GTEASER Posted February 7, 2017 Share Posted February 7, 2017 Maybe I'm just not good at searching... I can't seem to find reference to which polyurethane front sway bar bushing (23mm) fits the 5th generation? I would double check the bolt spacing, but these should work. Energy Suspension 23mm Bushings So none of the model specific fsb bushings, like for WRX, fits the 5th gen? http://www.hardrace.com/VEHICLE_Search.asp?Page=2&Car_Make=19&Car_Model=57&Car_Type=243&MainType=109 GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
cww516 Posted February 23, 2017 Share Posted February 23, 2017 The 2015+ WRX 20mm RSB fits (got one myself), so no upper limit so far. Stock sizes are 23 front, 16 rear. '13-'14 Legacy 2.5i front bars are 26mm, and will drop right in, assuming you have the engine out of the way. Link to comment Share on other sites More sharing options...
foxrider28 Posted April 18, 2017 Share Posted April 18, 2017 I looked up part numbers on the Subaru Electronic Parts catalog and the 15 WRX and 10+ LGT have the same part numbers from the cool side of the turbo to the intake box including the funnel (some people have these made out of carbon fiber for bling factor). Same thing on intercooler feed hose too. Perfect for replacing bellowed plastic tubes with silicone ones. On that note, has anyone attempted using a 15+ wrx intake on a legacy gt? First off this is a sticky for CONFIRMED parts, and not for general guesses. Scroll up to see why I know [emoji13]. To answer your question to my best memory since this hasn't been discussed in some time, yet has been discussed in the forums before multiple times, I'm too lazy to do the search for you. Anyhow, the maf sensors are completely different for the '10-'12 GT and '15+ WRX, therefore a full '15+ intake won't work unless you adapt our maf to fit somehow or go speed density tune and get rid of the maf all together. There are some guys running the Cobb SF intake from '08+ and other similar/custom setups as such. IIRC there's someone that did a maf retro fit as well. But we are pretty much limited to using everything but the maf housing/section. However there's a reason we don't have an aftermarket intake, for a 5th Gen GT to even benefit from one you'd need to be stage 3+. So sure use the silicone/CF lower/mid intake pipes and even add a cone filter and custom box if you'd like but be sure to get a pro tune immediately. 5th Gen OTS maps are all for stock intake setup, they even say to use a stock airfilter. Link to comment Share on other sites More sharing options...
GTEASER Posted April 18, 2017 Share Posted April 18, 2017 (edited) Or these to dress it up without having to get into fabrication and custom tunes. Samco Induction Hose Kit Edited June 9, 2018 by Zee199969 GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
GTEASER Posted May 12, 2017 Share Posted May 12, 2017 (edited) 2015+ WRX and STI steering wheels it 2012-2014 Legacy, confirmed by Hangar, as do DAMD, GTSpec and Prova The only options for 2010-2011 are either GTSpec, DAMD or Prova unless you change out the airbag to the 2012+ style. Edited May 12, 2017 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
DrD123 Posted June 16, 2017 Share Posted June 16, 2017 Does using a WRX steering wheel require rewire for cruise control? Audio controls don't work anyhow so fuckem. The STi steering wheel is a direct swap for the wheel - the wheel frame is the same as the 2012-2014 Legacy. You will need the WRX/STi back panel as the WRX/STi airbag is shorter than the one in the legacy. The switches, trim piece, etc. all swap over perfectly (note - if you don't have a leather steering wheel with the silver trim piece at the bottom of the airbag, you'll need to buy that as well (the trim piece) http://legacygt.com/forums/showthread.php/5th-gen-legacy-interior-mods-203295.html?p=5404237post5404237 questions/discussion really doesn't belong in the sticky thread. Link to comment Share on other sites More sharing options...
Brianha42 Posted June 26, 2017 Share Posted June 26, 2017 (edited) 3.0" TURBO INLET HOSE FOR 2015-2018 WRX SKU: PSP-INT-423BK http://perrinperformance.com/i-20867085-inlet-hose-for-2015-17-wrx.html Edited June 9, 2018 by Zee199969 Link to comment Share on other sites More sharing options...
cww516 Posted July 1, 2017 Share Posted July 1, 2017 So far, I believe any '15+ WRX TMIC will fit (including the PW Verticooler, although the charge pipe needs to be extended). That said, a number of people have seen some very mediocre performance out of the Mishimoto TMIC, with much better numbers from other options, so unless you have an opportunity to get one at a seriously good price, it'd be worth shopping around. Link to comment Share on other sites More sharing options...
Humble Rumble Posted August 5, 2017 Share Posted August 5, 2017 The spoiler from a Legacy Blitzen Rev. A-C (1999-2001) fits our trunk just about perfectly. This also means that pretty much all other 3rd gen sedan spoilers should fit our trunks nicely. This is not mounted, just set on the trunk, drilling would bring the middle more flush. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted August 5, 2017 Share Posted August 5, 2017 Posting this on behalf of user testa422, since this is on his car. Roof spoiler from VA chassis WRX/STI ('15+) fit our car rather nicely. It's slightly less wide than the full window width, but the lines of the spoiler line up with the weatherstripping on our roofs, and the gap left is very small. It's held onto the window with a generous amount of 3M tape. Overall, the look really compliments the car, and it's definitely the most unique roof spoiler I've personally seen on our cars before. Ebay link to buy item: http://www.ebay.com/itm/361909735677 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
DrD123 Posted September 17, 2017 Share Posted September 17, 2017 (edited) The Perrin shift stop for the 2018 WRX works with the 5th Gen LGT with the short shifter and solves the problem of the shifter riding up over the stop. Just installed it in my car. I sort of wish it could get a little closer, but it's much better than before. the one for the 2018 WRX (PSP-INR-019) has a vertical side to the "stop", while the one for the 2014-2017 WRX has an angled side to the "stop" Edited June 9, 2018 by Zee199969 Link to comment Share on other sites More sharing options...
Zee199969 Posted November 17, 2017 Share Posted November 17, 2017 (edited) Subaru OEM STI Group N Front Upper Strut Mounts Subaru Models 2002-2007 WRX / STI PN: B0310FE000_G https://www.amazon.com/dp/B00AN8E208?tag=viglink20901-20 http://legacygt.com/forums/showpost.php?p=5716363&postcount=2545 Thanks FLlegacy Edited November 17, 2017 by Zee199969 My "Build" Link to comment Share on other sites More sharing options...
Zee199969 Posted January 17, 2018 Share Posted January 17, 2018 Mr Gasket 738G Water Outlet Gasket used as the gasket between the turbo compressor outlet and an aftermarket charge pipe https://www.amazon.com/Mr-Gasket-738G-Water-Outlet/dp/B000CMF20O Thanks Sarang! My "Build" Link to comment Share on other sites More sharing options...
GTEASER Posted January 29, 2018 Share Posted January 29, 2018 Plug and Play - OEM 2015-2017 Ford Mustang LED Fog Lights http://legacygt.com/forums/showthread.php/oem-ford-led-fog-lights-267980.html GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Zee199969 Posted May 17, 2019 Share Posted May 17, 2019 (edited) Koyorad VH091662 and STI thermostat 21210AA030 https://legacygt.com/forums/showpost.php?p=5896685&postcount=1254 100% plug and play on both without any modifications Edited May 17, 2019 by Zee199969 My "Build" Link to comment Share on other sites More sharing options...
Recommended Posts