discojon

Emergentprinting.com

Probably not much cheaper. Those are great quality and hand made. I have been tinkering with a single vent gauge pod there. Double would be difficult to print and the quality wouldn't be near as good.

Maybe a drawing would help? Since you mention radiator I'm thinking you are talking about a front mount? Doesn't sound like an application for 3D printing but please give more info.

Exactly what I did, hence this idea

I had not. I'll look more into it when I get home. Thats a pretty slick custom job. The main issue with 3D printing a faceplate is going to be surface finish. I'm not in my car but i feel like there is a slight curvature to the faceplate (convex, left to right). IF this is the case, there is really no way that I can print one and get a good finish. If it's flat / nearly flat, and I can render it flat, then I can get a great finish on my glass bed. I'll look when I get in the car.

Wow. I'll start testing the printed version then, lol.

TurkeyLord, Thought on something like this for adding in a boost gauge. It would be nice to have one tee that would fill the roll of replacement and adding a port for Boost gauge. I'm going to experiment with 3D printing this and see what sort of performance I get out of the part. Not expecting as much as stainless of course.

Sorry that one split. One of the reasons I include 5 in the kits. Hopefully the rattle will be gone for you!

I'm on 3d hubs. https://www.3dhubs.com/charleston/hubs/emergent-printing I'd be glad to do the printing in you get it made.

Yeah rear lower arm. Also pictured are front control arms and rear top link. Pm me if you want the one rear lower.

You mean the long one here right? I have one you can have for the price of shipping. http://tapatalk.imageshack.com/v2/15/03/18/4fef4f472be31c93c9a1e5e68a71a7c5.jpg

Still printing away. 30 of these are going to our upside down friends on the libertygt forums. http://i.imgur.com/TI1VmBj.png

Possibly on the cupholder. Send me some photos of where its broke. The one on my wagon is actually broke also.

First layer of 54 DRS Superbeef kits being printed. http://tapatalk.imageshack.com/v2/15/03/16/01ae06392440c70ee100ec40c091ae2b.jpg

I haven't heard from Kred for a while. Last we talked he was working on finals I think. I'll look into it. It was very close to complete just needs a few tweaks.

No I never got the files.

No it is a replacement vent with a 52mm gauge pod in the center

There was some development and I spoke with the guy that designed it but I was never able to get the files.

I pulled the V1 and V2 from the store and replaced it with this. These take a good effort with pliers to destroy.

20 kits printing now

UPDATE: I have a new MUCH Beefier version of the DRS kit. This one has had every dimension increased and I cannot physically break it with my bare hands. The cold has wreaked havoc on these and I apologize for that. The new kit contains 5 pieces, all 10mm in height. All new kits shipping will be be of this variety and for anyone that has had their kit break I will gladly replace it for the cost of shipping. All you need to do for a replacement is PM me with your name and mailing address and I will look up the order, and send you an invoice for shipping.

Actually I haven't heard from krednfor a while as to the status of the pod. I'm assuming he is busy with school and hasn't had time to work on it much. Maybe he will chime in

3D printed robot poster?

What just happened there?

I haven't tried PET. Now that I have a more capable printer I'm going be giving a wide variety of filaments a try