cww516 Posted March 8, 2018 Share Posted March 8, 2018 I forget, did Fredrik hang on to the stock tranny when he did the STI 6-speed swap? If so, it probably won't get any easier than that to do a test fit. Link to comment Share on other sites More sharing options...
GTEASER Posted March 8, 2018 Share Posted March 8, 2018 I forget, did Fredrik hang on to the stock tranny when he did the STI 6-speed swap? If so, it probably won't get any easier than that to do a test fit.I will message him to see if his installer still has it. When I get mine I can take them over there for a test fit. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
A_A_ron Posted March 8, 2018 Share Posted March 8, 2018 (edited) I know BB did the STI swap and sent his stock transmission to Vince to design and fabricate. Edited March 8, 2018 by A_A_ron a word Build Thread Link to comment Share on other sites More sharing options...
cww516 Posted March 8, 2018 Share Posted March 8, 2018 I will message him to see if his installer still has it. When I get mine I can take them over there for a test fit. Cool, that's what I was getting at. Link to comment Share on other sites More sharing options...
GTEASER Posted March 8, 2018 Share Posted March 8, 2018 Fred just responded, his stock tranny has been sold. Surely we can find another. It would be great if Vince can have a larger pool of potential customers for all the hard work he's put into this design. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
A_A_ron Posted March 8, 2018 Share Posted March 8, 2018 That would be a huge boost for him and also probably get us cheaper production costs with the volume. Build Thread Link to comment Share on other sites More sharing options...
VR001 Posted March 21, 2018 Share Posted March 21, 2018 Plates are back from powder and look great! I am now accepting payments. Ebo03's set got sent out today. 4 sets are still available/ unspoken for. PM or email me vdahlae@gmail.com for order/ payment details. Link to comment Share on other sites More sharing options...
islandborn Posted March 21, 2018 Share Posted March 21, 2018 Plates are back from powder and look great! I am now accepting payments. Ebo03's set got sent out today. 4 sets are still available/ unspoken for. PM or email me vdahlae@gmail.com for order/ payment details. emailed! Link to comment Share on other sites More sharing options...
VR001 Posted March 27, 2018 Share Posted March 27, 2018 Link to comment Share on other sites More sharing options...
islandborn Posted March 28, 2018 Share Posted March 28, 2018 No cool branding name??? Link to comment Share on other sites More sharing options...
A_A_ron Posted March 28, 2018 Share Posted March 28, 2018 They are beautiful Build Thread Link to comment Share on other sites More sharing options...
VR001 Posted March 29, 2018 Share Posted March 29, 2018 No cool branding name??? I contacted a couple local guys that do thin laser work, no word back yet though... They are beautiful Link to comment Share on other sites More sharing options...
VR001 Posted April 26, 2018 Share Posted April 26, 2018 what happened to all the interest in these plates? price too high? only 2 sets have sold. I'll let the remaining sets I have go for $360 shipped buyer covers pp fees or gifts it. Link to comment Share on other sites More sharing options...
ebo03 Posted April 26, 2018 Author Share Posted April 26, 2018 Damn, sorry to hear that. Pony up guys! Link to comment Share on other sites More sharing options...
GTEASER Posted April 26, 2018 Share Posted April 26, 2018 (edited) It's all about cash flow. I've had a lot of other expenses this spring with my son's racing season starting and having to unexpectedly replace the water pump, etc, on my daily Forester. Plus, a guy here on the forum that I built a Koni setup for stiffed me and never paid me the nominal fee I charge for the work. I am still absolutely gonna get one it's just gonna be another month or two before I can come up with the funds. I sincerely apologize for the delay Vince! I truly appreciate what you have done for us and I will buy one of these from you very soon, I promise. Edited April 26, 2018 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Deadrick20 Posted April 26, 2018 Share Posted April 26, 2018 How many sets are left? I’m interested! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
cww516 Posted April 26, 2018 Share Posted April 26, 2018 What the heck, sign me up. It'll be a lot easier to convince myself to go with an 18G, STI cams, and WMI if I have these to install as well, right? Pretty sure that's how that works. PM on the way shortly. Link to comment Share on other sites More sharing options...
VR001 Posted April 27, 2018 Share Posted April 27, 2018 It's all about cash flow. I've had a lot of other expenses this spring with my son's racing season starting and having to unexpectedly replace the water pump, etc, on my daily Forester. Plus, a guy here on the forum that I built a Koni setup for stiffed me and never paid me the nominal fee I charge for the work. I am still absolutely gonna get one it's just gonna be another month or two before I can come up with the funds. I sincerely apologize for the delay Vince! I truly appreciate what you have done for us and I will buy one of these from you very soon, I promise. No worries I can totally relate! Thanks for the update!! How many sets are left? I’m interested! Sent from my iPhone using Tapatalk I believe I have 5 or 6 sets left What the heck, sign me up. It'll be a lot easier to convince myself to go with an 18G, STI cams, and WMI if I have these to install as well, right? Pretty sure that's how that works. PM on the way shortly. You got these will definitely help hold the power!! Link to comment Share on other sites More sharing options...
VR001 Posted June 12, 2018 Share Posted June 12, 2018 Bump not sure if I need to go a different route about advertising these plates. 0 sales through ebay so far. https://www.ebay.com/itm/253523921512 Link to comment Share on other sites More sharing options...
Mrstacy Posted June 12, 2018 Share Posted June 12, 2018 Bump not sure if I need to go a different route about advertising these plates. 0 sales through ebay so far. https://www.ebay.com/itm/253523921512 Folks look for ebay promotions that allow 15% to 20% off. I bought my set direct, but have yet to install. We all know it is nice to have projects in the pipeline for our awesome cars! Link to comment Share on other sites More sharing options...
Mrstacy Posted June 12, 2018 Share Posted June 12, 2018 Bump not sure if I need to go a different route about advertising these plates. 0 sales through ebay so far. https://www.ebay.com/itm/253523921512 I heard that a new low-cal ice cream brand was about to go out of business, but then they sent samples to all the top youtubers. Now they are one of top brands. Maybe find a youtuber willing to do the install and promote it? Link to comment Share on other sites More sharing options...
s2baru Posted June 12, 2018 Share Posted June 12, 2018 How many have actually installed this ??? Link to comment Share on other sites More sharing options...
A_A_ron Posted June 13, 2018 Share Posted June 13, 2018 I've installed them. Shifting feels a little bit tighter and I have more peace of mind when driving. Sent from my ONEPLUS A3000 using Tapatalk Build Thread Link to comment Share on other sites More sharing options...
VR001 Posted June 13, 2018 Share Posted June 13, 2018 I heard that a new low-cal ice cream brand was about to go out of business, but then they sent samples to all the top youtubers. Now they are one of top brands. Maybe find a youtuber willing to do the install and promote it? Great Idea! I need to find a popular Youtuber with a 5th gen or 15+ wrx. Link to comment Share on other sites More sharing options...
VR001 Posted June 13, 2018 Share Posted June 13, 2018 How many have actually installed this ??? I have 3 or 4 sets out in use right now, A_A_Ron has a very detailed write up of the install. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now