Nightmaresmk Posted July 24, 2015 Author Share Posted July 24, 2015 I cheated i bought this kit added in a custom bracket to hold the fpr i bent up and an -6AN plug. The T is in the pictures. http://smyperformance.com/index.php/iag-performance-top-feed-fuel-full-kit-w-aeromotive-6-fpr-gauge.html My tune was Done by TurboTekRay. The fuel temp may be affected by my phenolic spacers and the fact it goes away from the block. but it still deals with under hood temps. I routed my lines so it was easy to setup. lol No issues with them on my ID1000's Link to comment Share on other sites More sharing options...
Nightmaresmk Posted September 1, 2015 Author Share Posted September 1, 2015 (edited) Pictures from 8/29/15's Local Groups picnic. So much i still need to fix but i love it. http://imageshack.com/a/img901/1994/4rNUUM.jpg http://imageshack.com/a/img538/1280/H4ftzu.jpg Edited September 7, 2015 by Nightmaresmk Link to comment Share on other sites More sharing options...
Nightmaresmk Posted October 9, 2015 Author Share Posted October 9, 2015 Spare motor will need a little more work. http://imagizer.imageshack.us/v2/1280x1024q90/903/jbTSp3.jpg Link to comment Share on other sites More sharing options...
Nightmaresmk Posted April 22, 2020 Author Share Posted April 22, 2020 Well OLD dog is back. I sold it and then bought it back a year later. i have alot of TLC to give it.  New suspension is order JDM bilstiens  New Raxles for the front. boots were torn and they were for an outback.  Finally doing a cat-back and a bigger turbo. It has an IAG stg 2 block front brembos and little other additions i will be adding updates on later. lots of parts are changing and a retune soon. http://imageshack.com/a/img922/6193/H4Qmod.jpg http://imageshack.com/a/img922/7682/DPxggz.jpg Link to comment Share on other sites More sharing options...
Flinkly Posted April 22, 2020 Share Posted April 22, 2020 Woot! * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
Febreze Mee Posted April 22, 2020 Share Posted April 22, 2020 Look at that shiny thang! Congrats on your re-purchase. MILKRUNÂ - Click Here Link to comment Share on other sites More sharing options...
Nightmaresmk Posted April 23, 2020 Author Share Posted April 23, 2020 Thanks. Right now it’s in the air no wheels or suspension axles ready to pop out. Link to comment Share on other sites More sharing options...
jonnyt88 Posted April 23, 2020 Share Posted April 23, 2020 Where about in upstate NY are you? Syracuse here and I used to drag my bottom all around town.. I'm considering doing a LGT / OBXT hybrid suspension for this coming winter. Link to comment Share on other sites More sharing options...
Nightmaresmk Posted April 23, 2020 Author Share Posted April 23, 2020 I'm in Averill Park. I'm going to be offloading the Koni's and lowering springs that came on it for cheap soon. The passenger front was leaking fluid so it needs a rebuild or replacement. Link to comment Share on other sites More sharing options...
Nightmaresmk Posted August 20, 2020 Author Share Posted August 20, 2020 Little update new lower pipes and upper pipes are Powder coated Misty midnight. Link to comment Share on other sites More sharing options...
ViscousSquirrel Posted August 26, 2020 Share Posted August 26, 2020 That's one killer outback, nice work Link to comment Share on other sites More sharing options...
Nightmaresmk Posted August 26, 2020 Author Share Posted August 26, 2020 Here is the work from the weekend. I have a carpi-tunnel so my left hand doesn't allow me to work like i use to. AVO catback. XL12 hangers, dressup bolts, It runs again after the alinment i will redo the fuel system and put on the 20g. Link to comment Share on other sites More sharing options...
Nightmaresmk Posted August 31, 2020 Author Share Posted August 31, 2020 Got her off the stands and out of the garage. need to replace the clutch Slave and re bleed the brakes but shes cleaner. I love how it sits now. Â Link to comment Share on other sites More sharing options...
Spoolin06XT Posted September 6, 2020 Share Posted September 6, 2020 Here is the work from the weekend. I have a carpi-tunnel so my left hand doesn't allow me to work like i use to. AVO catback. XL12 hangers, dressup bolts, It runs again after the alinment i will redo the fuel system and put on the 20g. Â Sweet set up you got there! Did you have the exhaust custom made? Where did you get your Hella brackets? Did you make your own harness for them? Link to comment Share on other sites More sharing options...
Nightmaresmk Posted September 8, 2020 Author Share Posted September 8, 2020 Exhaust is AVO took about a month a half to get it from Japan. Bracket is Grimmspeed probably 2012-2013 Trans is currently out of the car. bad throw out bearing. Link to comment Share on other sites More sharing options...
pdXammo Posted October 21, 2020 Share Posted October 21, 2020 I'd love to see more about how this bumper core and cover integrate with the FMIC? Love what you are doing thus far. Worth it to do the AVO vs. Just buying piping? It seems this kit keeps you far closer to stock configuration than the generic builds I've seen. Link to comment Share on other sites More sharing options...
Nightmaresmk Posted October 21, 2020 Author Share Posted October 21, 2020 I will grab some pics when i can. i would suggest an ETS front mount before the AVO. you loose your tow hook in the front. Plus i had to customize it more with custom pipes and brackets to make it work. idk about keeping the fogs yet with the new pipes. i haven't really updated because i am having clutch issues and i pulled the trans and put it back in with out getting it working. Link to comment Share on other sites More sharing options...
Nightmaresmk Posted October 18, 2021 Author Share Posted October 18, 2021 Sorry i got busy and haven't posted in a while. I Still have it and it is running i have a second 19 outback as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now