Brunzo

DRL relay is in the box under the hood.

I do nothing with my car for a long time. My tein suspension and JDM backdoor spoiler stuck in the middle of the shipping route due to covid as well as GPS tein active controller kit from Japan. Seems I have to postpone these upgrades till the next spring.

Different length of exhaust is between sedan/wagon. If your legacy is wagon - no problem to fit outback exhaust But I would prefer sti genome or HKS silent hipower over oem exhaust

Added front camera. Switching between cameras is done via a box from AliExpress for 10 bucks. The logic is following: ait switches in front cam for 20 seconds after the backup view cam (as we drive back and forth during parking). It also has external switch if you want to check what's going on any time.

Yes, it can. It's how i did (sorry, i publish my updates on other resource, here is the report with translation And satellite switch changes are published here

This is height leveling sensor with the arm for HID automatic leveling, i have it on my car: this one is front, there is similar on the back. If you want to change the arm - i advise you to make a custom one, like i did for the broken one on my Lexus: the joints can be purchased cheap on aliexpress (search for SQ6RS) or similar resources, you'll need some M6 thread nuts and M6 pin which you can shorten based on your arm length. Nuts and pin can be purchased in hardware stores.

Left audio switch is sharing same top connector with right cruise controls switch. Wiring available in internet.

I had old Navi replaced with face-lift navigation unit.

- Hertz HV165 XL - plays from 40 Hz If amp size fits under seats, why not?

I dont know how they do it, lost interest after price announcement. Why to pay more and get less? Browsed aliexpress, found brackets #Aliexpress € 16,63 10%OFF | TAOCHIS Car-Styling Frame Adapter module DIY Bracket Holder for Subaru Outback Hella 3 5 Projector lens Retrofit Frame https://a.aliexpress.com/_dYIrMsx

Another option is to restore the reflector, but here where i live it costs twice the bixenon lens price. But Bixenon has one more advantage - more high beam light is never enough.

It was here:https://legacygt.com/forums/showthread.php/did-you-do-your-5th-gen-todayii-v4-267765.html?p=5923624#post5923624

Its a well known issue with the headlights. The problem is with burned out lens reflector which looks like this: There is nothing bad in purchasing chinese hella 3r lens on aliexpress for up to 100 usd, just take the one with good feedback. I have solved same problem 4 years ago and my headlights are still fresh and shiny. The only issue is the high beam blind is shaking a little (i have installed bixenon lens) on bad roads. All you need is to purchase the lens, laser cut the lens conversion bracket, headlight glass sealing tape. Take the headlights out, heat the glass with heatgun, separate it from the body, remove old lens, cut some inner bracket to fit conversion frame, install the new lens, pair the wires from high beam to the lens shade, apply new sealant and put the glass on. Thats it. Wgen you do it, i recommend to fix the headlight before lens removal, switch it on and draw the beam contour. The after replacement fix the headlight same way and adjust the bracket angle with spacers for the same light cpntour to keep the same light beam configuration. If you need, i can write a thread in details about this repair (if not done already)

These wheels look like Enkei STI wheels with 5x114.3 PCD. Our cars have 5x100 PCD. Have you checked it? PS: These wheels are not BBS and not forged.

Check your audio has automatic volume (it depends on driving speed) and switch it off in menu (AVL or something). If you cant find this menu - try to disconnect CAN bus wires from radio and check how it behaivs. If the audio gets working back to normal then it seems like the vss sensor singal is not read correctly by ECU.

I got from this source: https://www.jdmfsm.info/Auto/

Received my new interior trims wrapped in real carbon fiber. Real carbon vs genuine fake carbon compared: Interior updated (7 pieces total):

Purchased recently silver interior trims and shipped straight to my friend in China, who organized carbon wrap for me. Got the picture of result (wrapped with real carbon) today and currently pending for shipping back to me:

The welcome screen can be set to ON or OFF through the cluster menu. Use your lower steering switch (bottom left side on picture) to access it.

Please stop me. The isolation makes me spending money on car mods like a mad. Today i purchased the complete rear gate door with JDM spoiler, as seller did not want to sell spoiler alone. Asked seller to remove the spoiler and ship it out. The borders are closed, can't get out to bring it home...

I have OE carbon trim set (my car was equipped with it from factory). it's not real carbon, but imitation. I don't like wood interior.

Largest rotors - 315mm in diameter for 2 pot front calipers. These came on tribeca also. You will need calipers, rotors, pads. Installation plug and play but will have to cut the edge of the dust plates for larger rotors. Rear brakes do not make upgrade sense as braking efficiency is important for front axis. I have upgraded mine this way. Please note - the smaller rim size is 17" for such setup. Another option is to take big brembo gold (or black) 4 pot fronts and 2 pot rears (usually from impreza sti) . It has smaller front braje rotorson front, and does not make grabbing noise. Front direct swap, rears - with the custom adapter.

It has presets and also automatic adjustments which depend on speed and G load. I purchased it as want to continue doing something with car, but not for sports use. Another purchase - interior trim set which was shipped straight to my friend in China. He will arrange real carbon wrap for me, as carbon wrap is a way expensive here.

Hey, just wrap yours with black polished aluminum imitation film as i did for mine. I have both original black headunit frame and wrapped middle console. These look almost identical.

Tein Flex Z full tap coilover kit + Tein EFDC Active controller kit. Cant wait but due to virus lockdown will not be that fast.