NavyMM06LGT Posted January 18, 2013 Share Posted January 18, 2013 Did a full rebuild, heads and all Link to comment Share on other sites More sharing options...
MooKz Posted January 18, 2013 Share Posted January 18, 2013 ARP Head and Main Studs Manley Connecting Rods (I went with the H beam) ACL main and rod Bearings (Get the standard 52mm though) Nitride Crank CP Pistons 99.5mm/8:2 (More Boost without having to use race gas) I haven't built my heads however. I just have a VF43 on this setup and was going to get a DBB FP Green but I haven't got around to it. Now I'm doing an H6 swap so it kind of defeats the purpose. Link to comment Share on other sites More sharing options...
famaya26 Posted January 18, 2013 Share Posted January 18, 2013 Wow, this is amazing. Link to comment Share on other sites More sharing options...
slim101 Posted January 18, 2013 Share Posted January 18, 2013 I spy a leggy in the backround. Can't wait to see the whole car back togeather!!! Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 18, 2013 Author Share Posted January 18, 2013 The other legacy is my wife's. she won't let me modify hers. Haha Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted January 18, 2013 Share Posted January 18, 2013 *fender/tire envy*(and I kinda wish I'd kept my 3076) Link to comment Share on other sites More sharing options...
Drift Motion Posted January 18, 2013 Share Posted January 18, 2013 i like how you do all the "might as well" stuff....hahahaaa Link to comment Share on other sites More sharing options...
MooKz Posted January 18, 2013 Share Posted January 18, 2013 I did too. I told my girl that I might as well put the better stuff in so that it "lasts longer". Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 18, 2013 Author Share Posted January 18, 2013 I try not to tell the wife everything I buy. Unless its major and unavoidable, like my engine, eventually she will notice that I'm not driving my car. Haha. I will probably redo a lot of my wiring harness on the engine while I am in there and throw some -AN fittings on everything possible. Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 19, 2013 Author Share Posted January 19, 2013 Worked on the car for a bit. Don't have a whole lot I can do without the engine. But worked on the headlights and took some pics. haha. http://i1014.photobucket.com/albums/af265/crazymonk88/IMAG0367.jpg http://i1014.photobucket.com/albums/af265/crazymonk88/IMAG0364.jpg http://i1014.photobucket.com/albums/af265/crazymonk88/IMAG0363.jpg http://i1014.photobucket.com/albums/af265/crazymonk88/IMAG0361.jpg http://i1014.photobucket.com/albums/af265/crazymonk88/IMAG0360.jpg Link to comment Share on other sites More sharing options...
famaya26 Posted January 19, 2013 Share Posted January 19, 2013 Link to comment Share on other sites More sharing options...
Arielgt93 Posted January 19, 2013 Share Posted January 19, 2013 I swear I love this thread and seeing this car more and more! Keep up the work hopefully it comes out great! I was also thinking of a rebuild Of my motor. By the way how'd you get your tail lights like that I want mine to look like that. Is it tint, laminex? Sorry noob question. Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 19, 2013 Author Share Posted January 19, 2013 The tail lights are stock. If you are referring to the head lights this link is for a wrx but the separating and painting of the headlights is the same. http://forums.nasioc.com/forums/showthread.php?t=957478 Link to comment Share on other sites More sharing options...
MooKz Posted January 19, 2013 Share Posted January 19, 2013 All looks pure tits, but that gap in the rear fender needs filled. Space it out so it's flush. Love the headlights. Now I want to paint that strip over the signal housing next time I take them apart. Link to comment Share on other sites More sharing options...
TurboLag23 Posted January 19, 2013 Share Posted January 19, 2013 H6 turbo swap. I'm looking for a bare minimum of 500whp on pump gas. ... Build thread please!!!!! Link to comment Share on other sites More sharing options...
MooKz Posted January 19, 2013 Share Posted January 19, 2013 I'll have a thread up when the time comes. Things are tight right now since I'm preparing for the move to Florida. Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 19, 2013 Author Share Posted January 19, 2013 All looks pure tits, but that gap in the rear fender needs filled. Space it out so it's flush. Love the headlights. Now I want to paint that strip over the signal housing next time I take them apart. That gap will be filled when I go to get an alignment done. The rear camber is a little off right now. If I have to ill run a spacer in the back. Link to comment Share on other sites More sharing options...
MooKz Posted January 19, 2013 Share Posted January 19, 2013 Hellaflush son. Link to comment Share on other sites More sharing options...
Stevedorez Posted January 19, 2013 Share Posted January 19, 2013 best project regarding legacy I ever seen Link to comment Share on other sites More sharing options...
xt2005bonbon Posted January 19, 2013 Share Posted January 19, 2013 Cool project! But if all engine parts are fine, why did the engine sound so awful on your video? Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 19, 2013 Author Share Posted January 19, 2013 Cool project! But if all engine parts are fine, why did the engine sound so awful on your video? Honestly no idea. My tuner had no idea either. The only thing I can think of is the idler tensioner was bad. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted January 19, 2013 Share Posted January 19, 2013 Honestly no idea. My tuner had no idea either. The only thing I can think of is the idler tensioner was bad. Did you have a look at it? Was it leaking some fluid? Mine sheared off while I was driving . Link to comment Share on other sites More sharing options...
E-Wrek Posted January 19, 2013 Share Posted January 19, 2013 Dope man Link to comment Share on other sites More sharing options...
crazymonk8-8 Posted January 20, 2013 Author Share Posted January 20, 2013 Did you have a look at it? Was it leaking some fluid? Mine sheared off while I was driving . No it wasn't leaking but when you pushed on it, it wouldn't extend anymore. Like it was maxed out or something Link to comment Share on other sites More sharing options...
JJr Posted January 20, 2013 Share Posted January 20, 2013 Great build thread, love the car, keep the post's coming! I'm assuming it's the water and alot more. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.