WRX USA

Did you already modify it? CORRECTION: I ordered the rear beam from eBay. The part number below is for the front beam that has the hoses for the washer headlights in it. I ended up ordering the correct beam through Partsouq. I don’t know if JDM Outback and JDM Legacy have the same beam but I ordered a 57712AG320 which Partsouq doesn’t have in stock but you may be able to find elsewhere (and confirm fitment beforehand).

I did swap in a JDM reservoir and the 3rd larger pump. I’m pretty sure I bought them new from Partsouq. I installed it in 2016-17, and at the time I wasn’t that adventurous with wiring so I just left it disconnected.

I’m curious about your solution as mine are still not wired up.

If this is the Alpine amp that you have then 40A is the current draw. and 25A on the other one:

The only extra step is finding out the current draw of the item that you want to connect, which will be in the manual. I always do a Google search with the model # and “PDF” to find the manual. I couldn’t read the model number of your amp in your pictures, otherwise I would have done that step.

Here’s a chart that helps with wire gauge selection:

No, how is this different from your other question asking if they only came for RHD originally?

Yes

Looks right. You can just see it in this pic from one of the active Yahoo Auction’s with an S402,

I’d be interested in one of those EDM 2 DIN panels, if you can get it. My EDM dash trim likes to fall off, because of the ill fitting JDM 2 DIN. Makes the car feel really cheap.

I did a similar swap on an ‘09 OBXT. From the pics it looks like all of the major pieces are there. I merged the USDM and JDM headlight harnesses to get my headlights working but something like this will make getting the headlights connected a lot easier: https://www.legacyoddsnends.com/product-page/bl-bp-postface-complete-jdm-to-usdm-harness

That they would increase performance is completely counterintuitive to me. This would be purely for smog.

When did you get that done? I have everything deleted too but if I wanted to increase injector size or do anything else, they told me that I would need to add the new “deletes” for smog (DEQ).

I know in Oregon if I wanted any new tune from Surgeline (regardless of whether I’m adding any new parts) it would require me to add the IAG TGV deletes V3 (https://www.iagperformance.com/iag-v3-top-feed-tgv-housings-with-butterfly-pass-thru-06-14-wrx-07-sti-07-12-lgt-09-13-fxt/)

Does the ETS retain the fog lights? 454hp/442tq isn’t bad on a TMIC, understood it could be more with a FMIC. For me it was about retaining the front crash beam. I have a Syms lightweight beam that I haven’t installed because of that.

It’s amazing how the mic just blends in. I can’t even see it in the second pic!

Pretty sure that grille is for a center channel speaker, not a microphone

I'm running the Perrin turbo inlet now but I had the HKS before. I powdercoated it black since I was in California at the time and I had no problems passing visual inspection for smog, since it looked OEM. The reason that I switched to the Perrin is that the HKS didn't work with any intake and I needed more air.

I haven’t really driven the OBXT in a couple years. It’s been so long that I need to get it re-registered which requires driving it around aimlessly to get all of the sensors back to readiness. It lives in my garage. The Plaid makes everything feel slow, and also as I’m getting older, the OBXT seems crazy loud. I also have a tuned supercharged 2020 Tacoma TRD Pro which I regularly drive. From time to time I consider selling the OBXT.

I wish I was out there to join in the OBXT. I am little confused though. How is planning months ahead “spontaneous”?

Both, butt and back

That’s a blob-eye. It does look good.

Since Tire Rack sells that size TS-5 yet doesn’t show it offered for the 2004 STi, it would be because it doesn’t fit a stock configuration (without a spacer). Good luck!

Looks like they should. I always use Tire Rack and enter 2004 WRX Impreza STi to make sure wheels will fit because of the 5x100 and Brembo’s. https://www.tirerack.com/wheels/results.jsp?&autoMake=Subaru&autoModel=Impreza+WRX+STI&autoYear=2004&autoModClar=

This is all I’m seeing