discojon Posted October 6, 2014 Author Share Posted October 6, 2014 (edited) This community BADLY needs a 4th gen third brake light delete! Should be SUPER easy to design one. Take some measurements and photos and get them to me. From the rear parcel shelf photos I can see online, It should be easy to make. PM me if you want to help Edited October 6, 2014 by discojon Link to comment Share on other sites More sharing options...
nemo Posted October 6, 2014 Share Posted October 6, 2014 If you don't vote Trump, out, you're a bigot who hates america. Link to comment Share on other sites More sharing options...
Squad51 Posted October 7, 2014 Share Posted October 7, 2014 (edited) Subbed because this is awesome. its pretty strong people are printing ammunition clips for guns using PLA Plus that reminds me can you um,... print some magazines for me? I can provide samples for modeling. Edited October 7, 2014 by Squad51 Link to comment Share on other sites More sharing options...
06silvarubiLGT Posted October 7, 2014 Share Posted October 7, 2014 vent pod is on its way to Kred today or tomorow Link to comment Share on other sites More sharing options...
Code Posted October 7, 2014 Share Posted October 7, 2014 I don't have SI drive on my 06. If you could provide some measurements and a sketch if what you want, I'm sure we can make it happen. Ok. If it is something that you would be willing to work on, I'll see if I can find an assembly for mock-up. "Striving to better, oft we mar what's well." - Bill Shakespeare - car modder Link to comment Share on other sites More sharing options...
.Catalyst. Posted October 7, 2014 Share Posted October 7, 2014 I'd be interested in the 3rd brake light delete for the parcel tray as well, since I'm going with the JDM rear lip that has an integrated 3rd LED brake light. My spec.B [#163] Project Thread with Pictures Get CryoTuned! Link to comment Share on other sites More sharing options...
08Legacy-GT Posted October 8, 2014 Share Posted October 8, 2014 vent pod is on its way to Kred today or tomorow woo 2017 Subaru STI 2008 Subaru Legacy 2.5i limited Link to comment Share on other sites More sharing options...
R0BL3GACY Posted October 8, 2014 Share Posted October 8, 2014 Is it a no go on the bracket for getting rid of the dashboard rattling.. mines getting worse and i'm sure you'd get a lot of interest here, as a lot have mentioned disassembling the whole console just to get rid of it. Link to comment Share on other sites More sharing options...
discojon Posted October 8, 2014 Author Share Posted October 8, 2014 (edited) Is it a no go on the bracket for getting rid of the dashboard rattling.. mines getting worse and i'm sure you'd get a lot of interest here, as a lot have mentioned disassembling the whole console just to get rid of it. I'm going to have to see what all is needed to fix the dash rattle. I'll work on it. We also need a rear reflector for Kred to model for the rear vents if anyone wants to help out Edit. The TSB is ridiculous to fix the rattle. I'm going to try a few things to fixnit a different way Edited October 8, 2014 by discojon Link to comment Share on other sites More sharing options...
discojon Posted October 9, 2014 Author Share Posted October 9, 2014 Couple side projects I got tied up in.... http://tapatalk.imageshack.com/v2/14/10/08/d8906015f90e7ef6e7527aa4f3a093c7.jpg Link to comment Share on other sites More sharing options...
nba0203 Posted October 9, 2014 Share Posted October 9, 2014 is there a way you can make "SLI" bages in the sti font? Link to comment Share on other sites More sharing options...
discojon Posted October 9, 2014 Author Share Posted October 9, 2014 is there a way you can make "SLI" bages in the sti font? As a grill badge or a keychain / emblem? Link to comment Share on other sites More sharing options...
lingling1337 Posted October 9, 2014 Share Posted October 9, 2014 Nice work on the L7 emblems I'll definitely grab a flat one. Link to comment Share on other sites More sharing options...
R0BL3GACY Posted October 9, 2014 Share Posted October 9, 2014 I'm going to have to see what all is needed to fix the dash rattle. I'll work on it. We also need a rear reflector for Kred to model for the rear vents if anyone wants to help out Edit. The TSB is ridiculous to fix the rattle. I'm going to try a few things to fixnit a different way Sounds good, thanks again. I'll be one of the first in line to purchase one once its available. Link to comment Share on other sites More sharing options...
MrTris Posted October 9, 2014 Share Posted October 9, 2014 is there a way you can make "SLI" bages in the sti font? Do you know where you are, son? Link to comment Share on other sites More sharing options...
Squad51 Posted October 9, 2014 Share Posted October 9, 2014 Subbed because this is awesome. Plus that reminds me can you um,... print some magazines for me? I can provide samples for modeling. So does this mean no? I thought for sure there would be someone besides me interested in that... :( Link to comment Share on other sites More sharing options...
compsurge Posted October 10, 2014 Share Posted October 10, 2014 Why would you want to delete the third brake light? To be illegal and a danger on the road. That's as stupid as tinting your brake lights. Link to comment Share on other sites More sharing options...
.Catalyst. Posted October 10, 2014 Share Posted October 10, 2014 To be illegal and a danger on the road. That's as stupid as tinting your brake lights.Easy there... I explained the reason I was interested, and assume that most interested might actually be using a different 3rd brake light on a wing/lip and not want the one in the window any longer. I will be unplugging mine once the new lip is installed with a different LED 3rd brake indicator, but if I could delete it all together it would be cleaner. My spec.B [#163] Project Thread with Pictures Get CryoTuned! Link to comment Share on other sites More sharing options...
compsurge Posted October 10, 2014 Share Posted October 10, 2014 Easy there... I explained the reason I was interested, and assume that most interested might actually be using a different 3rd brake light on a wing/lip and not want the one in the window any longer. I will be unplugging mine once the new lip is installed with a different LED 3rd brake indicator, but if I could delete it all together it would be cleaner. I didn't mean to come off hostile toward you, just toward the "let's hide our tail light trend". I can't stand stupidity when it endangers others on the road. Since you're replacing one with another, you're still following the regulation. Link to comment Share on other sites More sharing options...
MrTris Posted October 10, 2014 Share Posted October 10, 2014 I didn't mean to come off hostile toward you, just toward the "let's hide our tail light trend". I can't stand stupidity when it endangers others on the road. Since you're replacing one with another, you're still following the regulation. And don't forget -- the factory spoilers do have a third brake, but since they were a dealer-installed option (hence, why some came "wingless"), the existing third brake became redundant. I see no reason why there should be another brake light directly behind the one on the wing, factory or otherwise. Link to comment Share on other sites More sharing options...
StormLGT Posted October 10, 2014 Share Posted October 10, 2014 I would be interested in seeing some cool trunk badges. I have wanted one since a week after I took my factory ones off. Preferably one with "2.5GT" or something of the like. Link to comment Share on other sites More sharing options...
compsurge Posted October 11, 2014 Share Posted October 11, 2014 This could be useful for some future developments. Link to comment Share on other sites More sharing options...
discojon Posted October 11, 2014 Author Share Posted October 11, 2014 I would be interested in seeing some cool trunk badges. I have wanted one since a week after I took my factory ones off. Preferably one with "2.5GT" or something of the like. I can work on trunk badges. Link to comment Share on other sites More sharing options...
StkmltS Posted October 11, 2014 Share Posted October 11, 2014 Sub'd My DiySB rebuild Got Misfires? Link to comment Share on other sites More sharing options...
discojon Posted October 11, 2014 Author Share Posted October 11, 2014 Maybe something like this? http://tapatalk.imageshack.com/v2/14/10/11/42973bbcaeb544261edf3e3aff814dfd.jpg With an outline of this... http://tapatalk.imageshack.com/v2/14/10/11/661a8e8d4c27b4cfffbdb0de56fb6da7.jpg Then the badge in black or silver. I'll work it up when I get home Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now