teegeezee Posted March 29, 2015 Share Posted March 29, 2015 S2baru just decided I will run coilovers (probably Tein Street Basis) so that gap should be long gone here soon. Have some Tein S-Techs for sale if anyone is interested. Link to comment Share on other sites More sharing options...
DC_Titus Posted March 29, 2015 Share Posted March 29, 2015 DC_Titus the tires are NANKANG NOBLE SPORT NS-20. The offset on the wheel is +40. I am interested to see your setup. Do not think anyone else had done a 10" wide wheel on 5th gen before. What wheel are you going to be running? I'm not going to say much about the EXACT wheels but they are probably eating some nice sushi about now. Thanks for the info! Link to comment Share on other sites More sharing options...
s2baru Posted March 30, 2015 Share Posted March 30, 2015 I went through the same setups too. Street basics for the value are awesome. I'm listing mine for sale soon. Stupid low for whoever wants em. UnSpokon has first dibs though. Link to comment Share on other sites More sharing options...
cjvc17 Posted March 30, 2015 Share Posted March 30, 2015 Teegeezee..definitely need more low brotha for those wheels. Cjvj17 for 18s those have to be the best looking I've seen yet. Dig em a lot! thanks man, appreciate it cheers Link to comment Share on other sites More sharing options...
faded-a-fool Posted March 30, 2015 Share Posted March 30, 2015 I'm thinking I probably can't fit 245/45 could I? 245/40 is currently on there. 1 inch taller would put me in the perch. http://tapatalk.imageshack.com/v2/15/03/29/85df951fd4709dcd8be77f8dd012e16e.jpg Link to comment Share on other sites More sharing options...
Zee199969 Posted March 30, 2015 Share Posted March 30, 2015 I think perscitus was running 245/45/18 on his RCE/bilsteins My "Build" Link to comment Share on other sites More sharing options...
DC_Titus Posted March 30, 2015 Share Posted March 30, 2015 You have to think 1 inch all the way around. So add 1/2" to top and 1/2" to bottom Link to comment Share on other sites More sharing options...
.clipse Posted March 30, 2015 Share Posted March 30, 2015 S2baru just decided I will run coilovers (probably Tein Street Basis) so that gap should be long gone here soon. Have some Tein S-Techs for sale if anyone is interested. yessss moar low will definitely set off those wheels. I'm running the same exact fitment, 19x9.5 +40 wrapped in 235/35 on bc br's Link to comment Share on other sites More sharing options...
carpenterltd Posted March 30, 2015 Share Posted March 30, 2015 19x8.5 Avante Garde M590 wrapped in 245-40-19 toyos Link to comment Share on other sites More sharing options...
ncfree Posted March 30, 2015 Share Posted March 30, 2015 I went through the same setups too. Street basics for the value are awesome. I'm listing mine for sale soon. Stupid low for whoever wants em. UnSpokon has first dibs though. Put me on that list next. Local pickup. Link to comment Share on other sites More sharing options...
GTEASER Posted March 30, 2015 Share Posted March 30, 2015 19x8.5 Avante Garde M590 wrapped in 245-40-19 toyos What scoop you got on there? GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Unsp0kn Posted March 30, 2015 Share Posted March 30, 2015 Put me on that list next. Local pickup. I hate to be that guy, but they are mine. You can haz the wheels though, whenever he decides to part with em! Link to comment Share on other sites More sharing options...
ncfree Posted March 30, 2015 Share Posted March 30, 2015 I hate to be that guy, but they are mine. You can haz the wheels though, whenever he decides to part with em! Hahaha roshambo? Link to comment Share on other sites More sharing options...
carpenterltd Posted March 31, 2015 Share Posted March 31, 2015 What scoop you got on there? WRX scoop from jcwhitney. I'm wanting a new hood, but am having trouble finding all the hardware for it. (under tray, trim pieces, etc.) Link to comment Share on other sites More sharing options...
s2baru Posted March 31, 2015 Share Posted March 31, 2015 Nate you definitely has dibs on the wheels. Link to comment Share on other sites More sharing options...
ncfree Posted March 31, 2015 Share Posted March 31, 2015 Gooood. Thanks man. Link to comment Share on other sites More sharing options...
emeth Posted April 2, 2015 Share Posted April 2, 2015 My car has that tire size, no fender pulling at ET45. Is ur car lowered? What did u use to lower it? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
emeth Posted April 2, 2015 Share Posted April 2, 2015 My car has that tire size, no fender pulling at ET45. How is ur car lowered? Mine is swift springs. Pls post pic of ur car Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Gardener91 Posted April 3, 2015 Share Posted April 3, 2015 Link to comment Share on other sites More sharing options...
fredrik94087 Posted April 3, 2015 Share Posted April 3, 2015 For a second, it looked a lot like a BMW "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
GTEASER Posted April 3, 2015 Share Posted April 3, 2015 ^^ You need glasses bud. Lol! GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
.clipse Posted April 3, 2015 Share Posted April 3, 2015 [attach]205844[/attach] nice wheels... Link to comment Share on other sites More sharing options...
fredrik94087 Posted April 3, 2015 Share Posted April 3, 2015 ^^ You need glasses bud. Lol! I needz a lot of things... "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
emeth Posted April 7, 2015 Share Posted April 7, 2015 Anyone can recommend a shop that perform fender roll/pulling? I never had rub issues with 235/35/19. To i changed to 245/40/19 and d tires would rub on small road bumps. I will post pics later. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
seankramer7.62 Posted April 7, 2015 Share Posted April 7, 2015 Anyone can recommend a shop that perform fender roll/pulling? I never had rub issues with 235/35/19. To i changed to 245/40/19 and d tires would rub on small road bumps. I will post pics later. Sent from my iPhone using Tapatalk Umm, seems like the wrong place to ask your question. I suggest you try posting your question in the regional forum section for your region of the world. Best of luck to you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now