nomoreS4 Posted April 30, 2005 Share Posted April 30, 2005 After having it sitting in my garage since January, finally managed to install my JDM 20mm rear sway. Took me less than an hour, including cleanup. Luckily, I have a buddy with a hoist -- I wouldn't have wanted to wrestle with the sway bar with the car up on ramps! When I bought the sway, I also got the AVO adjustable endlinks, which I thought would be good to install since they're much beefier than the stock links. I tried adjusting them to make them the same length as the stock links, but found that there really wasn't much thread left on them when adjusted out...I guess they're really only meant for lowered suspensions. So, I'll hang on to these for when/if I lower. Wow...the 20mm sway really cleaned up a lot of rear end slop...noticeably tighter than before, not just cornering, but even feels more precise when going over bumps. Highly recommended! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.