scoobydoobie Posted July 21, 2010 Share Posted July 21, 2010 Did you end up swapping out your hangers? If so, how'd it work out? I installed mine last night (in less than ideal conditions) and I think it looks pretty good. I'll post up some pictures here in a second when my computer stops having a break.... Nope not yet. Been pretty busy and haven't swapped them out yet. Look forward to your pics. Link to comment Share on other sites More sharing options...
jcdennis Posted July 21, 2010 Share Posted July 21, 2010 Okay.... I hope this works. In any case, in person it looks pretty good I must say. It almost seems from these pics that it's not lined up, but while they're not 100% centered they are spaced the same. I'm thinking I might try something along the lines of kartboy for hangers as they're supposed to be the stock lenght.... Thoughts? Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 21, 2010 Share Posted July 21, 2010 hang a little lower than I'd like but at least they look pretty much even w/the stock hangers. I might try a mix and match of Rallitek and stock hangers to see if I can't get them to sit even, but also a bit lower. As it is right now, the right tip on mine rattles and knocks against black part on the bumper (over bumps or when idling high with the AC on). Link to comment Share on other sites More sharing options...
Irimis Posted July 21, 2010 Share Posted July 21, 2010 Yea like scooby said, if you mix and match the hangers you prob will get the fit you want. Mine look like yours Dennis. I have not tried this but when looking at the hangers the inside one is being pulled to the outside as far as it can go. So giving it a longer hanger to let it move might do the trick and put it more center. I dont mind the look so I have not done it. Link to comment Share on other sites More sharing options...
jcdennis Posted July 21, 2010 Share Posted July 21, 2010 Hmm. So maybe three rallitek (on the y pipe and the outsides of the cans) and two either stock or some longer hangers on the inside of the cans might be ideal. I bet you could give us a pretty good idea Scoobydoobie..... Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 21, 2010 Share Posted July 21, 2010 Hmm. So maybe three rallitek (on the y pipe and the outsides of the cans) and two either stock or some longer hangers on the inside of the cans might be ideal. I bet you could give us a pretty good idea Scoobydoobie..... I might mess with it this weekend and see what I can do. Will post some pics of the outcome. Link to comment Share on other sites More sharing options...
Rushin Posted August 1, 2010 Share Posted August 1, 2010 Thats it! Got the last one. Mike still has some y-pipes and midpipes i guess. here is a video of mine. The fitment is amazing. Perfectly spot on. Love the sound its amazing plain and simple. [ame=http://www.youtube.com/watch?v=DVt_d7pJrAw&hd=1]YouTube- Subaru Legacy Spec.b. Bosal Catback exhaust[/ame] Link to comment Share on other sites More sharing options...
adpsmp Posted August 1, 2010 Share Posted August 1, 2010 Looks and sounds just like mine.... LOVE IT!!! Fitment looks perfect. Did you use factory hangers or aftermarket? Link to comment Share on other sites More sharing options...
Rushin Posted August 2, 2010 Share Posted August 2, 2010 I used aftermarket ones. Don't remember who makes them tho. Link to comment Share on other sites More sharing options...
Al Thomson Posted August 2, 2010 Share Posted August 2, 2010 Rushin, they look liek they are a red color, perhaps Kartboy http://www2.kartboy.com/x4/product.php?productid=16167&cat=270&page=1 Link to comment Share on other sites More sharing options...
Rushin Posted August 4, 2010 Share Posted August 4, 2010 Yeah they are kart boy i am pretty sure. here is another pic. I absolutely love this exhaust. http://i863.photobucket.com/albums/ab200/ttarlov/ff1a949b.jpg Link to comment Share on other sites More sharing options...
fuggers Posted August 4, 2010 Share Posted August 4, 2010 Wish I would have spotted this thread sooner, damn it Link to comment Share on other sites More sharing options...
Al Thomson Posted August 5, 2010 Share Posted August 5, 2010 I didn't recall reading anywhere of anyone having difficulty doing up teh bolts that connect the doen pipe to the mid pipe. Did you get replacement bolts for that to allow for teh thicker flange on the mid pipe? Also, which way have people got the inside hanger bushings, pointing up or down? Still trying to get happy with the muffler position. Link to comment Share on other sites More sharing options...
drkknight99 Posted October 1, 2010 Share Posted October 1, 2010 anyone wanting a mid, y-pipe combo, jump quick, supposedly going into the trash soon. Link to comment Share on other sites More sharing options...
greg_mitch Posted October 1, 2010 Share Posted October 1, 2010 anyone wanting a mid, y-pipe combo, jump quick, supposedly going into the trash soon. Do any other mufflers bolt up to the y-pipe locations? Link to comment Share on other sites More sharing options...
drkknight99 Posted October 2, 2010 Share Posted October 2, 2010 mike stated that you would have to go to a muffler shop.... im assuming anything else other than the stock axel backs will work. Not sure about how much, now that they are going ot the scrap heap. Link to comment Share on other sites More sharing options...
GEE-OTTO Posted February 4, 2011 Share Posted February 4, 2011 Oh how I wish I could buy this exhaust dammit I want it very badly I'm sure one of you guys didn't like this exhaust Link to comment Share on other sites More sharing options...
kirbwrx Posted February 5, 2011 Share Posted February 5, 2011 I might have one for sale soon. If I don't sell it, its going on the wife's wagon. Sent from my Droid using Tapatalk Link to comment Share on other sites More sharing options...
GEE-OTTO Posted February 5, 2011 Share Posted February 5, 2011 BOOOOO BOSAL all there exhaust BLOW!! I now because when they first came out the only piece was for eclipes none turbo my friend dad had it put on his car because he said he wanted to here it but it sounded like a fart can...... Oh yea by the way the eighteen wheelers and they only had to go to philly too!!!! Lay off the drugs and I'm sure it sounded like shit on an eclipse, it's an N/A Esclipse with a Chrysler in line 4 cylinder what would you expect?? Link to comment Share on other sites More sharing options...
goneskiian Posted February 6, 2011 Share Posted February 6, 2011 I see jvento deleted his post. Thank goodness. Did he finally get banned? Link to comment Share on other sites More sharing options...
jvento Posted February 12, 2011 Share Posted February 12, 2011 I just don't understand why I would delete my post.. So your saying that I got banned NO.. No and I'm not doing DRUGS Link to comment Share on other sites More sharing options...
GotTurboWut Posted February 12, 2011 Share Posted February 12, 2011 you don't want an exhaust on the 2.5 non turbo...I'll take it instead! Link to comment Share on other sites More sharing options...
goneskiian Posted February 12, 2011 Share Posted February 12, 2011 I just don't understand why I would delete my post.. So your saying that I got banned NO.. No and I'm not doing DRUGS Where'd it go then? I didn't say you got banned. I was HOPING you got banned. You contribute nothing but complaints to the threads I've seen you post in. Link to comment Share on other sites More sharing options...
jvento Posted February 12, 2011 Share Posted February 12, 2011 Dude grow-up people can have there opinion... Link to comment Share on other sites More sharing options...
goneskiian Posted February 12, 2011 Share Posted February 12, 2011 Dude grow-up people can have there opinion... Yes they can. OK, I'll ignore your posts from now on. Have a nice day. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.