KFCConspiracy Posted July 15, 2014 Share Posted July 15, 2014 Ha the outback is barf. And we're bad mother-effer. Link to comment Share on other sites More sharing options...
DJMajickMan Posted July 15, 2014 Share Posted July 15, 2014 Added the "Italian Job" build list to first page. Noticed that Mannyapolis' spreadsheet of parts is no longer available on google. I had a copy of my own and it is attached in the first page. Anyone know what happened with Mannyapolis? Link to comment Share on other sites More sharing options...
3.6r Posted July 16, 2014 Share Posted July 16, 2014 I just ordered the Takeda intake for my 3.6r legacy. Anything I should know about the install, or will it go right on? Does it sound like it has intake on it. Or does the engine just get louder? Thanks guys Link to comment Share on other sites More sharing options...
nstg8r Posted July 16, 2014 Share Posted July 16, 2014 I just ordered the Takeda intake for my 3.6r legacy. Anything I should know about the install, or will it go right on? Does it sound like it has intake on it. Or does the engine just get louder? Thanks guys http://legacygt.com/forums/showthread.php/takeda-3-6r-intake-review-218739.html?p=4680590#post4680590 Link to comment Share on other sites More sharing options...
fredrik94087 Posted July 16, 2014 Author Share Posted July 16, 2014 I just ordered the Takeda intake for my 3.6r legacy. Anything I should know about the install, or will it go right on? Does it sound like it has intake on it. Or does the engine just get louder? Thanks guys 3.6R mod list has a handful of installs...take your pick. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Perscitus Posted July 21, 2014 Share Posted July 21, 2014 (edited) Found this little gem over @ NASIOC. Skip ahead to 7:15 and enjoy! Mighty Car Mods building a sleeper "11 second gramps" 95 GX Liberty/Legacy wagon using a 2011 3.6L EZ36D from a FHI factory QA control Tribeca. And yes... its got BOOST! [ame=http://www.youtube.com/watch?v=2A47LYAcakg&feature=player_embedded]Gramps the 11 Second Car - Build Part 1 - YouTube[/ame] BTW - speaking of MAF vs MAP, SD, etc. Here is a good read: http://www.enginebasics.com/EFI%20Tuning/MAP%20vs%20MAF.html Edited July 21, 2014 by Perscitus Link to comment Share on other sites More sharing options...
stevenc1703 Posted July 21, 2014 Share Posted July 21, 2014 Found this little gem over @ NASIOC. Skip ahead to 7:15 and enjoy! Mighty Car Mods building a sleeper "11 second gramps" 95 GX Liberty/Legacy wagon using a 2011 3.6L EZ36D from a FHI factory QA control Tribeca. And yes... its got BOOST! [ame=http://www.youtube.com/watch?v=2A47LYAcakg&feature=player_embedded]Gramps the 11 Second Car - Build Part 1 - YouTube[/ame] BTW - speaking of MAF vs MAP, SD, etc. Here is a good read: http://www.enginebasics.com/EFI%20Tuning/MAP%20vs%20MAF.html I love these guys, they do stuff that nobody ever tries. This will be a good one to watch. Link to comment Share on other sites More sharing options...
ncfree Posted July 21, 2014 Share Posted July 21, 2014 Awesome. Link to comment Share on other sites More sharing options...
DJMajickMan Posted July 21, 2014 Share Posted July 21, 2014 Found this little gem over @ NASIOC. Skip ahead to 7:15 and enjoy! Mighty Car Mods building a sleeper "11 second gramps" 95 GX Liberty/Legacy wagon using a 2011 3.6L EZ36D from a FHI factory QA control Tribeca. And yes... its got BOOST! [ame=http://www.youtube.com/watch?v=2A47LYAcakg&feature=player_embedded]Gramps the 11 Second Car - Build Part 1 - YouTube[/ame] BTW - speaking of MAF vs MAP, SD, etc. Here is a good read: http://www.enginebasics.com/EFI%20Tuning/MAP%20vs%20MAF.html So I could turbo my 3.6R....hmm what about the super charger plus turbo? ItalianLegacy???? Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
DJMajickMan Posted July 22, 2014 Share Posted July 22, 2014 Part 2 posted Link to comment Share on other sites More sharing options...
ItalianLegacy Posted July 22, 2014 Share Posted July 22, 2014 Im super excited to see how much the block can take!!! Link to comment Share on other sites More sharing options...
bradze Posted July 24, 2014 Share Posted July 24, 2014 just found this thread, any more info on the 3.6r with the raptor supercharger? Link to comment Share on other sites More sharing options...
fredrik94087 Posted July 24, 2014 Author Share Posted July 24, 2014 just found this thread, any more info on the 3.6r with the raptor supercharger? First page for every 3.6r build list. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
DJMajickMan Posted July 24, 2014 Share Posted July 24, 2014 Video's 3 & 4 are up. I'd love to know what the build cost is on just doing the conversion on the motor and installing the 6 speed manual. Link to comment Share on other sites More sharing options...
Perscitus Posted July 24, 2014 Share Posted July 24, 2014 I like those custom headers! Wonder how they will compare to the Raptor sets (ETA next week!) Link to comment Share on other sites More sharing options...
fredrik94087 Posted July 24, 2014 Author Share Posted July 24, 2014 I like those custom headers! Wonder how they will compare to the Raptor sets (ETA next week!) are the raptors equal length or unequal length? "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Perscitus Posted July 24, 2014 Share Posted July 24, 2014 I believe and hope its still ELH (Giovanni, Tim - pls confirm). As much as I'd love some H6 rumble, I don't want to sacrifice performance. Link to comment Share on other sites More sharing options...
GTEASER Posted July 24, 2014 Share Posted July 24, 2014 Those look to be UEL. I dont like the flow characteristics of how the runners join up. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
ItalianLegacy Posted July 24, 2014 Share Posted July 24, 2014 raptor headers will be equal length. Link to comment Share on other sites More sharing options...
fredrik94087 Posted July 24, 2014 Author Share Posted July 24, 2014 Those look to be UEL. I dont like the flow characteristics of how the runners join up. I agree...it needs less of an angle. It looks like exhaust gasses from #1 and #3 are going to be bouncing aginst each other and interfering with #2. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
GTEASER Posted July 25, 2014 Share Posted July 25, 2014 Restricted on space is no excuse for a shoddy design. The look on the face of the guy holding the headers tells me he's a little embarrassed by them. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
fredrik94087 Posted July 25, 2014 Author Share Posted July 25, 2014 Restricted on space is no excuse for a shoddy design. The look on the face of the guy holding the headers tells me he's a little embarrassed by them. Since they are UEL, and they are not trying to match lenths, they could have run them closer together allowing the runners to have less angle. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
ItalianLegacy Posted July 26, 2014 Share Posted July 26, 2014 http://img.tapatalk.com/d/14/07/26/gagydyva.jpg Link to comment Share on other sites More sharing options...
ItalianLegacy Posted July 28, 2014 Share Posted July 28, 2014 it's you! Tim just told me Link to comment Share on other sites More sharing options...
stevenc1703 Posted July 29, 2014 Share Posted July 29, 2014 What is the spark plug gap supposed to be on our car? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now