overl0ad Posted April 14, 2007 Share Posted April 14, 2007 anyone looked at the weapon R ones? Link to comment Share on other sites More sharing options...
Legacy2.5R Posted April 14, 2007 Share Posted April 14, 2007 from what i hear, weapon R is garbage. but if it works for the impreza, it will work just like the injen. Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 14, 2007 Author Share Posted April 14, 2007 from what i hear, weapon R is garbage. but if it works for the impreza, it will work just like the injen. I second that, i knew some one that had it and just threw it out. stick with injen or AEM. Link to comment Share on other sites More sharing options...
LegacyMUN2k6 Posted April 15, 2007 Share Posted April 15, 2007 I have an 06 2.5i. Just wondering what do i need to install and connect everything properly. Parts numbers and so forth. Link to comment Share on other sites More sharing options...
LegacyMUN2k6 Posted April 15, 2007 Share Posted April 15, 2007 Now all we need for the n/a is a ecu tune. If only someone out there would help out the n/a community. Link to comment Share on other sites More sharing options...
overl0ad Posted April 15, 2007 Share Posted April 15, 2007 but these have only 2 breather bits rite? cos i have a AUDM MY07 (USDM MY08) and they run 3 breather tubes... Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 15, 2007 Share Posted April 15, 2007 Hey guys, hopefully I will be getting the intake this week and I'll let you all know what's the deal with the 06's and 07's. Until then, stay tuned. Link to comment Share on other sites More sharing options...
LegacyMUN2k6 Posted April 15, 2007 Share Posted April 15, 2007 What else would be recommened along with this, im just looking to increase hp to 190hp. Link to comment Share on other sites More sharing options...
kiyanichenko Posted April 15, 2007 Share Posted April 15, 2007 idk if you will be able to get that high. i mean intake and lightweight pulleys is all we can do. you can do exhaust and headers. but thats about it. Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 16, 2007 Author Share Posted April 16, 2007 Now all we need for the n/a is a ecu tune. If only someone out there would help out the n/a community. http://www.rallitek.com/rapeecu.html It should work in the legacy! Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 16, 2007 Share Posted April 16, 2007 http://www.rallitek.com/rapeecu.html It should work in the legacy! Would be interesting to see someone get one and try it out. Should work most likely for 05 guys, not sure about the 06 and 07 2.5i Leggy cause of the AVLS. Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 16, 2007 Author Share Posted April 16, 2007 Would be interesting to see someone get one and try it out. Should work most likely for 05 guys, not sure about the 06 and 07 2.5i Leggy cause of the AVLS. Yea thats what im thinking, i stuck my neck out with the injen intake but im not sure if im willing to spend $400.00 on a hunch:confused: Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 16, 2007 Share Posted April 16, 2007 Yea thats what im thinking, i stuck my neck out with the injen intake but im not sure if im willing to spend $400.00 on a hunch:confused:Â ^ +1 Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 16, 2007 Author Share Posted April 16, 2007 could realy use that Hydro Sheild right about now! Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 16, 2007 Share Posted April 16, 2007 could realy use that Hydro Sheild right about now! Haha, mine's sitting in a UPS center somewhere in Ontario, Canada. I ordered from AutoAnything. Also, I still have no word of intake shipment! You order the Hydro Shield yet? Mine's expected to be here on Wednesday Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 16, 2007 Author Share Posted April 16, 2007 Haha, mine's sitting in a UPS center somewhere in Ontario, Canada. I ordered from AutoAnything. Also, I still have no word of intake shipment! You order the Hydro Shield yet? Mine's expected to be here on Wednesday Nah im gonna order it tomorow probaly, luckly i didnt need to use my car today. I was looking more into that rallitek engine managment and found a site that says it will fit the legacy. The engine managment is basicaly for all non-turbo sooby's. Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 16, 2007 Share Posted April 16, 2007 Haha, mine's sitting in a UPS center somewhere in Ontario, Canada. I ordered from AutoAnything. Also, I still have no word of intake shipment! You order the Hydro Shield yet? Mine's expected to be here on Wednesday  Actually, that's Ontario, California. Oops! Haha. Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 17, 2007 Author Share Posted April 17, 2007 Actually, that's Ontario, California. Oops! Haha. :lol: Thats straight i knew what you ment. Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 17, 2007 Share Posted April 17, 2007 Hey JayMitch, is the port for the vac line on the passenger side 5/8" OD (Outer Diameter) or is it sticking out 5/8" from the intake? Measured the vac tubes this weekend and they are all 1/2" ID. This makes me wonder because the instructions say to place the tube over the 5/8" port but I don't know if that's 5/8" OD or 5/8" sticking out of the intake port. It definitely is shorter than the driver side's port. Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 17, 2007 Author Share Posted April 17, 2007 Hey JayMitch, is the port for the vac line on the passenger side 5/8" OD (Outer Diameter) or is it sticking out 5/8" from the intake? Measured the vac tubes this weekend and they are all 1/2" ID. This makes me wonder because the instructions say to place the tube over the 5/8" port but I don't know if that's 5/8" OD or 5/8" sticking out of the intake port. It definitely is shorter than the driver side's port. I dont know im gonna have to check. I didnt have to change any thing it all pluged in perfectly. the long hose they give you in the kit is used on the driver side while the passanger side vac line stays the same and just plugs into the intake. Link to comment Share on other sites More sharing options...
LegacyMUN2k6 Posted April 19, 2007 Share Posted April 19, 2007 I went ahead and ordered the intake polished silver with blue hydro shield. They discontinued the powered black one. Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 20, 2007 Share Posted April 20, 2007 Hey all, finally got my parts tonight. But I won't be installing everything until Saturday morning, after my oil change. It was dark when I got home tonight and I'll be hanging out with my buddies tomorrow night so no install till Saturday. But all the parts seem like they will mate up quite nicely. For 06, 07 guys, we need to buy extra tubing to hook up the two passenger side vac tubes into a tee that we also need to buy. Then from the tee, we use the extra hose to hook up to the intake. DISCLAIMER: I am posting the parts list in advance to my install because I know those interested want to know what needs to be bought and how to do it. I take no responsibility if you decide to buy the parts and find out that they don't work or that there is a CEL because you didn't wait to see what happens before I installed mine. I take no responsibility for your actions! I am just stating what I am going to use and going to do/or have done. Now back to your regularly scheduled program... Parts you'll need:A Tee Fitting that has 1/2" Barbs (all three barbs the same size) that can withstand high temperatures. Part number of the one I got from Goodyear is 64089, which is a "Molded heater hose connector". Cost: Approximately $5Extra hose that has 1/2" ID (Inner Diameter) that can withstand high temperatures, such as heater hose. Part number of the one I got also from Goodyear is GY120236, which is an "E-Z SHAPE Moldable Heater Hose". It's got these two metal things for bending the hose more easily. Cost: Approximately $15Finally, some extra hose clamps, in the appropriate size. Cost: Approximately $3Of course, you'll need the intake and if you like, you can also get a Hydroshield to go over the filter element. Parts can be substituted with what you think is a suitable alternative, but again it is your choice and not mine so I take no responsibility. Prices will also vary depending on where you are. Auto parts stores vary in what they carry, as I had to go to 3 auto stores, and 2 hardware/home repair stores to find everything I needed. In the end I bought items from 2 auto parts stores (Autozone for hose and PepBoys for tee, but both can be bought at autozone, in my area at least). Other places I went to are R&S Strauss, Strauss Auto Parts, Home Depot, and Lowes. Basically, it's like this: 2 vac hoses on passenger side ---> Tee Fitting Tee Fitting ----> Intake port/bung on the passenger side Driver's side is the same as in the directions that come with the intake. Look at JayMitch's previous posts and pics to get a better understanding as his insight was very helpful, you can also find instructions for the intake here if you desire to take a look before buying. Pics below, enjoy! http://farm1.static.flickr.com/230/465641798_7a10f7720f.jpg?v=0 http://farm1.static.flickr.com/225/465641862_dd3abbb8db.jpg?v=1177032498 http://farm1.static.flickr.com/220/465646503_0b9fecc3f6.jpg?v=0 http://farm1.static.flickr.com/167/465641898_b748794810.jpg?v=0 http://farm1.static.flickr.com/207/465641910_0d19e0b80f.jpg?v=0 http://farm1.static.flickr.com/178/465646493_9af6a8bab7.jpg?v=0 http://farm1.static.flickr.com/191/465646497_6a524b1e0b.jpg?v=1177032514 http://farm1.static.flickr.com/208/465646531_bd163dab2d.jpg?v=1177032531 EDIT: Minor fitment issue with vibramount in a different location, either don't use it (not recommended) or make a mount for it and help support it somewhat. Look at post 131 for pics and vids. Link to comment Share on other sites More sharing options...
Im That Guy Posted April 20, 2007 Share Posted April 20, 2007 I'm looking forward to reading about your install and results. I have an 06 and I'm interested in doing this to my Suby too. Link to comment Share on other sites More sharing options...
MonkeyHermit Posted April 22, 2007 Share Posted April 22, 2007 Hey all, intake works for 07 N/A's so far. Had some fitment issues that I will detail tomorrow as I have something to attend to for the rest of the night. But pics and vids tomorrow for sure! Link to comment Share on other sites More sharing options...
JayMitch2.5i Posted April 22, 2007 Author Share Posted April 22, 2007 Nice man happy to hear it works. Gotta check it out at the meet. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.