Mblock66 Posted May 24, 2006 Share Posted May 24, 2006 I am torn because I have a remote mount radar detector/laser jammer in my cubby taking up about 1/2" at the bottom, but I would like a gauge or two in there too... Ted I am having the exact same issue but I went with single 52 with cubby. The boost guage is the most important. So I would like to still have my ipod up there or phone etc Link to comment Share on other sites More sharing options...
MarcusDubya77 Posted May 24, 2006 Share Posted May 24, 2006 where at??sign me up :woowoo:check out the Diamond Gray Metallic Monster!!! Link to comment Share on other sites More sharing options...
mccorry Posted May 24, 2006 Share Posted May 24, 2006 where at??sign me up http://legacygt.com/forums/showthread.php?t=35241 Link to comment Share on other sites More sharing options...
Mungo Posted May 24, 2006 Share Posted May 24, 2006 Click on "Group Buy Has Started" above. Link to comment Share on other sites More sharing options...
SubiGT Posted May 25, 2006 Share Posted May 25, 2006 Would these fit and still allow the door to close? http://66.252.233.14/transfer/images/gauges/Remote.jpg http://66.252.233.14/transfer/images/gauges/EvilOsirisSeries.jpg Many Shuvs and Zuuls knew what it was to be roasted in the depths of the Slor that day, I can tell you! Link to comment Share on other sites More sharing options...
trabbic Posted May 25, 2006 Share Posted May 25, 2006 Would these fit and still allow the door to close? http://66.252.233.14/transfer/images/gauges/Remote.jpg http://66.252.233.14/transfer/images/gauges/EvilOsirisSeries.jpg I don't think so, because the gauge face is 60 mm and I think that is physically too large to fit. My vB Garage How to Install Steering Wheel Radio Controls Cubby Gauge Mounting Solutions Link to comment Share on other sites More sharing options...
TSiWRX Posted May 25, 2006 Share Posted May 25, 2006 trabbic/CasapoliS - Any of you guys around that area have access to a current-model AEM UEGO gauge (2 and 1/16, i.e. 52mm), that can verify fitment of this item, including door closure, in a DOUBLE gauge mount format? The trouble with this particular gauge is that although it's diameter is right, it's got a big and rather "fat" bezel portion..... Thanks in advance! <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
trabbic Posted May 25, 2006 Share Posted May 25, 2006 trabbic/CasapoliS - Any of you guys around that area have access to a current-model AEM UEGO gauge (2 and 1/16, i.e. 52mm), that can verify fitment of this item, including door closure, in a DOUBLE gauge mount format? The trouble with this particular gauge is that although it's diameter is right, it's got a big and rather "fat" bezel portion..... Thanks in advance! TSi, I just looked up that gauge, and I am almost positive that it will not fit with the angled cubby... It MIGHT fit without the angles. However I am pretty sure we don't have access to one out here, to test fit one. Why not make a road trip? My vB Garage How to Install Steering Wheel Radio Controls Cubby Gauge Mounting Solutions Link to comment Share on other sites More sharing options...
TSiWRX Posted May 25, 2006 Share Posted May 25, 2006 Hey bro, Thanks for the PM - well, I see there's no need to "edit" my post here, now! Thanks again for your PM - please consider this post to by my latest "word" on this panel. I will take your statements above to-heart and hold-off on this purchase 'till a later date. Thanks yet again! <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
CasopoliS Posted August 17, 2006 Author Share Posted August 17, 2006 ooooh the memories of this thread. It all started not too long ago. in a shitty town far far away.... in the armpit of Ohio. bumpin for old times sake. Link to comment Share on other sites More sharing options...
J.R. Posted August 17, 2006 Share Posted August 17, 2006 Did you ever look into the 3 gauge panel that replaced the cubby completely? Link to comment Share on other sites More sharing options...
meier motor sports Posted August 21, 2006 Share Posted August 21, 2006 i think that peice would be to big for the machine. i love how this idea went from idea to prototype to some more prototypes to a big freakin sucsess!! Link to comment Share on other sites More sharing options...
CasopoliS Posted August 21, 2006 Author Share Posted August 21, 2006 i think that peice would be to big for the machine. i love how this idea went from idea to prototype to some more prototypes to a big freakin sucsess!! Actually it might work, but no guarantees. Even if it fits in the machine, it would cost too much. I would have to sell them for lots of money and build times would be so slow. Still looking into it, but not heavily. Lots more on my plate, in my real life. Yea.... I have owned my LGT for like 6 months. I saw the cubby... I saw some DIY jobs.... then I saw the future. and it came quickly. I could not have done it without a great forum like this. Seriously it would have sucked on my old Mazda forums... everyone on here is much more understanding and helpful. A+ LGT community! Link to comment Share on other sites More sharing options...
meier motor sports Posted August 22, 2006 Share Posted August 22, 2006 i would love to see a peice that could replace the entire vent/cubby/trip computer thingy and either had a plank plate on it or 1 set up for 3 guages or something i think a blank plate would be best. 1 designe and the end user could do with it what he wanted Link to comment Share on other sites More sharing options...
CasopoliS Posted August 22, 2006 Author Share Posted August 22, 2006 i would love to see a peice that could replace the entire vent/cubby/trip computer thingy and either had a plank plate on it or 1 set up for 3 guages or something i think a blank plate would be best. 1 designe and the end user could do with it what he wanted Now THAT is too big. I would never want to get rid of the vents or trip computer. I would not mine getting rid of the door, but that is it for me. Link to comment Share on other sites More sharing options...
meier motor sports Posted August 23, 2006 Share Posted August 23, 2006 Now THAT is too big. I would never want to get rid of the vents or trip computer. I would not mine getting rid of the door, but that is it for me. i dont mean get rid of the entire peice i mean re make the peice so insted of a door its just blank but still uses the vents and trip computer Link to comment Share on other sites More sharing options...
S4 Posted August 23, 2006 Share Posted August 23, 2006 i dont mean get rid of the entire peice i mean re make the peice so insted of a door its just blank but still uses the vents and trip computer You mean like this? http://www.subaru.com/microsites/spt/sptImages/H5010AG000.jpg Link to comment Share on other sites More sharing options...
meier motor sports Posted August 23, 2006 Share Posted August 23, 2006 no like this but 1 blank peice so u can do whatever u want to it Link to comment Share on other sites More sharing options...
TSiWRX Posted August 24, 2006 Share Posted August 24, 2006 ^ Now that looks like enough gauges to satisfy even me. Oh, wait, no, I'd need two more..... <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
CasopoliS Posted August 24, 2006 Author Share Posted August 24, 2006 ^ Now that looks like enough gauges to satisfy even me. Oh, wait, no, I'd need two more..... ricer No I am not going to offer anything like that . Link to comment Share on other sites More sharing options...
TSiWRX Posted August 24, 2006 Share Posted August 24, 2006 ricer ^ Oh, bro, I'm beyond even remotely being offended by that statement! I am a confessed Ricer, for life! <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
meier motor sports Posted August 27, 2006 Share Posted August 27, 2006 if u notice all the guages are Link to comment Share on other sites More sharing options...
TSiWRX Posted August 28, 2006 Share Posted August 28, 2006 ^ Oh damn, that's a classic, bro! <-- I love Winky, my "periwinkle" (ABP) LGT! - Allen / Usual Suspect "DumboRAT" / One of the Three Stooges '16 Outback, '16 WRX, 7th Subaru Family Link to comment Share on other sites More sharing options...
STIMD Posted September 3, 2006 Share Posted September 3, 2006 Really appreciate your efforts on this. I was considering how it might be possible to mount a hard drive type video/audio player in a similar fashion. What are the dimensions of the face so that I can find a player that will fit. Christian Link to comment Share on other sites More sharing options...
subie_dude05 Posted September 7, 2006 Share Posted September 7, 2006 http://legacygt.com/forums/%5BIMG%5Dhttp://img.photobucket.com/albums/v192/elishafire/gaugesclose.jpg%5B/IMG%5D where can you get a pod like this? i like the door eliminating design. thanks. http://img.photobucket.com/albums/v192/elishafire/gaugesclose.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.