DadBod Posted March 24, 2021 Share Posted March 24, 2021 Thanks for all of these pictures. It gives a pretty good idea whether it'll fit. The Radium has at least one less hose compared to yours (one for both valve covers, one for the 'PCV-delete' location on intake hose, one for the block, and two small ones for coolant going to the throttle body instead of turbo). Location is about the same. I had to move the main harness a little. I think I will be OK then. It's hard to tell from these pics, but with the IAG kit the main engine harness gets relocated to the AOS bracket (which replaces the harness bracket.) Link to comment Share on other sites More sharing options...
xt2005bonbon Posted March 24, 2021 Share Posted March 24, 2021 Yeah. I also had to replace the harness bracket with the AOS one. However, I think my AOS sits a little further up front than yours. I need to provide a picture.. Link to comment Share on other sites More sharing options...
rebourne Posted March 24, 2021 Share Posted March 24, 2021 Wait, no one wants a used AVO TMIC these days? What about a VDC grimspeed master brace? I have a used AVO TMIC to sell also. Too much to sell, but too many other things more deserving of my time at the moment. pic thread build thread Link to comment Share on other sites More sharing options...
rebourne Posted March 24, 2021 Share Posted March 24, 2021 This is not a for sale post: I took off the Injector Dynamics (Bosch) 1050cc top feed setup off my wagon. Injector Dynamics rails, lines and an STI FPR. Ready to plug in play into a side feed oem setup. pic thread build thread Link to comment Share on other sites More sharing options...
norutah Posted March 24, 2021 Share Posted March 24, 2021 This and that... Lights are coming along and rotors are in route Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
delbon Posted April 7, 2021 Share Posted April 7, 2021 Done cleaning the brakes. Also, I went to my buddy's garage to pick up some 17x7.5" kmc wheels. Will test fit them this weekend. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 7, 2021 Share Posted April 7, 2021 I just spent a bunch of $$$ for a Grimspeed TMIC . Link to comment Share on other sites More sharing options...
Nonamedude Posted April 7, 2021 Share Posted April 7, 2021 Getting ready to put some bc's I got from norutah's part out legacy but having trouble finding a straight answer. Will stock outback wheel size fit on a lowered wagon? Plan to setting them at max legacy ride height. I'm OK with rolling or pulling fenders if that's all that's needed. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 7, 2021 Share Posted April 7, 2021 It should fit. I have a lowered OBXT with stock OB tires. I'll post a picture. Link to comment Share on other sites More sharing options...
Nonamedude Posted April 7, 2021 Share Posted April 7, 2021 It should fit. I have a lowered OBXT with stock OB tires. I'll post a picture. Sweet. If I needed to buy shorter tires that was gonna seriously slow the process. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 7, 2021 Share Posted April 7, 2021 The shocks I have are bilstein HDs. I should have mentioned that I do have some spacers though. I think the rear are 1 or 1.5"? The front are .75 or 1" I believe. Still need to post a pic Link to comment Share on other sites More sharing options...
Nonamedude Posted April 7, 2021 Share Posted April 7, 2021 Considering everything I see is outback wheels absolutely do not fit on an lgt and here's my massive ass 18x9 wheels slammed on coil overs with a fender roll, it's uhhh kinda confusing. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
lilredwagon Posted April 9, 2021 Share Posted April 9, 2021 My stock OBXT wheels fit fine on my OBXT when I had it lowered on Swift wagon springs and JDM LGT Bilsteins. Link to comment Share on other sites More sharing options...
norutah Posted April 9, 2021 Share Posted April 9, 2021 Front 2 piece rotors finally arrived 2 weeks after the rears. Got them installed tonight Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 9, 2021 Share Posted April 9, 2021 The shocks I have are bilstein HDs. I should have mentioned that I do have some spacers though. I think the rear are 1 or 1.5"? The front are .75 or 1" I believe. Still need to post a pic This post shows a couple of pictures. Not very close but I think it helps a bit. https://legacygt.com/forums/showpost.php?p=5990062&postcount=1159 Link to comment Share on other sites More sharing options...
Nonamedude Posted April 9, 2021 Share Posted April 9, 2021 Oh yea. Helps plenty. Also helps because I'd had thoughts of "what if it's too low in the winter?" And I hadn't thought to just slap some spacers in there. Way easier than trying to have a second set of suspension. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 9, 2021 Share Posted April 9, 2021 Yeah, that's right. I actually like that height and the car still handles very well. I still remember going through I-70 in Colorado in the canyons. Man, that was fun! Link to comment Share on other sites More sharing options...
norutah Posted April 10, 2021 Share Posted April 10, 2021 Picked up some legacy wagon roof rails from the dealer and washed both the wagons Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
Nonamedude Posted April 11, 2021 Share Posted April 11, 2021 Nice! I'd though about doing that but hadn't bothered to look if it worked. How hard was it? The generation after you have to drop the airbags to do anything with those big ass rails. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
norutah Posted April 11, 2021 Share Posted April 11, 2021 Nice! I'd though about doing that but hadn't bothered to look if it worked. How hard was it? The generation after you have to drop the airbags to do anything with those big ass rails. Sent from my iPhone using TapatalkIt was easy, took a few hours. A couple of small flat blade screwdrivers, a panel tool, a phillips and a 10mm. I have a used set of legacy rails if you need them. I picked them up for $35 at the wrecking yard. I was going to install them but with fresh paint I opted for new ones. Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
Nonamedude Posted April 11, 2021 Share Posted April 11, 2021 I'll have to wait on doing the change over as I'd need to get new bars for my roof box and that all adds up to a lot of money that could go elsewhere at the moment. If I didn't have the $800 roof box sitting here I'd jump on it. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 12, 2021 Share Posted April 12, 2021 I am surprised the dealers still sell these kind of parts for our gen cars. That's great. norutah, make sure these bikes never fall on your cars! Link to comment Share on other sites More sharing options...
Nonamedude Posted April 12, 2021 Share Posted April 12, 2021 I am surprised the dealers still sell these kind of parts for our gen cars. That's great. norutah, make sure these bikes never fall on your cars! The biggest one I saw while working in bike shops or body shops was people pulling into the garage with the bike on the roof. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
xt2005bonbon Posted April 12, 2021 Share Posted April 12, 2021 I almost did that once! Link to comment Share on other sites More sharing options...
norutah Posted April 12, 2021 Share Posted April 12, 2021 I am surprised the dealers still sell these kind of parts for our gen cars. That's great. norutah, make sure these bikes never fall on your cars! I was surprised too! I really expected them to arrive without the foam seals but it was everything needed. And yeah, I've thought about relocating the bikes Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now