's yall want to see I have my car...erm wagon throw em my way! Able to design and print just about anything within an 11in cube in plastic. Also have a full color Z corp (now 3D Systems) 650 Pro if you so fancy high end finished pieces. Have you tried scanning any of your wagon? rear bumper, front bumper, front fenders, rear suspension pieces, etc? Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
JSaladino Posted February 2, 2017 Share Posted February 2, 2017 I'm interested in some dash rattle stoppers. Any ideas on how much? Link to comment Share on other sites More sharing options...
tarsman013 Posted February 3, 2017 Share Posted February 3, 2017 Have you tried scanning any of your wagon? rear bumper, front bumper, front fenders, rear suspension pieces, etc? Yes I have and with my scanner it isn't the easiest but it is possible. I have a scan of the hood scoop opening dip in and protrusion. The scanner (structure 3d scanner) does not enjoy shiny surfaces all that much. The old scanner that the shop had (Artec Eva) was significantly better but also ran like 40x the cost so we sold it as the structure was about 90% as good for what it was being used for and ran off of an ipad instead of a gaming computer. Link to comment Share on other sites More sharing options...
2000_LegacyOutback Posted February 9, 2017 Share Posted February 9, 2017 Ok All. I've posted the Cubby gauge pod files to Thingiverse. It's not my original work, but haven't been able to get ahold of the creator for over a year. The files works as is but needs some cleanup after. I haven't the time to clean up the models. http://www.thingiverse.com/thing:2074838 Is this the full 2+ accessport mount pods? Cant tell from the pictures Sent from my SM-G930V using Tapatalk Link to comment Share on other sites More sharing options...
discojon Posted February 10, 2017 Author Share Posted February 10, 2017 I'm going to work on re modeling the pod this weekend in Fusion 360 so I have better creative control of it. Hold tight all and I'll get back to you. Link to comment Share on other sites More sharing options...
discojon Posted February 10, 2017 Author Share Posted February 10, 2017 I went ahead a modeled up the main pod. I need to verify dimensions later. I'll try to come up with a few different configurations now that I can easily modify it. Link to comment Share on other sites More sharing options...
LGTTusch Posted February 10, 2017 Share Posted February 10, 2017 So how many of these files are publicly available? I really do appreciate the people offering to print for members but it seems like not too many files are on thingiverse that i can find... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now