JmP6889928

Fresh and ready to go Td06 Custom 20G in Midnight Black SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD to Notorious As you see in the photo at $950.00 shipped to your door in CONUS. Brand new Inconel turbine/shaft assembly Brand new center bearing support housing Brand new Custom Forged billet extended tip 6X6 blade compressor wheel-for faster spool and much longer pull past redline. Complete turbine/shaft/compressor wheel dual plane dynamically balanced Upgraded and modified custom journal bearings Upgraded and modified custom thrust plates and bearings Upgraded piston ring oil seals Fully tested and cleaned wastegate actuator Virtually new compressor housing-Midnight Black Oil drain-freshly cleaned. You will have to provide cooling lines and 14mm banjo bolts/copper washers. Light polishing on exhaust housing and compressor housing This turbo is ready to install. The pricing on this is set right at $950.00 shipped and paypal'd to your door in the CONUS. You can check me out on these forums as I have over 300 turbos running worldwide. This is the one if you want to go BIG on AWHP and AWTQ. This is a nipple mount housing which will require a large TMIC or can easily be used with an FMIC too. I know of one I built exactly like it dyno'd at 519 AWHP and a LOT of torque. I have driven the car and it's the fastest street car I've ever driven and I've driven a LOT of extreme cars. This will not be for the faint of heart and will require a lot of other mods including at least 1000cc FI, big Fuel Pump,large IC, and 3 port ECBM, preferably cams, and a serious custom tune preferably on the dyno, but it will pay you back in excellent performance and serious AWHP. As with all my turbos, these come with complete installation instructions and you have access to me at any time via text and phone (at decent hours...LOL). This is ready to be boxed up and can ship immediately to your door in the CONUS. NOTE: If you are in Canada or outside the CONUS, there will be additional shipping and customs/duty fees which will be your responsibility.

Close friend of mine does that exact kind of work. The company he owns makes SS boat railings, grab bars, seat stanchions, exhaust, etc. and he can weld exactly like that. They then buff it out so it looks like it's a single piece without welds. He makes railings for Donzi, Thunderbird, Bayliner, Boston Whaler, SeaRay, ChrisCraft, and about a dozen more companies.

Outstanding! Hits EVERYTHING plus HEAD!

Uhhh....GAK!

Personally, if this was done right and the pillar latched into place when the door was shut, I kind of like this. Again, if done right, it could certainly add some lateral stiffness to the unibody.

LeMons car?

VERY expensive mistake

Gee....everyone called mine a snowplow.....until it was finished and worked great. Nice work. Read the PM I sent. A lot of good information in it.

^^^that rocks!!!

Bavarian Manure Wagon

Do the DeWalt's come with extra batteries too?

Having never owned a handgun before, I recently purchased a Walther PPQ 9MM 5" barrel as my first. I probably tried out 40 different handguns in various flavors and this particular gun fits my hand so perfectly, I don't think I could have designed one myself to make it fit as well. Another great thing is it fits my wife's hand very nicely too-so much so, she says we're going to purchase the exact same gun in 4" barrel for her. I did a lot of reading on it and can't find very much bad about it but again, I'm a newbie to handguns. Comments by you handgun veterans? I know it has a plastic slide rod and I can change it easily enough, but the store where I purchased it has 3 different salespeople that carry the exact same gun as their personal weapon and all 3 said they've put multiple thousands of rounds through them and still have the original plastic slide rod, so I kind of think it might not be necessary to change. Again, comments? Good, bad?

Acura Landmaster https://www.google.com/search?q=The+Landmaster&sxsrf=ALeKk01YNyh1-FF-h44NDpCKatPMufkr5g:1589288784157&tbm=isch&source=iu&ictx=1&fir=jUHhMvyB64t6eM%253A%252CsGbZccRVSHzkPM%252C%252Fm%252F0525s2&vet=1&usg=AI4_-kQNNjZANXJ9msQUaB-Lc78_r6eTqw&sa=X&ved=2ahUKEwjM-rKLsq7pAhW_B50JHT9HDY0Q_B0wEXoECBAQAw#imgrc=jUHhMvyB64t6eM:

Cool paint and some nice wheels and that could be a blast

And as for YOU........snowplow.....shithead....LOL. Love you Pal.

Wow. I am overwhelmed that I've been able to give so much to the absolute best community of car lovers on the entire internet. I read all of your wonderful posts and the kind comments literally make me want to tear up a bit. I will be back building very soon. At the moment, with all of the crap going on in our world, things have been a bit difficult to get my hands on and as soon as some of this blows over, then I'll be back and working again. You are the best community ever and I'm proud to say I call all of you friends, seen and unseen.

Flat earthers have support all over the globe

What do you have for exhaust?

Miatavader

Bugs on tongue AND hits head. Nice combo.

Absolutely Yup! Have done almost that exact type of top out at Seneca Rocks in West Virginia. Not that high but about 350' sheer drop on both sides.

Thanks to csaari for finding these: Is this it? Part number 72651AJ01A, apparently replacing old part number 72651AG00A. https://www.subarupartsforyou.com/oe...03MjY1MUFHMDBB I was actually looking for something else, and came across that. I looked the number up on a couple of different parts sites, and that seems to be the right one. Interesting, I also found it on eBay, but it said it wouldn't fit the 2007 Legacy....

Bugmobile??

Outstanding. That will hold for another 60-80 feet before failing. We don't have vehicle inspection in Michigan but seeing crap like this ALMOST......ALMOST.......makes me wish we did.

Digging on this ^^^^^ More like "GRICE" than RICE