tigger73 Posted September 8, 2015 Share Posted September 8, 2015 I'd be interested to know how people are hanging the exhaust on the passenger side of the car where there is no hangar mount (or so I've been told) Is there a DIY option sans welding? You need to take it to an exhaust shop and get them to weld a couple of hangars to the body of your car. I've done it. It's not a cheap thing to do but the dual exit exhaust really finishes the back of the car nicely Tigger73's MY15 2.5i build Link to comment Share on other sites More sharing options...
andrew_l_s Posted September 8, 2015 Share Posted September 8, 2015 Where did you grab this photo from? I tore apart the console a few days ago and found that the rear AC vent tubing runs down along the right side of the center console making a center mount like shown in the photo impossible. I know they this car in particular doesn't has rear AC vents but I'd like to all least know what country the far is made to see what the CVT version looks like. Sent from my iPhone using Tapatalk Saw this pic on the Aussie site and remembered this discussion from last week so I thought I'd share.http://subaru-com-au-4.s3.amazonaws.com/liberty_2.5i_premium_interiorg.jpg Has the JDM console and rear vents, the ducting must be different for them. Lighting Mods: $10 Footwell Illumination | Tail as Turn | Fog as DRL Diode Dynamics C-Lights | RX350 Bi-Xenon Retrofit Link to comment Share on other sites More sharing options...
CT2015Legacy Posted September 9, 2015 Author Share Posted September 9, 2015 Yeah I guess that the tubes must be put in differently. Many I wonder what they look like. Might have to do some more research to make this happen then. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
tigger73 Posted September 9, 2015 Share Posted September 9, 2015 If I do the LED mod in the cup holder I'll take some photos an post up Tigger73's MY15 2.5i build Link to comment Share on other sites More sharing options...
Subisnob Posted September 9, 2015 Share Posted September 9, 2015 If I do the LED mod in the cup holder I'll take some photos an post up There's a little blue light that shines from above(behind the sunglass holder) that is meant to lightly illuminate cupholders. This is optional for base and I believe standard for Premium trims. Link to comment Share on other sites More sharing options...
jyjellu Posted September 9, 2015 Share Posted September 9, 2015 Badge overlay's, i just ordered a set today http://emblemoverlays.com/t/emblem-overlays Link to comment Share on other sites More sharing options...
CT2015Legacy Posted September 10, 2015 Author Share Posted September 10, 2015 Badge overlay's, i just ordered a set today http://emblemoverlays.com/t/emblem-overlays I'd be very interested to see if they actually fit. A bunch of vendors I spoke to told me the emblems on the legacy were larger than the rest of the lineup. Please do report back once you install if you don't kind. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
CWP 3.6R Posted September 10, 2015 Share Posted September 10, 2015 I'd be very interested to see if they actually fit. A bunch of vendors I spoke to told me the emblems on the legacy were larger than the rest of the lineup. Please do report back once you install if you don't kind. Sent from my iPhone using Tapatalk Yes they will fit. You can see how they look in the pics that I posted on 9/7 in the What did you do to your 6th Gen today thread. The kit comes with Overlays for the front, rear and steering wheel emblems. Link to comment Share on other sites More sharing options...
CT2015Legacy Posted September 15, 2015 Author Share Posted September 15, 2015 (edited) UPDATED: 9/15/2015 Nameless Performance has finally added the 2.5 single axleback to their product listing for the 2015 Legacy. I had added that to the thread. Also added the Prova lowering springs found by Grnlantern. Front Struct Bar from SSD Performance. Badge Overlays. Edited September 15, 2015 by CT2015Legacy Link to comment Share on other sites More sharing options...
jyjellu Posted September 18, 2015 Share Posted September 18, 2015 SSD also has a CAI that say it'll fit 2015-2016 Legacy's just below the strut bar. imo i think it'll look better black then the polished one from Takeda and its cheaper. Link to comment Share on other sites More sharing options...
kayslay21 Posted October 8, 2015 Share Posted October 8, 2015 Don't know if anyone else noticed, but japanparts.com has a bunch of new parts for the Legacy and Outback, you just have to look through all the sections to see what they have... There's an STI strut tower bar, power folding mirrors, a bunch of other stuff but I'm very interested in the display corner sensor they have even though I'm not totally sure what it even is lol here's the link to all sections for the legacy: https://www.japanparts.com/parts/category.php?dl=1&cm=189 Link to comment Share on other sites More sharing options...
jyjellu Posted October 10, 2015 Share Posted October 10, 2015 Don't know if anyone else noticed, but japanparts.com has a bunch of new parts for the Legacy and Outback, you just have to look through all the sections to see what they have... There's an STI strut tower bar, power folding mirrors, a bunch of other stuff but I'm very interested in the display corner sensor they have even though I'm not totally sure what it even is lol here's the link to all sections for the legacy: https://www.japanparts.com/parts/category.php?dl=1&cm=189 i'd really like to learn more about the power folding mirrors, especially for only $39. i doubt that the motors are already installed and no switch is in the US models. Link to comment Share on other sites More sharing options...
CT2015Legacy Posted October 10, 2015 Author Share Posted October 10, 2015 i'd really like to learn more about the power folding mirrors, especially for only $39. i doubt that the motors are already installed and no switch is in the US models. Keep in mind that in Japan they have right hand drive not left so the mirrors are flipped. I'd love the power folding mirrors (should have taken apart the mirrors on my 15' before I traded it in to see if any extra wiring pins were on the harness) as if absolutely love to have power folding mirrors on my car. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
andrew_l_s Posted October 11, 2015 Share Posted October 11, 2015 ^^That $39 needs a 7 in front of it to even be close to the price of them...they're $740.36 to be exact. The switch is $39 so I assume that's where that price came from. All in you're looking at $780 + shipping + wiring needed to install. As much as I'd love this feature I can't justify spending $800 on it. If I had that kind of money laying around I'd be getting winter wheels and tires and Morimoto XB fogs, in other words more practical safety-related upgrades. I'd love to see someone do this though, maybe someday we'll be able to get some used ones for cheaper:rolleyes: Lighting Mods: $10 Footwell Illumination | Tail as Turn | Fog as DRL Diode Dynamics C-Lights | RX350 Bi-Xenon Retrofit Link to comment Share on other sites More sharing options...
CT2015Legacy Posted October 28, 2015 Author Share Posted October 28, 2015 Added some Primitive Products today: Front Skidplate, Transmission Skid Plate and Rear Skidplate (2.5 and for 3.6). Link to comment Share on other sites More sharing options...
subiefan15 Posted November 4, 2015 Share Posted November 4, 2015 CT, can you add a link where you got them? What are they made of? They sound nice, they might even increase your MPG Link to comment Share on other sites More sharing options...
CT2015Legacy Posted November 4, 2015 Author Share Posted November 4, 2015 CT, can you add a link where you got them? What are they made of? They sound nice, they might even increase your MPG Add a link for what specifically? Link to comment Share on other sites More sharing options...
subiefan15 Posted November 5, 2015 Share Posted November 5, 2015 Add a link for what specifically? lol oops, to your skid plates. Sorry for the confusion Link to comment Share on other sites More sharing options...
CT2015Legacy Posted November 6, 2015 Author Share Posted November 6, 2015 lol oops, to your skid plates. Sorry for the confusion No problem. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Bozyczko Posted November 7, 2015 Share Posted November 7, 2015 Does anyone have pictures of the http://www.lamin-x.com/Subaru-Legacy-15-Reverse-Light-Covers-p/s2630.htm installed on their cars and the color they got? Link to comment Share on other sites More sharing options...
ThatSlowLegacy Posted November 7, 2015 Share Posted November 7, 2015 Does anyone have pictures of the http://www.lamin-x.com/Subaru-Legacy-15-Reverse-Light-Covers-p/s2630.htm installed on their cars and the color they got? just use VHT NiteShade Link to comment Share on other sites More sharing options...
noH Posted December 2, 2015 Share Posted December 2, 2015 Has anyone installed the SSD Performance front strut bar? Link to comment Share on other sites More sharing options...
Fred H Posted December 2, 2015 Share Posted December 2, 2015 Yes. It's in the "what did you do ..." thread. Link to comment Share on other sites More sharing options...
Bigkanz Posted December 12, 2015 Share Posted December 12, 2015 Nameless Performance has a catback for the 3.6R now. Here is a link for it. http://shop.namelessperformance.com/catback-2015-legacy-3-6r/ Link to comment Share on other sites More sharing options...
yaboy503 Posted December 19, 2015 Share Posted December 19, 2015 http://images.tapatalk-cdn.com/15/12/19/51322cc3ac78e7c6e4bd6ca628a98897.jpg Came across this on IG ... According to the comments it's on Rs-r springs ? Went to their website and they dont have our model year. I think it looks photoshopped ? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now