WRX USA

Pretty sure that’s only a JDM “Tuned by STi”/S402 OEM part because the rear suspension is completely different than Impreza.

What about 2004 WRX STi? It has 5x100 pattern and the rotors have to be at least as big, most likely bigger.

I’ve seen people rationalizing paying a little more and getting a Rivian R1T too.

$65k for a 2024 Tacoma TRD Pro is a lot. I’m hoping it helps keep the third gen prices up since I have a 2020.

Sedan (and wagon) version available here: https://www.japanparts.com/parts/detail/?id=3074 Wagon version available here: https://avojdm.com/side-rain-visor-set-legacy-wagon/ They should have been available domestically.

That’s why I included the second link.

Wow, I didn’t realize the exchange rate is 4:1!

You could always swap to the Laille Beatrush rear frame end bar: https://beatrushusa.com/products/beatrush-rear-frame-end-bar-2004-legacy-bp5-bl5?_pos=4&_sid=4d6049824&_ss=r https://www.blackhawkjapan.com/collections/beatrush/products/laile-beatrush-s86103pb-ra

You probably don’t want to know that the Prova mirror doesn’t perfectly fit the USDM rear view mirror (at least on mine). Also if you have the STi “carbon fiber” cover it will only fit the JDM mirror.

It's JDM so you'd have to store it or find a reason to get a show and display exemption, or a Canadian address.

What is this black border around the reverse light?

No better time to throw this on: https://www.killerbmotorsport.net/high-flow-water-pump-housing-ej-series.html?gad_source=1&gclid=Cj0KCQjwzZmwBhD8ARIsAH4v1gVo_bJOSFaanjixB6p14-77O_WlWdAlfRVCtoyz1I3lx_RZAXMZap4aAmTFEALw_wcB

Sometimes you can get lucky contacting someone who is selling parts of a EDM center console and let them know you are looking for everything, like the seller of this piece: https://www.ebay.com/itm/256358423399?itmmeta=01HSY6ACY43EEP8G47NRDBFBBT&hash=item3bb0271b67:g:DEkAAOSwFF5ljrCN&itmprp=enc%3AAQAJAAAA8OeNColSUyDw4mcx951yNt%2FgCeWbic2pjrik4iIbWApCb3Ojj--cYBjIBBHMSHF765HtO03duaFf2yAoYQCzeW8%2F7XpAVExR0wqkaSFGAAK4OLXC4Rby2%2FjTS9Mt4zlDLhNdrx%2Bfs1GqDYc44k6Jk%2B8pbtkvSyxGJyLOPAId4BEXLgAm%2BxFZLuq%2BZkRBAwKvz%2ByrpE02qRgjauLEr9%2F6wZg25lpU9HzclJRy1xmgpHlrMaDCudMOu2PcRNjYwgJJCwN%2BN9RlWjeoJ6V1H%2Bg5tM2wPbAdoB60ysGXCqt5rGQZyNNZNyEbbXQwTkBw0O5CMQ%3D%3D|tkp%3ABk9SR5rPqcbPYw

@DoctorDaveLGT I have a lot of those rear console vent parts, minus the control door but I never got too far down the rabbit hole to figure out what is needed to make them work because it seems like everything needed is for a RHD car. Have you figured out a way to make it work?

I second that.

Any idea why the PO sold it so quickly? I am the second owner of a 2020 Tacoma with a similar story that I bought in July 2020 with 351 miles. The dealership said they traded it in on a Supra.

What did you have installed previously?

I was going to ask why you flipped your car over for pics.

How she currently sits:

Are you telling us about something that happened almost 4 years ago and if so how did it go? Or, are you talking about next Tuesday?

These gaskets come with an exhaust: https://www.japanparts.com/parts/detail/?id=20178

You may want to look at a coating like this: https://swaintech.com/race-coatings/race-coating-descriptions/white-lightning-exhaust-coatings/

Looks great! I’m sure you already know this, but the garnish that comes with those tails maintains the line across the back. https://page.auctions.yahoo.co.jp/jp/auction/u1079117248 I have the same JDM rear garnish as you but I’m running Valenti’s that don’t have any thing that matches with OEM. I did squirrel away a set of the tails that you have with this other garnish though.

The dash didn’t make it…

One of my neighbor’s had their house and NA Outback smashed by trees in the storms here a couple weeks ago. Of course, after this newspaper article they also had it burglarized. https://www.oregonlive.com/weather/2024/01/massive-falling-trees-destroy-portland-couples-house-making-them-feel-like-they-were-in-superhero-movie.html?outputType=amp