Infosecdad

49 minutes ago, AWDFTW said:

Following.  Where abouts in TN?

I'm hoping to have some pocket change after tax return this year.  Interested in the AVO brackets and Whiteline rear control arms.

Jackson, between Memphis and Nashville.

Bump in the quiet corner of the classifieds...

58 minutes ago, Flxr_88 said:

$100 +shipping sounds good. My zip code is 53403. How should we go about payment? Would PayPal be good?

PayPal or Venmo will be fine, I'll get that to you with the shipping estimate.

reserved

STi Genome Axleback -$450

Tomei Extreme ELH w/ uppipe - $400

3" HFC downpipe for Automatice - $400

Turbosmart dual port BOV - $150

Racetronix AOS w/ dual catch cans - $150

2006 LGT Wagon (4S3BP676X64303970)

Paint Code 35J (Regal Blue Pearl)

Rear ended and totalled. 

Bought back from insurance to part out.

If you need something not listed, please ask, I may have it.

If you are interested in something please let me know your zipcode so I can estimate shipping.

 

Drivetrain

Engine is good with a 16g turbo - TBD

5EAT automatic with the valve body upgrade - TBD

Grimmspeed TMIC w/ hoses, tapped for meth injection and an electric fan to pull air through from underneath. - $600

Grimmspeed Cold Air Intake with cover - $200

Turbosmart BPV - $100

Invidia Q300 Catback - $400

 

Suspension

AVO Rear swaybar bracket - $75

Front strut tower brace (fits Grimmspeed TMIC) - $100

 

Other

JDM Folding Mirrors - $200

P206UHB Stereo - $100

 

More to come...

 

SOLD

Grimmspeed Turbo Shield - $35  SOLD

Mishimoto Radiator - $100 SOLD

 

JDM front aluminum arms with Whiteline bushings - $200 SOLD

JDM rear aluminum arms with Whiteline bushings - TBD SOLD

AVO Front underbody support brace - $100 SOLD

AVO Rear underbody support brace - $100 SOLD

Whiteline KTA124 rear control arms - $200 SOLD

Grimmspeed alternator cover - $40 [SOLD]

JDM ABS cover - $50 [SOLD]

Grimmspeed radiator Shroud- $40 [SOLD]

 

1 hour ago, Flxr_88 said:

Awesome. How much would you want for them? And they work as far as you know, correct? 

They were working when removed for a topfeed conversion or TGV delete. 

If they don't work for some reason, I have another set that was also working when removed; they are just still connected to an intake and fuel lines.

How about $100 + shipping, if you want to message me your zipcode I'll get a shipping estimate.

 

Looks like I have a set of OEM sidefeed TGVs from an '06 LGT, 2005-2006 used the same TGVs (14011AB432).

 

I have 2 or 3 sets, what I don't remember is how complete they are; I'll find them this weekend and let you know.

I may have a set of side feed TGVs from an '05 or '06 LGT if you are interested.

Hope you find something that can make use of it, it'll help if you add a general location in the title or post.

I've replaced the intake pipe a couple times without removing the manifold, it's doable, but not fun.

Not sure how much wire you need, but iwire sells the MAP connector with pigtail.

https://iwireusa.com/collections/5-9-pin-replacement-plugs/products/mass-air-flow-sensor-maf-plug-a?variant=40734171562137

If you need a lot, maybe you can ask them to give you a couple foot of wire for the pigtail.

 

In the meantime, maybe you could unwrap the current harness and isolate each of the wires so they aren't shorting on each other?

13 minutes ago, Claw said:

I replace the front two coil packs a couple of years ago (misfire, rough idle), but I think the rears are due for replacement this year.. what brand should I get from Rock Auto? NGK and Denso I recognize from the forums here.

 

Diamond Electric is OEM, NGK is probably ok as well.

I tried working in the garage this afternoon, but it's 14f out and the garage is not heated or well-insulated.

I have most of the rear suspension removed, it's time to go after the front and prep the engine/trans for removal.

Then I'll need to build the chassis dolly to get it off the quick jacks.

Bins and bins of parts that I need to figure out what's going to the white wagon and what's going for sale back into the community.

2 hours ago, SubOperator said:

I did the roof when I had the headliner out. Also I did the rear gate since I had the trim off anyway.

All this combined made the car much more quiet.

I plan to do my roof when I pull my headliner to dye it black.

6 hours ago, Ashtone said:

@infosecdad:

what color is the interior? Does the sunroof still have the little arms that pull back the sunshade?

Im looking to buy those and the door weatherstripping and some tan interior pieces.

thanks!

It's tan, sent you a PM

Slowly working on planning and pulling parts from the blue wagon.

I think I'm going to build a chassis dolly so I can part all the suspension and bracing from the wagon, there is just too much good stuff there that I don't want to lose.

According to cars101.com (https://www.cars101.com/subaru/legacy/legacy2006.html) the FD for the 5EAT is 3.272

Looks like '05-07 5EAT are all the same FD, but in '08 the 3.0R was the same, but the GT is different...

Moved the thread to the 4th Gen section

I might have one available in the near future, but I'm not sure shipping will be worth it for you.

Where are you located?

That's most likely for an aftermarket gauge of some sort.

Power, Ground, Signal, and Illumination by the looks of it.

9 hours ago, BoozeRS05 said:

I’d be ok with $8k for my wagon if totaled, but only if I could buy it back for next to nothing, and keep/sell everything salvageable

I'm a bit below $8k, but the buy back is $500 so I'll end up being ok in the end.

Just have to work for it in the part out.

6 hours ago, SubOperator said:

It was `Dishwasher`, even though he was in commercial fleet insurance he knew a few things about personal cars insurance as well.

@Infosecdad Brian what's your insurance company? I feel that list of requirements is fairly restrictive.

USAA. They have been good to me for years, so not mad at them, just trying to get what I can for reasonable replacement.