IcEWoLF Posted April 17, 2018 Share Posted April 17, 2018 Anyone know if his will fit the 2018 legacy? http://www.subispeed.com/2015-subaru-wrx/exterior/front-lips-diffusers/subaru-oem-sti-front-under-spoiler-2018-wrx-2018-sti#.WtYujBZlCaM Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 17, 2018 Share Posted April 17, 2018 (edited) Anyone know if his will fit the 2018 legacy? http://www.subispeed.com/2015-subaru-wrx/exterior/front-lips-diffusers/subaru-oem-sti-front-under-spoiler-2018-wrx-2018-sti#.WtYujBZlCaM No it will not,you will have to do some cutting and adding to make it fit,if u wanna give it a try just get one them cheap ones on eBay and try it. Edited April 17, 2018 by PATS4LIFE Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 18, 2018 Share Posted April 18, 2018 No it will not,you will have to do some cutting and adding to make it fit,if u wanna give it a try just get one them cheap ones on eBay and try it. Damn, I was hoping a direct fit :/ I saw it on a jdm Subaru Legacy and thought it would be a direct fit. Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 18, 2018 Share Posted April 18, 2018 Damn, I was hoping a direct fit :/ I saw it on a jdm Subaru Legacy and thought it would be a direct fit. Yeah I wish it was direct also or I would’ve bought it in a heartbeat.. I believe they have one for 2018 at Japan parts site. Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 18, 2018 Share Posted April 18, 2018 Yeah I wish it was direct also or I would’ve bought it in a heartbeat.. I believe they have one for 2018 at Japan parts site. It’s like a 2 piece the Japan parts lip, and it’s two sides, it doesn’t really do anything in the front, just the sides. Link to comment Share on other sites More sharing options...
DarkCloud23 Posted April 19, 2018 Share Posted April 19, 2018 Well today, i swapped my stock fog housings for some Morimoto XB LED, oval housings with Yellow PPF film. I also painted my fog lamp covers gloss black to match my glossy black Gramlight 57CRs. BC Racing. Blox Racing. Whiteline. AVO Turbo. RalliTek. Gramlights Michelin. Optima. HKC-Speed. Nameless. AFE. K&N. WeatherTech. Morimoto. Solar Gard. PPF. 9H. Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 19, 2018 Share Posted April 19, 2018 The sti pedals just came in, will install it next week. Been busy with work... Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 19, 2018 Share Posted April 19, 2018 (edited) The sti pedals just came in, will install it next week. Been busy with work... Next week??just call of from work and install it,,LOL Edited April 19, 2018 by PATS4LIFE Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 21, 2018 Share Posted April 21, 2018 Just finished wrapping the hood,upper half of trunk,and bottom part of the rear bumper with Avery gloss pearl white vinyl ,but I might plasti dip the bottom rear bumper soon Link to comment Share on other sites More sharing options...
fullah Posted April 22, 2018 Share Posted April 22, 2018 Just finished wrapping the hood,upper half of trunk,and bottom part of the rear bumper with Avery gloss pearl white vinyl ,but I might plasti dip the bottom rear bumper soon I'm looking at your rear bumper like why does it look different. Then I realized u made the square exhaust cut outs. Looks nice. Have you thought about using some kind of edging or something to make it look more finished? Also I keep reading on the passenger side only one exhaust hanger has to be welded on on the 2.5. When I looked under my car it seems like both hangers have to be welded on? What am I missing? Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 22, 2018 Share Posted April 22, 2018 (edited) I'm looking at your rear bumper like why does it look different. Then I realized u made the square exhaust cut outs. Looks nice. Have you thought about using some kind of edging or something to make it look more finished? Also I keep reading on the passenger side only one exhaust hanger has to be welded on on the 2.5. When I looked under my car it seems like both hangers have to be welded on? What am I missing? Thanks,yes I will be adding something on the edges to make more cleaner,just don’t know what to use yes,but I think I will just use plasti dip so it’ll cover the imperfection of the edges. And yes you will have to have both hangers welded on the passenger side. Edited April 22, 2018 by PATS4LIFE Link to comment Share on other sites More sharing options...
Grnlantern1 Posted April 22, 2018 Share Posted April 22, 2018 Just finished wrapping the hood,upper half of trunk,and bottom part of the rear bumper with Avery gloss pearl white vinyl ,but I might plasti dip the bottom rear bumper soonHow did you Square Off the Exhaust outlets on the Bumper? Sent from my SM-G965U using Tapatalk Link to comment Share on other sites More sharing options...
fullah Posted April 22, 2018 Share Posted April 22, 2018 Thanks,yes I will be adding something on the edges to make more cleaner,just don’t know what to use yes,but I think I will just use plasti dip so it’ll cover the imperfection of the edges. And yes you will have to have both hangers welded on the passenger side. What about using the door edge trim they sell at the auto parts store? It has a u channel shape and very flexible. It should work! It's cheap too..like $3 for two pieces. Link to comment Share on other sites More sharing options...
Jimle1301 Posted April 22, 2018 Share Posted April 22, 2018 What about using the door edge trim they sell at the auto parts store? It has a u channel shape and very flexible. It should work! It's cheap too..like $3 for two pieces. Or the trim they sell now for the lip on rims and you can get them in different colors. Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 22, 2018 Share Posted April 22, 2018 How did you Square Off the Exhaust outlets on the Bumper? Sent from my SM-G965U using Tapatalk[/ I first used a painters blue tape and transfered in on a 28g steel plate,then use a 3mm tape to attach it,i will use plasti dip so it’ll make it look a little better. Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 22, 2018 Share Posted April 22, 2018 What about using the door edge trim they sell at the auto parts store? It has a u channel shape and very flexible. It should work! It's cheap too..like $3 for two pieces. Yes I actually check at my local auto store but none in stock:/ Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 22, 2018 Share Posted April 22, 2018 Finished wrapping side mirrors:) Link to comment Share on other sites More sharing options...
Da Roo Posted April 22, 2018 Share Posted April 22, 2018 Installed fully adjustable koni yellows and eibach springs. Also installed well visors. I now own the first 6th gen legacy with a full koni set up [emoji41]. Check the koni thread for pics. Sent from my LG-H871 using Tapatalk Link to comment Share on other sites More sharing options...
Pronto Posted April 23, 2018 Share Posted April 23, 2018 Finally took my winter tires off.... now I just need to find some time to detail the car inside and out. Link to comment Share on other sites More sharing options...
crudzinskas Posted April 23, 2018 Share Posted April 23, 2018 (edited) Washed the car for the first time this spring (finally a nice day). Clay barred the car for the first time - the car is almost 2 years old now. I was surprised how little contamination there was on the paint for not having a garage. Then I applied a cheap $5 ebay/amazon ceramic coating and so far it looks good. I was a bit nervous since the set came with no instruction or anything, but I figured the worst that can happen is that it eventually all crumbles off of the clear coat and the car is back where I started. The surface feels and looks great with it, and I'll see if it actually does anything for water shedding/easier cleaning once it rains later this week. If it looks good I'll probably get a few more 30mL bottles of it for how cheap it is, and it was honestly easier to apply and work with than a wax. Edited April 23, 2018 by crudzinskas added photo Link to comment Share on other sites More sharing options...
PATS4LIFE Posted April 24, 2018 Share Posted April 24, 2018 Just ordered me a sequential/switchback C-lights to replace my DD C-lights Also ordered 80mm switchback Halos. Link to comment Share on other sites More sharing options...
gathermewool Posted April 24, 2018 Share Posted April 24, 2018 Installed 20mm roll bar on my '15 Legacy 2.5i. Took me less than an hour, including cleanup. I haven't driven it since installation, but I'll report back any noticeable differences. I douched all fasteners with Deep Creep not too long ago, while bleeding the brakes and switching over to my all-season wheels/tires. Everything came apart very easily. It probably helped that this car spend up until last year down in North Carolina. I've put more rust on the frame this past winter than it had in it's previous three years of life! Gotta love New England snow (salt) storms. I've been making a habit of spraying bits with Fluid Film every time they're accessible, to stave off excessive corrosion. This is my first time using Fluid Film, but it seems to work well. After cleaning up the excess, I use the rag to wipe down my tools. We'll see how that goes, too. '15 FB25 Magnatec 0W-20 + FU filter (70,517 miles) RSB, Fr. Strut Bar, Tint, STI BBS, LED er'where Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 25, 2018 Share Posted April 25, 2018 (edited) Gosh, I might jump on these: https://www.subaru.jp/legacy/b4/design/exterior.html The front bumper skirts, $540 but it comes painted. Pricey, but I think it would look awesome. Also the chrome satin plated fog lamp cover (jdm) looks sweet, but I think I might go with the vinyl wrap route for that part. Edited April 25, 2018 by IcEWoLF Link to comment Share on other sites More sharing options...
Pleiades 3.6R Posted April 25, 2018 Share Posted April 25, 2018 Gosh, I might jump on these: https://www.subaru.jp/legacy/b4/design/exterior.html The front bumper skirts, $540 but it comes painted. Pricey, but I think it would look awesome. Also the chrome satin plated fog lamp cover (jdm) looks sweet, but I think I might go with the vinyl wrap route for that part. That's just a generic link to the car. Referring to this? Link to comment Share on other sites More sharing options...
IcEWoLF Posted April 25, 2018 Share Posted April 25, 2018 Yes, if you scroll down it should show the part. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now