RedDawg Posted April 15, 2014 Share Posted April 15, 2014 What do you need the actual flange for, if you don't mind me asking. I put together an ebay DIY TMIC kit last year, and I couldn't find a proper flange last year for it so I welded a pipe onto a stock piece of metal, then just rounded the edges off and drilled the bolt holes. I'd like to clean it up a bit this spring with a proper flange. And maybe i'm calling it by the wrong name but i'm looking for a piece that's what's circled in this pic: http://i39.tinypic.com/2agohs0.jpg Link to comment Share on other sites More sharing options...
xero287 Posted April 15, 2014 Share Posted April 15, 2014 Then you should have specified that you have a fmic not tmic Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted April 15, 2014 I Donated Share Posted April 15, 2014 Then you should have specified that you have a fmic not tmic Looks like he has a TMIC: I put together an ebay DIY TMIC kit last year Link to comment Share on other sites More sharing options...
compsurge Posted April 15, 2014 Share Posted April 15, 2014 Car be doing wheelies all the time. Keeps the front on the top. Link to comment Share on other sites More sharing options...
RedDawg Posted April 15, 2014 Share Posted April 15, 2014 Then you should have specified that you have a fmic not tmic Link to comment Share on other sites More sharing options...
RedDawg Posted April 15, 2014 Share Posted April 15, 2014 Looks like he has a TMIC: correct Link to comment Share on other sites More sharing options...
GEE-OTTO Posted April 16, 2014 Share Posted April 16, 2014 I put together an ebay DIY TMIC kit last year, and I couldn't find a proper flange last year for it so I welded a pipe onto a stock piece of metal, then just rounded the edges off and drilled the bolt holes. I'd like to clean it up a bit this spring with a proper flange. And maybe i'm calling it by the wrong name but i'm looking for a piece that's what's circled in this pic: http://i39.tinypic.com/2agohs0.jpg Your homemade flange isn't terrible but I would rotate the stub and eliminate that first bend for a more direct path. Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted April 16, 2014 I Donated Share Posted April 16, 2014 Your homemade flange isn't terrible but I would rotate the stub and eliminate that first bend for a more direct path. That picture is of the piping for the RacerX FMIC. He was just using it for reference as to which flange he needs. Link to comment Share on other sites More sharing options...
chimaira4deth Posted April 16, 2014 Share Posted April 16, 2014 Someone trade me there wingless trunk. OBP Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 17, 2014 Moderators Share Posted April 17, 2014 No affiliation, but this is crazy cheap if anyone is looking for a downpipe: http://washingtondc.craigslist.org/doc/pts/4424652562.html $100 for an invidia catless "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
compsurge Posted April 17, 2014 Share Posted April 17, 2014 That plus this... Link to comment Share on other sites More sharing options...
maddoc Posted April 18, 2014 Share Posted April 18, 2014 Have a few items still left over from my 05 LGT. Would love to sell some of this locally. WickedCAS 10" passenger side trunk subwoofer box for 05-09 Legacy Sedan. Never used. In excellent shape. Prefer local pick up. Approximately .75 Cu. Ft. - $325 PIAA Wipers, brand new correct sizes for the Legacy - $40 OEM Single DIN for cubby pod - Seen here on AVO JDM - $75 Thread and pics: http://legacygt.com/forums/showthread.php/fs-md-wickedcas-magic-box-10-subbox-new-piaa-wipers-220018.html JDM B4 Door Sills - Excellent condition - $120 Thread and pics: http://legacygt.com/forums/showthread.php/md-05-07-jdm-bl-taillights-bnib-trf-diffuser-oem-219189.html JDM Spec B half bumper lip (some scuffs, some paint cracks) - $350 OBO Thread and pics: http://legacygt.com/forums/showthread.php/md-jdm-spec-b-front-bumper-fogs-etc-jdm-half-216728.html Not even offers on this stuff I'm sad. Link to comment Share on other sites More sharing options...
SBT Posted April 18, 2014 Share Posted April 18, 2014 BMB & TFH. My first thought was $100 for a "catted" Invidia DP, likely a good price. Then saw that it was an uncatted track pipe, and the $100.00 seemed about right. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
compsurge Posted April 19, 2014 Share Posted April 19, 2014 $100 is a great deal for a used Invidia. I also found out about the Grimmspeed catted downpipe after posting the above. It has a 49-state legal catalytic converter and is priced to move. I'll be picking one up when I can get one (Mike said they sold way more than they anticipated and have 4-6 weeks of welding on the group buy). Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 19, 2014 Moderators Share Posted April 19, 2014 BMB & TFH. My first thought was $100 for a "catted" Invidia DP, likely a good price. Then saw that it was an uncatted track pipe, and the $100.00 seemed about right. Not sure that I've every seen an invidia downpipe that low. Agree to disagree that $100 is a screaming deal. Granted, I don't really value a catless pipe at all, so it doesn't really matter! "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 19, 2014 Moderators Share Posted April 19, 2014 Before I throw it out, does anyone local have any desire for a broken spec.b driveshaft? If not, it's going out in the trash tomorrow night. It's literally in two pieces right now. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
compsurge Posted April 19, 2014 Share Posted April 19, 2014 Is it broken at the carrier bearing? Just curious. If I was making some form of plastic injection molding machine, I might be interested (read: not interested). As of right now, I am at least a year from that project Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 19, 2014 Moderators Share Posted April 19, 2014 Yeah, it came apart at the joint there. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
SBT Posted April 20, 2014 Share Posted April 20, 2014 Looking for 18x8, 18x8.5 +50 to +45 wheels. Prefer forged, but let me know what you've got. WTB Thread here - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 21, 2014 Moderators Share Posted April 21, 2014 Selling a gutted stock downpipe w/ wideband bung installed: http://legacygt.com/forums/showthread.php/fs-va-catless-stock-downpipe-w-wideband-bung-224229.html?p=4798235#post4798235 "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 24, 2014 Moderators Share Posted April 24, 2014 If anyone in the Philly area is interested in a set of gold BBS wheels, hit me up--I'll be in the Philly area briefly on Saturday morning and could bring them with me Will also consider parting out the set and selling individually. http://legacygt.com/forums/showthread.php/fs-va-gold-bbs-5x100-without-tires-223841.html "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
TRBO SUB Posted April 25, 2014 Share Posted April 25, 2014 Anyone have a bead on a complete set of black leather wagon seats? Trade preferred but I'm getting desperate! Link to comment Share on other sites More sharing options...
TRBO SUB Posted April 25, 2014 Share Posted April 25, 2014 Probably should mention I have heated cloth for trade. Both heater cores in the seats are functional and all seats show little to zero signs of wear. Link to comment Share on other sites More sharing options...
jeffy2.5xt Posted April 25, 2014 Share Posted April 25, 2014 what color? that might help too. Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted April 25, 2014 I Donated Share Posted April 25, 2014 what color? that might help too. LGT cloth seats were all black/dark gray. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now