qu1et Posted April 6, 2015 Share Posted April 6, 2015 Just got off from work with my leggy Link to comment Share on other sites More sharing options...
testa422 Posted April 7, 2015 Share Posted April 7, 2015 i want the center piece of the diffuser for sure...still not sold on the side pieces! car looks mean though...nice job! Link to comment Share on other sites More sharing options...
jackal8788 Posted April 7, 2015 Share Posted April 7, 2015 i want the center piece of the diffuser for sure...still not sold on the side pieces! Car looks mean though...nice job! +1! VF54 to 20G to VF54 to 18G build thread Link to comment Share on other sites More sharing options...
michelino1968 Posted April 7, 2015 Share Posted April 7, 2015 I'm in Shawnee and work in KCK. Haven't seen your car running around. ...hmmm, Würzburg plates... Nice Frankonian city with good wine and food, plus nice hills around for biking etc. Brings back memories, we often went there during a 3 month stay in Hammelburg in 1990. Link to comment Share on other sites More sharing options...
KCLeo12 Posted April 8, 2015 Share Posted April 8, 2015 I wish they made that center diffuser in Carbon Link to comment Share on other sites More sharing options...
carpenterltd Posted April 8, 2015 Share Posted April 8, 2015 I couldnt get my eyelids to stick to the headlight using 3M double-sided tape. It seemed like the mold was warped a tiny bit and they would pop off after a few minutes. How did you mount the eyelids? Did you do anything special? Any modifications? Hot glue gun...just like grade school lol Link to comment Share on other sites More sharing options...
carpenterltd Posted April 8, 2015 Share Posted April 8, 2015 I wish they made that center diffuser in Carbon They do...it's just going to cost you around $400. Japanparts. Link to comment Share on other sites More sharing options...
Falcor Posted April 8, 2015 Share Posted April 8, 2015 ...hmmm, Würzburg plates... Nice Frankonian city with good wine and food, plus nice hills around for biking etc. Brings back memories, we often went there during a 3 month stay in Hammelburg in 1990. I had to search through a ton of plates on Ebay to find one I really liked and definitely looked European. I made sure it was a front plate as well. It is pretty cool that the numbers tell you where it is from. Originally I put it on my Mini Cooper S, then my Jeep Wrangler, and now on the Outback. Cool thing is my family is German, so it kinda fits. Link to comment Share on other sites More sharing options...
Falcor Posted April 8, 2015 Share Posted April 8, 2015 I'm right off SMP and Monticello! I've never seen your either! Yes, they're carbon fiber but I painted over them OEM satin pearl. If you want to meet up one day, I have a spare set I will just give to you. I'm off 71st and Nieman. I'll PM you on getting together. Link to comment Share on other sites More sharing options...
michelino1968 Posted April 9, 2015 Share Posted April 9, 2015 I had to search through a ton of plates on Ebay to find one I really liked and definitely looked European. I made sure it was a front plate as well. It is pretty cool that the numbers tell you where it is from. Originally I put it on my Mini Cooper S, then my Jeep Wrangler, and now on the Outback. Cool thing is my family is German, so it kinda fits. In Germany the first part of the plate indicates the city (Wü=Würzburg, or e.g. M=Munich, B=Berlin, F=Frankfurt etc.). The major cities have 1 letter, medium-size cities have 2 letters, small urban areas 3. The rest is a combination of letters and numbers, similar to the US. The stickers - aside the city code - indicate the technical inspection date (rear plate) and the emission control date (front plate). As long as You stay in the same city You can keep the plates from one car to the other. When You move to another city You need new plates and - invalidating/ removing the 2 stickers from the old ones - You can also keep them as a "souvenir". I still have mine infact... Link to comment Share on other sites More sharing options...
KCLeo12 Posted April 9, 2015 Share Posted April 9, 2015 They do...it's just going to cost you around $400. Japanparts. Just messaged a buddy of mine in Japan to see what he can find for me. Also saw the front lip and trunk spoiler. I hope he can find it all for me. Link to comment Share on other sites More sharing options...
faded-a-fool Posted April 9, 2015 Share Posted April 9, 2015 (edited) If shipping cost wasn't so awful from Japanparts, i'd pick this up in a second as there is nothing stateside that will fit the Perrin quad tips on my car. Not a fan of the vents though Edit: I changed the pic not noticing that the lower piece i guess is separate at least according to this site. The lower piece is only about $107. If this would fit our cars, i wouldn't mind throwing down for it. Actually, you likely need the bumper too I included both pics. http://autostyle-usa.com/?pkey=item_info&i_code=CRA602418P0001&maker_url=corazon Edited April 9, 2015 by faded-a-fool Link to comment Share on other sites More sharing options...
carpenterltd Posted April 9, 2015 Share Posted April 9, 2015 That's sick...I'd pick that up in a heartbeat. Link to comment Share on other sites More sharing options...
Falcor Posted April 10, 2015 Share Posted April 10, 2015 That's sick...I'd pick that up in a heartbeat. I'm trying to PM you, but I don't think it's going through. Link to comment Share on other sites More sharing options...
Unsp0kn Posted April 10, 2015 Share Posted April 10, 2015 If you got creative and brave I'm sure you could cut the stock bumper to make that piece fit. Link to comment Share on other sites More sharing options...
GTEASER Posted April 10, 2015 Share Posted April 10, 2015 If you got creative and brave I'm sure you could cut the stock bumper to make that piece fit. There would be some serious fabrication involved. The stock rear bumper valance does not smoothly tuck under like that, it has a protruding horizontal ridge. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
testa422 Posted April 10, 2015 Share Posted April 10, 2015 If shipping cost wasn't so awful from Japanparts, i'd pick this up in a second as there is nothing stateside that will fit the Perrin quad tips on my car. Not a fan of the vents though Edit: I changed the pic not noticing that the lower piece i guess is separate at least according to this site. The lower piece is only about $107. If this would fit our cars, i wouldn't mind throwing down for it. Actually, you likely need the bumper too I included both pics. http://autostyle-usa.com/?pkey=item_info&i_code=CRA602418P0001&maker_url=corazon both bumpers are the same...the part painted black is the same part thats on the white one...the $107 is the little piece in the middle that the rear fog attaches too. ive long been in contact with japanparts about this bumper lol Link to comment Share on other sites More sharing options...
Unsp0kn Posted April 10, 2015 Share Posted April 10, 2015 There would be some serious fabrication involved. The stock rear bumper valance does not smoothly tuck under like that, it has a protruding horizontal ridge. That's what fiberglass is for! Link to comment Share on other sites More sharing options...
faded-a-fool Posted April 10, 2015 Share Posted April 10, 2015 If you got creative and brave I'm sure you could cut the stock bumper to make that piece fit. It has already been cut. Can't cut any higher as I will hit metal. http://legacygt.com/forums/showpost.php?p=4798560&postcount=111 There is a metal portion of the bumper on the inside of the cutout. http://legacygt.com/forums/showpost.php?p=4786863&postcount=99 Link to comment Share on other sites More sharing options...
badtiming Posted April 16, 2015 Share Posted April 16, 2015 If shipping cost wasn't so awful from Japanparts, i'd pick this up in a second as there is nothing stateside that will fit the Perrin quad tips on my car. Not a fan of the vents though Edit: I changed the pic not noticing that the lower piece i guess is separate at least according to this site. The lower piece is only about $107. If this would fit our cars, i wouldn't mind throwing down for it. Actually, you likely need the bumper too I included both pics. http://autostyle-usa.com/?pkey=item_info&i_code=CRA602418P0001&maker_url=corazon I need this Link to comment Share on other sites More sharing options...
badtiming Posted April 16, 2015 Share Posted April 16, 2015 NEEDZ MOAR GAUGEZ! Ha ha, just playin'... Looks good man! Some shots of the interior and in an underpass. http://img.tapatalk.com/d/13/10/22/eza4usyq.jpg http://img.tapatalk.com/d/13/10/22/janu3yse.jpg http://img.tapatalk.com/d/13/10/22/aqu7yzer.jpg http://img.tapatalk.com/d/13/10/22/yhyreva5.jpg http://img.tapatalk.com/d/13/10/22/ganezygu.jpg http://img.tapatalk.com/d/13/10/22/anepe6ap.jpg Sent from my iPad using Tapatalk HD Where did you get that cell phone mount from?? Link to comment Share on other sites More sharing options...
GTEASER Posted April 16, 2015 Share Posted April 16, 2015 http://www.proclipusa.com/dashboard-mounts/vehicle/subaru/legacy/2010-2014/proclip-console-mount-834426-13018.cmsv?p_leftorright=0 GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Hanger Posted April 16, 2015 Share Posted April 16, 2015 http://img.tapatalk.com/d/13/10/22/anepe6ap.jpg I'm picking up that front lip soon...should be here in 3 months! can't wait....:spin: ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
badtiming Posted April 16, 2015 Share Posted April 16, 2015 http://www.proclipusa.com/dashboard-mounts/vehicle/subaru/legacy/2010-2014/proclip-console-mount-834426-13018.cmsv?p_leftorright=0 Thanks! Link to comment Share on other sites More sharing options...
carpenterltd Posted April 20, 2015 Share Posted April 20, 2015 That's sexy interior I have to admit. Now I have a new project to do *sigh*. Might put good use to all that c/f vinyl I have laying around Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now