m sprank Posted December 26, 2010 Author Share Posted December 26, 2010 Everything is holding up fine o both cars. Some surface rust on one cars headers and upppe. But nothing some polish wont take off. I have been asked a few times where the vendor I bought from is. i do not know. It was just an eBay find. Everything I got came in boxes that said "M2 Header" IIRC. Seemed that lots of eBay vendors had the same pipes last year. Link to comment Share on other sites More sharing options...
Merc6 Posted December 26, 2010 Share Posted December 26, 2010 Yeah Every time I got a decal from a vendor they no longer have an account when I go back 6 months to a year to replace the one some good samaritan removed trying to scrape the ice off my windows. Same for computer or car parts. 2005 Satin White Pearl Subaru Legacy 2.5 GT Unlimited 5EAT (Project Car) 2019 Agate Black Ford Explorer XLT 4WD (DD) Link to comment Share on other sites More sharing options...
m sprank Posted December 26, 2010 Author Share Posted December 26, 2010 I hear you. I dont see CXLighting selling the XO2 CBE anymore either. Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted December 26, 2010 Share Posted December 26, 2010 ...but this is the problem with buying from Ebay and not reliable vendors!!! Speaking of Ebay vendors: What the HELL is THIS thing anyway? Is it a catback or a girl in a box with a silver bazooka? No one would actually buy this right? http://cgi.ebay.com/ebaymotors/3-2-25-Dual-Cat-Back-05-09-SUBARU-LEGACY-2-5L-_W0QQcmdZViewItemQQhashZitem255f589035QQitemZ160513429557QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Have not found the headers, or anything resembling them. Tons of ELH and ELH or UELH with UP... Here is the UP Pipe but its not such a great deal anymore. Its over $50 now shipped! I think I won the bid on it for $8 or $9 plus $20 shipping. The gaskets it comes with are CRAP so $50 is not a deal. http://cgi.ebay.com/ebaymotors/NEW-M2-Exhaust-Up-Pipe-Uppipe-Subaru-Impreza-WRX-STI-GD-_W0QQcmdZViewItemQQhashZitem1e607efdb2QQitemZ130467954098QQptZRaceQ5fCarQ5fParts Interesting to note that the "new" seller is in the same city as the previous seller but is not under the same ebay seller name. Wonder who they got sued by. Link to comment Share on other sites More sharing options...
Merc6 Posted December 27, 2010 Share Posted December 27, 2010 Best I could find were UEL 2.5 RS <----WTF am I gonna do with those? 2005 Satin White Pearl Subaru Legacy 2.5 GT Unlimited 5EAT (Project Car) 2019 Agate Black Ford Explorer XLT 4WD (DD) Link to comment Share on other sites More sharing options...
Infamous1 Posted December 27, 2010 Share Posted December 27, 2010 Are we forgetting the hack job and mandatory weld to make them fit and seal? Link to comment Share on other sites More sharing options...
m sprank Posted December 27, 2010 Author Share Posted December 27, 2010 The hack job was needed. The fit and seal was Max's motor. Fit mine perfect. I am replacing his motor mounts and pitch stop, tranny mount and more now to correct all the slop in his car. EL headers fit perfect on both my SpecB and my dads 2002 Bugeye (where they live now). Link to comment Share on other sites More sharing options...
Merc6 Posted December 28, 2010 Share Posted December 28, 2010 Didn't forget I just can't get past the EVO exhaust note from the EL setup. When I hear EL I think this. [ame=http://www.youtube.com/watch?v=HHG0B_7OUhs]YouTube - 2006 STI Tomei EL headers, Fujitsubo Exhaust[/ame] and this (to not show rasp as #1 result of the header swap). [ame=http://www.youtube.com/watch?v=FNCIjlBb_pM]YouTube - 2008 STI Greddy SE exhaust w/ APS EL headers[/ame] 2005 Satin White Pearl Subaru Legacy 2.5 GT Unlimited 5EAT (Project Car) 2019 Agate Black Ford Explorer XLT 4WD (DD) Link to comment Share on other sites More sharing options...
m sprank Posted December 28, 2010 Author Share Posted December 28, 2010 It has a lot to do with the CBE. EL headers do change teh sound. But not that drastically. We are still running the OEM CBE on the 02 bug eye. All you notice is the burble gone. Car does not sound like a Honda. Link to comment Share on other sites More sharing options...
B-BGTLimited Posted December 29, 2010 Share Posted December 29, 2010 To add to this, I just got my $41 delivered bell mouth downpipe which is made by M2 Performance as well... I just checked the box after reading this... lol Pics http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6644.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6645.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6650.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6647.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6648.jpg My first impression is not bad for $1 and $40 shipping... lol, But at the same time its not a direct bolt in unless a STI mid section pipe is 3" from the factory. This matches up 100% to the factory downpipe, but from my first check it will not bolt to the midpipe due to it being a 3" outlet. I will be figuring out some way to adapt it and see how it goes, but at the same time I have a set of "FastMotorsports" headers, which I think are also just M2 headers. They are the UEL version, but I think they fixed the issues they had, since these have been installed once before on someone's car so I know they will fit. First things first though, I'm coating all of this with Techline Coatings Turbo X Blue coating. Link to comment Share on other sites More sharing options...
wpmarky Posted December 29, 2010 Share Posted December 29, 2010 http://www.fredbeansparts.com/index.php/3-inch-downpipe-to-2-5-inch-cat-back-exhaust-adaptor-1.html Link to comment Share on other sites More sharing options...
m sprank Posted December 29, 2010 Author Share Posted December 29, 2010 I sell the adapter cheaper. $30 delivered. Link to comment Share on other sites More sharing options...
B-BGTLimited Posted December 29, 2010 Share Posted December 29, 2010 will that adapter work at the mid pipe connection? that joint to my knowledge is not a donut gasket type it's a flange so that won't work for me... at least I'm confused on how it would adapt to it. please let ms know if I'm incorrect. Link to comment Share on other sites More sharing options...
wpmarky Posted December 29, 2010 Share Posted December 29, 2010 The adapter is like a gasket, just keep the black donut piece off (it's removeable) http://www.fredbeansparts.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/a/d/adapter.jpg Link to comment Share on other sites More sharing options...
B-BGTLimited Posted December 29, 2010 Share Posted December 29, 2010 m sprank let me know how to order this. thanks for the clarification wpmarky, I wasn't sure if it could be used like that. EDIT Bolt circle isn't even CLOSE to the same... I have only one stud in my stock downpipe and if I put that in one hole then the other hole on the aftermarket downpipe is about 1/4 wider of a BC... so no way in hell will it line up with the factory flange. Time to send them a message on E-bay about it. Link to comment Share on other sites More sharing options...
m sprank Posted December 29, 2010 Author Share Posted December 29, 2010 I need to et it on my site. I somehow missed putting it up. But, if you just PM me I can get you what you need. I have the adapter and the OEM donut gaskets. Separate and can be purchased separately. Link to comment Share on other sites More sharing options...
Merc6 Posted December 29, 2010 Share Posted December 29, 2010 Still on the look out for UELs and a UP. I might need that gasket kit sans the black donut. My perrin doesn't quite like the stock(modified) mid pipe. PM you Friday when I get paid. 2005 Satin White Pearl Subaru Legacy 2.5 GT Unlimited 5EAT (Project Car) 2019 Agate Black Ford Explorer XLT 4WD (DD) Link to comment Share on other sites More sharing options...
B-BGTLimited Posted December 29, 2010 Share Posted December 29, 2010 Not as cheap anymore, but here is one for 115 shipped to you... Buy it now, and you can also make him an offer for $50 if you see fit. http://cgi.ebay.com/ebaymotors/Exhaust-Manifold-Header-Impreza-WRX-02-03-04-05-06-07-_W0QQcmdZViewItemQQfitsZMakeQ3aSubaruQQhashZitem35aecd37e9QQitemZ230565951465QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Very similar to the ones I have and the ones that FastMotorsports sells... It's just a question on if the width is correct and not like the first set that m sprank had to deal with. Just search ebay for Subaru Header, or Impreza header, they don't list many for a Legacy, but they still fit. If they don't fit, do not modify them, I would say deal directly through e-bay and request replacement/refund, do NOT contact them via e-mail only. That will give you the ability and leverage to file a dispute and get refunded if they do not replace them with a set that fits. Link to comment Share on other sites More sharing options...
timmafod Posted December 29, 2010 Share Posted December 29, 2010 I have an ebay header I bought about a year ago, stainless unequal length with a seperate uppipe, but the up pipe/header flange is 3 bolt. I just searched ebay for a current auction with this style but couldn't find one. They look very similar to the old GTspec headers I had on my old STi in how the pipes are routed and with the 3 bolt flange, just lower quality compared to the gtspec headers (typical chinese ebay headers). I doubt I'll install them now that I have an OEM catless up pipe. If anyone wants to shoot me an offer. Obviously this isn't an official classified ad or else I'd have pics but I figured if someone watching this thread wants a UEL/up pipe combo w/o the junk flex and a 3 bolt up pipe flange for better sealing, supposedly. Link to comment Share on other sites More sharing options...
m sprank Posted December 29, 2010 Author Share Posted December 29, 2010 Not as cheap anymore, but here is one for 115 shipped to you... Buy it now, and you can also make him an offer for $50 if you see fit. http://cgi.ebay.com/ebaymotors/Exhaust-Manifold-Header-Impreza-WRX-02-03-04-05-06-07-_W0QQcmdZViewItemQQfitsZMakeQ3aSubaruQQhashZitem35aecd37e9QQitemZ230565951465QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Very similar to the ones I have and the ones that FastMotorsports sells... It's just a question on if the width is correct and not like the first set that m sprank had to deal with. Just search ebay for Subaru Header, or Impreza header, they don't list many for a Legacy, but they still fit. If they don't fit, do not modify them, I would say deal directly through e-bay and request replacement/refund, do NOT contact them via e-mail only. That will give you the ability and leverage to file a dispute and get refunded if they do not replace them with a set that fits. That pipe looks like the M2 I bought and installed on LALGT's car. Link to comment Share on other sites More sharing options...
B-BGTLimited Posted December 29, 2010 Share Posted December 29, 2010 I know I mentioned it before, but... FastMotorsports headers. http://fast-ms.com/products/FMS-EXT-050.jpg and their up pipes. http://fast-ms.com/products/FMS-EXT-100.jpg This is what I have going on my car, I wouldn't be surprised if it all comes from M2 as well since it all looks the same. If you want the M2 ones then here are those links http://cgi.ebay.com/ebaymotors/M2-Turbo-Manifold-Subaru-Impreza-WRX-STI-GD-2002-2007-_W0QQcmdZViewItemQQhashZitem1e60895cbaQQitemZ130468633786QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories http://cgi.ebay.com/ebaymotors/M2-Up-Pipe-Uppipe-Subaru-Impreza-WRX-STI-GD-2002-2007-_W0QQcmdZViewItemQQhashZitem2a0cdead6cQQitemZ180604546412QQptZRaceQ5fCarQ5fParts Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted December 29, 2010 Share Posted December 29, 2010 That pipe looks like the M2 I bought and installed on LALGT's car. Yup. 99% sure that bottom UP is the same and 90% sure the header is teh same. Ihttp://fast-ms.com/products/FMS-EXT-100.jpg This is what I have going on my car, I wouldn't be surprised if it all comes from M2 as well since it all looks the same. ...the "crease" in the bend and the plug that any oem sensor would bottom out in are pretty indicative... Link to comment Share on other sites More sharing options...
m sprank Posted December 30, 2010 Author Share Posted December 30, 2010 I have no comment other than, I dont/wont sell the stuff. Link to comment Share on other sites More sharing options...
EpicRasta Posted December 30, 2010 Share Posted December 30, 2010 To add to this, I just got my $41 delivered bell mouth downpipe which is made by M2 Performance as well... I just checked the box after reading this... lol Pics http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6644.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6645.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6650.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6647.jpg http://i257.photobucket.com/albums/hh201/3400modified/Leggy/IMG_6648.jpg My first impression is not bad for $1 and $40 shipping... lol, But at the same time its not a direct bolt in unless a STI mid section pipe is 3" from the factory. This matches up 100% to the factory downpipe, but from my first check it will not bolt to the midpipe due to it being a 3" outlet. I will be figuring out some way to adapt it and see how it goes, but at the same time I have a set of "FastMotorsports" headers, which I think are also just M2 headers. They are the UEL version, but I think they fixed the issues they had, since these have been installed once before on someone's car so I know they will fit. First things first though, I'm coating all of this with Techline Coatings Turbo X Blue coating. WAIT...so you're telling me that this downpipe will match up to my LGT perfectly?? Except for the fact that it will require an adapter piece to step down from 3" to 2.5"?? If thats the case, what if i bought the eBay CBE which has a 3" midpipe? I thought for SURE that the pre-2008 WRX downpipes were too short by about 12"?? PLS correct me if i'm wrong....because that saves like $100. Link to comment Share on other sites More sharing options...
B-BGTLimited Posted December 30, 2010 Share Posted December 30, 2010 This is only the shorty part of the downpipe, and the mid pipe in a CBE setup is not the one I have to adapt to... A 08+ WRX FULL LENGTH downpipe will fit a Legacy, search other name brand vendors and a full length to the donut gasket downpipe will fit. Perrin also sells a shorty version with a cat that will fit the legacy, so thats what made me think this should fit, they just left out the fact that they did not taper and setup this flange to bolt to a stock cat pipe. I'm not replacing the second section with the second cat, so I need to adapt this to that part with a 3-2.5" taper, not my mid pipe. I remember it being described as a legacy having a front downpipe, rear downpipe, mid pipe, y pipe, and mufflers... that can be replaced with a full length down pipe, a mid pipe, y pipe and mufflers... With my setup, I'm keeping the factory "rear downpipe" If you do not want to do that, you can buy their 3" "test pipe" section that replaces the second cat... BUT I'm not sure if that will fit... In theory it should, but they also said this would too, but there is no way this is bolting to a stock exhaust. I would have had to buy their second section and then used the Fred Beans Parts 3" to 2.5" CBE adapter, or have a 3" CBE which I do not plan on doing. Here is another downpipe on ebay. http://cgi.ebay.com/ebaymotors/SUBARU-WRX-STI-08-M2-Front-Exhaust-Down-Pipe-08-09-10-_W0QQcmdZViewItemQQhashZitem4cf402b0d6QQitemZ330511331542QQptZRaceQ5fCarQ5fParts and here is their second section to replace the second or third cat, depending on what year legacy you have... (05-06 has 3 07 has 2) http://cgi.ebay.com/ebaymotors/SUBARU-WRX-STI-08-M2-Rear-Exhaust-Down-Test-Pipe-09-10-_W0QQcmdZViewItemQQhashZitem4cf402b0d8QQitemZ330511331544QQptZRaceQ5fCarQ5fParts And don't take my word on this will fit 100% perfect... I'm expecting it to have some flaw somewhere else such as the flanges used wont match up to any aftermarket 3" CBE, but I could be wrong. I bought this downpipe EXPECTING issues on fitment, Hell I was in the process of cutting up a stock gutted shorty to make my own bellmouth... and to be honest, the modification I have to do to make this $40 part fit is WAY easier than coming up with my own bell mouth setup. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.