discojon
Mega Users-
Posts
790 -
Joined
Content Type
Profiles
Forums
Gallery
Everything posted by discojon
-
Are we still recommending Subaru ATF-HP for trans fluid? I'm going to be doing a flush and fill this weekend and want to stock up.
-
Another 5eat to 6mt/5mt swap questions. (05+ LGT) thread
discojon replied to crrider80's topic in Transmissions
Can you confirm that this is doable and complete? I've long considered the conversion but don't want to deal with the Can bus errors and lack of Cruise Control. If doing the swap is possible with no errors, i'm going to start saving again. -
One and 2 were true but the engine was not running. I added the fluid 62k ago and it is still red, not bright, but red. I'm planning on changing it soon. Why an I getting a TCU code for fluid level if there is no sensor / switch. Sorry I don't have the actual code.
-
Where is the fluid level switch on the 5eat? I keep getting codes for the switch. Only happens on freeways and after about a 200 mile continuous drive. Level reports as fine on dipstick. Sent from my SAMSUNG-SM-N910A using Tapatalk
-
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Next time you print one, snap a photo for me before you dissolve the support material. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Could you post the stl here or email it to me.? -
Well it seems as though the 4eat auto shaft will work when doing a 5MT to 6MT swap. Not the 5EAT i was thinking of.
-
I recently replaced my 200k miles oem driveshaft with a dorman unit, (that fits but the ears of the middle universal hit the tunnel under load). I'll be sending it back obviously, but I seem to recall hearing that the 5eat driveshaft was the same length and config as the 2004 ish STI? I'd like to go with a one piece aluminum shaft with serviceable bits. Will the shaft at the link below fit or do i just need to have one custom made? http://www.driveshaftshop.com/import-driveshafts/subaru/sti-2004-2007/subaru-1-piece-aluminum-driveshafts-for-wrx-and-sti-04-07-sti-r180-rear Below are some pics of the Dorman shaft and where it is hitting. http://images.tapatalk-cdn.com/15/12/07/64274f3e05282e447a2522089905cab5.jpg http://images.tapatalk-cdn.com/15/12/07/5cb1e5f8c6b1504d27110e8310f0d1d9.jpg
-
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
$6.95 is a great price for that. Especially from shapeways. -
jdm rain visors!! $144 shipped to your door.
discojon replied to Kalien32's topic in Exterior/Aesthetic
And done. http://images.tapatalk-cdn.com/15/12/02/363b4ab850ba0f37c06cd4a07810b65c.jpg -
jdm rain visors!! $144 shipped to your door.
discojon replied to Kalien32's topic in Exterior/Aesthetic
http://images.tapatalk-cdn.com/15/12/02/372115905b9cbc25c7e7faabd7aa0c69.jpg http://images.tapatalk-cdn.com/15/12/02/77c8f394a041576207da67ab2030d412.jpg Sent from my SAMSUNG-SM-N910A using Tapatalk -
jdm rain visors!! $144 shipped to your door.
discojon replied to Kalien32's topic in Exterior/Aesthetic
-
jdm rain visors!! $144 shipped to your door.
discojon replied to Kalien32's topic in Exterior/Aesthetic
Same thing for me. I placed my order for the wagon visors at 1:05 am EST. Hopefully I'll get a set this time. Still saying 4 available. Sent from my SAMSUNG-SM-N910A using Tapatalk -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
There are some files at devel.lulzbot.com I think I can use. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
To this end, I'd be willing to upgrade my printer to a dual nozzle setup (~$500) if there was demand. That way I could print them in ABS with HIPS as the support material. It would have to be a GB style order. As long as my cut covered materials and the upgrade I'd be game. Actually I'd have to design and build my own based on this. They don't use the new toolheads yet for the dually's https://www.lulzbot.com/store/tool-heads/lulzbot-taz-flexydually-tool-head-v1-0 -
jdm rain visors!! $144 shipped to your door.
discojon replied to Kalien32's topic in Exterior/Aesthetic
I asked about restocking, and they expect more in 2-3 weeks and will send out an email to those that have cancelled orders like myself. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
I have just recently updated my TAZ 5 to Marlin 1.1 RC 2 and installed an Inductive sensor for leveling. Marlin 1.1 has provision for Auto Leveling and Mesh Leveling also Quality of my print won't improve much (already pretty good) but setup time and frustration will decrease! -
jdm rain visors!! $144 shipped to your door.
discojon replied to Kalien32's topic in Exterior/Aesthetic
I ordered a set for the wagon yesterday, said there was one left in stock. Got an email this morning that the order was cancelled due to no stock. Who got my Wagon Visors!!! -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Damn. Sorry to hear SL. Don't give up, find you another! On a lighter note, I have started designing and cutting quad copters now on the CNC. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
I currently have a single nozzle so the part and support both print in the same material. If I add a second extruder, I will use one for a dissolvable support filament and one for the part Sent from my SAMSUNG-SM-N910A using Tapatalk -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Very nice print! Makes me want to upgrade to a dual nozzle setup. I spent 45 min yesterday digging out support material from a print. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Most printers goings rates for 10cm^3 would be about $135-$200 dollars!!! -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Updated the OP. Thanks everyone for what you have done to help. I will begin to update the first several posts with our progress over the next few days. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
Send me a PM. I sell them. -
3D Printing Development Thread
discojon replied to discojon's topic in Fourth Generation Legacy (2005 - 2009)
I don't have a need, no SI Drive. I guess if anyone else needs one I can offer it though.