rapture Posted April 10, 2015 Share Posted April 10, 2015 Yeah mobil 1 was bs When i tried it wayy back when my car was alot closer to stock Id see horrible burnoff/consumption And its overpriced lol Same w royal purp Ive learned to stick w t6 But i am about to try this new platinum penzoil Ill let u guys know how it does Link to comment Share on other sites More sharing options...
mantiis Posted April 10, 2015 Share Posted April 10, 2015 oil change at 5k Rotella T6 0w40 probably something else going on, going to clean out PCV and see if theres any other oil issues. I had a head gasket leak last summer which was probably the beginning of the end. I think it was a little starved during that period before diagnosis. Link to comment Share on other sites More sharing options...
I Donated Too laff79 Posted April 10, 2015 I Donated Too Share Posted April 10, 2015 5k? Too long. Link to comment Share on other sites More sharing options...
rapture Posted April 11, 2015 Share Posted April 11, 2015 Yeah id say 3k oci Link to comment Share on other sites More sharing options...
eldrego Posted April 24, 2015 Share Posted April 24, 2015 How many of you guys are driving down to boxerfest? Link to comment Share on other sites More sharing options...
acumenhokie Posted April 24, 2015 Share Posted April 24, 2015 http://www.pound4pound.com/Photos/Other/2014/8ball_SignsPointToYes.jpg Link to comment Share on other sites More sharing options...
eldrego Posted April 24, 2015 Share Posted April 24, 2015 http://www.pound4pound.com/Photos/Other/2014/8ball_SignsPointToYes.jpg Someone didn't read the question Link to comment Share on other sites More sharing options...
Rester5350 Posted April 24, 2015 Share Posted April 24, 2015 Are any of you guys meeting at the rest stop in DE on 95? Link to comment Share on other sites More sharing options...
acumenhokie Posted April 24, 2015 Share Posted April 24, 2015 Someone didn't read the question Oh yes I did. Unfortunately the signs now point to no since it doesn't look like they're going to be finished rebuilding my tranny tonight (hence I won't be driving to boxerfest). I told them better to take their time than try to rush and get me to Boxerfest. Link to comment Share on other sites More sharing options...
Rester5350 Posted April 24, 2015 Share Posted April 24, 2015 You can hitch a ride in the Bimmer with me if you want? Link to comment Share on other sites More sharing options...
eldrego Posted April 24, 2015 Share Posted April 24, 2015 Oh yes I did. Unfortunately the signs now point to no since it doesn't look like they're going to be finished rebuilding my tranny tonight (hence I won't be driving to boxerfest). I told them better to take their time than try to rush and get me to Boxerfest. "How many?" was the question, last time I checked "yes" is not a number lol You should hitchhike, wear some tight fitting yoga pants and you'll be good Link to comment Share on other sites More sharing options...
acumenhokie Posted April 24, 2015 Share Posted April 24, 2015 Going fishing instead. Link to comment Share on other sites More sharing options...
Mundi78 Posted April 24, 2015 Share Posted April 24, 2015 I will be going tomorrow. 05 LGT. All the way down 95S from NE Philly. Link to comment Share on other sites More sharing options...
grgc5 Posted December 5, 2015 Share Posted December 5, 2015 Just spotted a matte blue and gray outback XT that was lower and on gold wheels driving south on 309. I was in my white Ford Explorer and gave you a wave and then you did a flyby. Car sounded nice. Are you on here? Link to comment Share on other sites More sharing options...
SilverGT06 Posted December 19, 2015 Share Posted December 19, 2015 Anyone know of a decent shop around West / Northwest Philly (Horsham, North Wales, Doylestown) that you would trust to do valves in a 2006 GT? I am pretty sure that I have burnt the exhaust valve on cylinder 4. I have replaced the coil pack, just recently had the fuel rails and injectors converted over to top feed (ID 1000's). I swapped the injectors between 3 and 4 and the engine is still very rough and the trouble code stays with cyl 4 misfire. Link to comment Share on other sites More sharing options...
zangado1 Posted December 19, 2015 Share Posted December 19, 2015 Anyone know of a decent shop around West / Northwest Philly (Horsham, North Wales, Doylestown) that you would trust to do valves in a 2006 GT? I am pretty sure that I have burnt the exhaust valve on cylinder 4. I have replaced the coil pack, just recently had the fuel rails and injectors converted over to top feed (ID 1000's). I swapped the injectors between 3 and 4 and the engine is still very rough and the trouble code stays with cyl 4 misfire. Your in luck...Right in Montgomeryville about a mile in off of 309 there is http://rttuning.com/ These dudes are awesome. service parts whatever. They have people trailering in cars from out of state to get work done. They build motors on site as well. I have been going there for over two years and am impressed with the whole staff. Link to comment Share on other sites More sharing options...
SilverGT06 Posted December 19, 2015 Share Posted December 19, 2015 Your in luck...Right in Montgomeryville about a mile in off of 309 there is http://rttuning.com/ These dudes are awesome. service parts whatever. They have people trailering in cars from out of state to get work done. They build motors on site as well. I have been going there for over two years and am impressed with the whole staff. That works great I didn't know they were over there it turns out there less than 2 miles from my house. Sent from my XT1049 using Tapatalk Link to comment Share on other sites More sharing options...
rapture Posted December 19, 2015 Share Posted December 19, 2015 Uh i had some really bad exp. there Esp with andy Id go elsewhere They rape( overcharge!!!) And honestly what u need is prob not that extensive Check out extreme psi Theyre rite down the st. Also check out rallispec , vince is the man and can build anything ! Link to comment Share on other sites More sharing options...
rapture Posted December 19, 2015 Share Posted December 19, 2015 Aside from the fact if you search i bet theres other machine shops near by that can do what you need way cheaper Jus sayin Link to comment Share on other sites More sharing options...
SilverGT06 Posted December 24, 2015 Share Posted December 24, 2015 Thanks for the suggestions, gonna get it compression tested first and go from there. Sent from my XT1049 using Tapatalk Link to comment Share on other sites More sharing options...
SJGT Posted March 27, 2016 Share Posted March 27, 2016 Revive a dead thread - but anyone in the area have any experience with fender work? Or have a contact? know a good local shop? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
rapture Posted March 27, 2016 Share Posted March 27, 2016 If its that bad id say just buy a new one or look for one off of a wrecked/parted out sale car U got pics? How bad is it? Link to comment Share on other sites More sharing options...
zangado1 Posted March 27, 2016 Share Posted March 27, 2016 Revive a dead thread - but anyone in the area have any experience with fender work? Or have a contact? know a good local shop? Sent from my iPhone using Tapatalk http://pmpautogroup.com/public/ These guys only deal with Subaru. They have a lot of Legacy's there now as well that may meet you're color fender you're looking for. Link to comment Share on other sites More sharing options...
SJGT Posted March 27, 2016 Share Posted March 27, 2016 I meant like rolling/pulling in order to fit certain wheel/tire combos if need be Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
rapture Posted March 27, 2016 Share Posted March 27, 2016 Ooooh Reeaaary Srooo U tryin to go herra frush yro? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.