mitskip Posted February 5, 2014 Share Posted February 5, 2014 http://www.baysonr.com/05_07_Subaru_Legacy_JDM_Style_Front_Bumper_Lip_Po_p/flip-pu-legacy05-jdm.htm Sent from my Nexus 5 using Tapatalk Link to comment Share on other sites More sharing options...
JermTheElf Posted February 6, 2014 Share Posted February 6, 2014 If I were to order two shipped to the same location could a price break be worked out? Who would I contact? Link to comment Share on other sites More sharing options...
Markbo Posted February 6, 2014 Share Posted February 6, 2014 Thanks for the link(s). I do like that look better than the brand with the wings on the sides. Much cleaner looking. Link to comment Share on other sites More sharing options...
wpmarky Posted February 6, 2014 Share Posted February 6, 2014 it's a bit confusing cuz they titled it "JDM STYLE LIP", but that one is actually fitted for USDM bumpers. I'll see if they can change it Link to comment Share on other sites More sharing options...
Markbo Posted February 7, 2014 Share Posted February 7, 2014 I'll be darned... I contacted Bayson and their online ordering is out for some reason. Contacted by email for shipping cost and they are willing to sell me the lip for $90 shipped! How can I not order one??? Link to comment Share on other sites More sharing options...
Markbo Posted February 8, 2014 Share Posted February 8, 2014 For those that have got them already, is the hardware good enough or do I need to get something more while waiting on delivery? Link to comment Share on other sites More sharing options...
spartan Posted February 8, 2014 Share Posted February 8, 2014 The screws are fine, I reused my stock plastic clips though after I broke every one they provided. Link to comment Share on other sites More sharing options...
Xyklok Posted February 9, 2014 Share Posted February 9, 2014 Just bought one to replace the WRX one I broke this winter. Hoping for a better fitment because the small gap on the WRX one bugged the hell out of me. Link to comment Share on other sites More sharing options...
Zac88 Posted February 11, 2014 Share Posted February 11, 2014 Bought one off ebay yesterday. Link to comment Share on other sites More sharing options...
famaya26 Posted February 11, 2014 Share Posted February 11, 2014 I want one but also considering getting a JDM front end Link to comment Share on other sites More sharing options...
turboboost Posted February 12, 2014 Share Posted February 12, 2014 Any word on the 08/09 USDM lips? Only JDM available on the Bayson site. Link to comment Share on other sites More sharing options...
dug-e-fresh Posted February 19, 2014 Share Posted February 19, 2014 USDM 08-09 Lip: http://www.baysonr.com/08_09_Subaru_Legacy_V_Limited_Style_Front_Lip_p/flip-pu-legacy08-vspec.htm Link to comment Share on other sites More sharing options...
wpmarky Posted February 19, 2014 Share Posted February 19, 2014 nice! Link to comment Share on other sites More sharing options...
Markbo Posted February 21, 2014 Share Posted February 21, 2014 This is a duplicate to what I posted in Cs front lip thread: I don't have any before pics, but you've seen it I'm sure. http://i116.photobucket.com/albums/o10/Markbo_photos/Auto/V__C861_zps96e46edc.jpg http://i116.photobucket.com/albums/o10/Markbo_photos/Auto/V__5949_zps00210f77.jpg http://i116.photobucket.com/albums/o10/Markbo_photos/Auto/V__420A_zpsa967e994.jpg I was worried it was not right when I got it because the inner package said JDM. A call to Bayson assured me it was right. I also noticed there was only about 8 of the new clips included (of course all the old ones broke while removing them) and thought there was no way it would be afixed well. BUT... there were about 15 or 16 self tapping screws. Those are what holds it on and it is held on very well. Very good material. Not cheap at all. You can see for yourself what it looks like. Over all I am very happy. And it took me and one other guy no more than 15 or 20 minutes to install. Very pleased. Link to comment Share on other sites More sharing options...
subysouth Posted February 22, 2014 Share Posted February 22, 2014 Anyone try to fit the 05-07 Legacy lip to an 05-07 Outback? ss Link to comment Share on other sites More sharing options...
jbean Posted May 5, 2014 Share Posted May 5, 2014 Can anyone confirm that the 08-09 lip BaysonR is selling (linked by dug-e-fresh) works on USDM bumpers with pictures of it installed? I sent them an email ten days ago asking for confirmation of it fitting and a shipping quote and haven't heard back. Either they don't want my money or my message went to their spam folder. USDM 08-09 Lip: http://www.baysonr.com/08_09_Subaru_Legacy_V_Limited_Style_Front_Lip_p/flip-pu-legacy08-vspec.htm Link to comment Share on other sites More sharing options...
12sechatch Posted May 5, 2014 Share Posted May 5, 2014 It says under "vehicle fitment" that it fits USDM bumpers ONLY. Not sure what other confirmation you're looking for. Link to comment Share on other sites More sharing options...
jbean Posted May 5, 2014 Share Posted May 5, 2014 The only pictures in this thread are of the 05-07 lip and I'm pretty sure the pictures on the Bayson R site are of a different bumper than what my USDM Spec B has. I want to be absolutely sure before I pay to have a part shipped from Southern California to Maine. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Markbo Posted May 6, 2014 Share Posted May 6, 2014 Have you called them and asked? Link to comment Share on other sites More sharing options...
jbean Posted May 6, 2014 Share Posted May 6, 2014 I heard back from BaysonR as my message had gone to their junk folder and they confirmed for me that it does indeed fit on an '08 Spec B but that they are out of stock for now. I plan on getting one and when I install it in a few months, I'll post some pictures so this thread will have an example of the '08-'09 lip a member's car. Sure, I could have called them but wanted to check with the community first to see if anyone had purchased and installed one on an '08 or '09. That's why we're here isn't it? Link to comment Share on other sites More sharing options...
chrispyvu Posted May 8, 2014 Share Posted May 8, 2014 Swung by the shop today to let them test fit their 08-09 front lip. fitment is really nice with the middle section being flush against the bumper and the ends also line up pretty well. only had time to snag one quick picture at the shop but ill be able to take a couple more detailed shots if anyone requests Link to comment Share on other sites More sharing options...
Stewy612 Posted May 8, 2014 Share Posted May 8, 2014 I have an 07 spec B with the bason R lip on it and just nailed a truck re-tread yesterday and the lip took it just fine. Popped a few clips out but its back on and cleaned up very nicely! if it does break, its cheap to replace! Link to comment Share on other sites More sharing options...
brawline Posted May 8, 2014 Share Posted May 8, 2014 Swung by the shop today to let them test fit their 08-09 front lip. fitment is really nice with the middle section being flush against the bumper and the ends also line up pretty well. only had time to snag one quick picture at the shop but ill be able to take a couple more detailed shots if anyone requests can you get a side view of your car like of the lip. does it still have a tilt upwards in the front like the oem bumper does? Link to comment Share on other sites More sharing options...
chrispyvu Posted May 10, 2014 Share Posted May 10, 2014 yeah it didnt look like it did at first, but looking closer it does have a bit of an upward tilt. it definitely gives me a little bit of extra clearance getting up my driveway compared to the ebay S204 lip i had before. lemme know if picture is good or ya want another one Link to comment Share on other sites More sharing options...
mk6933 Posted May 10, 2014 Share Posted May 10, 2014 Looks great! Too bad this came out a little too late Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.