tjbev21 Posted July 7, 2010 Share Posted July 7, 2010 I put a 20mm whiteline bar on the OP's 09 LGT with the bosal and it fit perfect I don't see why a 21mm wouldn't.... IMO Link to comment Share on other sites More sharing options...
ktm200 Posted July 8, 2010 Share Posted July 8, 2010 Does this cat back system work with a 2.5i by any chance? It sounds great and for a great price. I'm not familiar with the differences b/w the GTs and the N/As cat back exhausts. Link to comment Share on other sites More sharing options...
thestratomaster Posted July 8, 2010 Share Posted July 8, 2010 ^^should work Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 9, 2010 Share Posted July 9, 2010 Does this cat back system work with a 2.5i by any chance? It sounds great and for a great price. I'm not familiar with the differences b/w the GTs and the N/As cat back exhausts. Even if it does, I'd be hesitant of putting a 3" exhaust on an n/a. Link to comment Share on other sites More sharing options...
Zekes05GT Posted July 11, 2010 Share Posted July 11, 2010 Got mine about a week ago...showed up very poorly packed (pieces flopping around in a heavily damaged box). Mufflers were wrapped in bubble wrap and a piece of cardboard, but one of them had a few dings. Disappointing, but I guess you get what you pay for when you are only charged $22 to ship an entire exhaust system). Otherwise, the exhaust fit well. Have to wait another week for the car back after a municipal bus tagged me. Looking forward to trying it out... Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 12, 2010 Share Posted July 12, 2010 Got mine about a week ago...showed up very poorly packed (pieces flopping around in a heavily damaged box). Mufflers were wrapped in bubble wrap and a piece of cardboard, but one of them had a few dings. Disappointing, but I guess you get what you pay for when you are only charged $22 to ship an entire exhaust system). Otherwise, the exhaust fit well. Have to wait another week for the car back after a municipal bus tagged me. Looking forward to trying it out... I assume by your name that you have an 05 LGT. Did you re-use the stock exhaust hangers? How do the tips look in the cutouts? Even? Link to comment Share on other sites More sharing options...
shopper Posted July 14, 2010 Share Posted July 14, 2010 putting mine on friday Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 14, 2010 Share Posted July 14, 2010 putting mine on friday on what year car? if its an 05-07 can you take some installed pics? Link to comment Share on other sites More sharing options...
Quiethom Posted July 14, 2010 Share Posted July 14, 2010 Mine just shipped for $427.96 to Norcal Link to comment Share on other sites More sharing options...
dolefee Posted July 14, 2010 Share Posted July 14, 2010 Per Mike, only 1 complete CBE left! Link to comment Share on other sites More sharing options...
jcdennis Posted July 15, 2010 Share Posted July 15, 2010 Per Mike, only 1 complete CBE left! I just got off the phone with him. He actually found a few more - but not a lot - like three units left after mine ships.... Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 15, 2010 Share Posted July 15, 2010 Can someone else with an 05-07 please post some installed pics? Trying to see if anyone else is having the fitment issues I had (uneven tips, exhaust hitting undercarriage over bumps) Link to comment Share on other sites More sharing options...
jcdennis Posted July 15, 2010 Share Posted July 15, 2010 Can someone else with an 05-07 please post some installed pics? Trying to see if anyone else is having the fitment issues I had (uneven tips, exhaust hitting undercarriage over bumps) Looks like I'll have mine early next week. I'll take some pics when I get it on. What RSB do you have? Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 15, 2010 Share Posted July 15, 2010 Looks like I'll have mine early next week. I'll take some pics when I get it on. What RSB do you have? That would be great. I have the Rallitek 19mm RSB which leaves about an inch of clearance on the driver's side between the exhaust and the RSB. (pics on previous page or 2) Link to comment Share on other sites More sharing options...
Vitamin_G Posted July 16, 2010 Share Posted July 16, 2010 Not sure if its possible but did you mount the center pipe upside down? Mine fit perfectly with no hassle. Link to comment Share on other sites More sharing options...
Chubien Posted July 16, 2010 Share Posted July 16, 2010 Had mine installed for approx 2-3 Months and notice that it has gotten much louder anyone else notice this? Link to comment Share on other sites More sharing options...
shopper Posted July 16, 2010 Share Posted July 16, 2010 mine goes on tomarrow with my spt intake and TA tune scooby its a 05 will try to get some pictures Link to comment Share on other sites More sharing options...
Deadleave Posted July 16, 2010 Share Posted July 16, 2010 I picked them up local yesterday, and had them installed. Direct fit to ERZ catted DP, and fitment is stock. Little louder than stock, low grumble..... After CBE, car is backfiring so I need a tune But its very nice unit, and most of all, it fits very nicely Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 16, 2010 Share Posted July 16, 2010 Not sure if its possible but did you mount the center pipe upside down? Mine fit perfectly with no hassle. Nope, don't think its possible to install with it upside down. Yours is also an 08+, which everyone has reported perfect fitment, especially with the rallitek hangers. This is why I'm asking about people with 05-07 rear bumpers. shopper-that would be great, thanks. Are you re-using the stock exhaust hangers? Link to comment Share on other sites More sharing options...
Irimis Posted July 16, 2010 Share Posted July 16, 2010 Deadleave has an 05 and says fits nicely. Dead you have any pics? Link to comment Share on other sites More sharing options...
Deadleave Posted July 16, 2010 Share Posted July 16, 2010 Deadleave has an 05 and says fits nicely. Dead you have any pics? Sorry, no.....it was spur of the moment buy, when I found this post. I could tell you I have no clearance issues.... I am on coilover/ whiteline 20mm rear, on kartboy ends. And nothing hits, and all on stock hangers. Link to comment Share on other sites More sharing options...
Zekes05GT Posted July 17, 2010 Share Posted July 17, 2010 I assume by your name that you have an 05 LGT. Did you re-use the stock exhaust hangers? How do the tips look in the cutouts? Even? I reused the stock hangers, and the fitment was dead on. Tips are straight, but admittedly they arent my favorite exhaust tips- but i couldnt pass up the deal Link to comment Share on other sites More sharing options...
scoobydoobie Posted July 17, 2010 Share Posted July 17, 2010 I reused the stock hangers, and the fitment was dead on. Tips are straight, but admittedly they arent my favorite exhaust tips- but i couldnt pass up the deal Alright thanks. I will swap out the Rallitek hangers with the OEM and see if that fixes my issues. So basically 08+ w/Rallitek hangers and Bosal exhaust= great fitment, tucked tips 05-07 w/Rallitek hangers and Bosal exhaust = uneven tips, contact with bumper at times Link to comment Share on other sites More sharing options...
shopper Posted July 17, 2010 Share Posted July 17, 2010 I used the oem hangers and every thing is lined up perfect. No pic yet have been camping just got service so I will try to post some pics Sunday if you still want to see them scooby. For anyone who has doubts about this exhaust it sounds great. Not loud at all but still noticeable. Link to comment Share on other sites More sharing options...
jcdennis Posted July 21, 2010 Share Posted July 21, 2010 Alright thanks. I will swap out the Rallitek hangers with the OEM and see if that fixes my issues. So basically 08+ w/Rallitek hangers and Bosal exhaust= great fitment, tucked tips 05-07 w/Rallitek hangers and Bosal exhaust = uneven tips, contact with bumper at times Did you end up swapping out your hangers? If so, how'd it work out? I installed mine last night (in less than ideal conditions) and I think it looks pretty good. I'll post up some pictures here in a second when my computer stops having a break.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.