LosAngelesLGT Posted October 20, 2011 Share Posted October 20, 2011 Can you come change my air filter? Im only 100 miles away. I work Mon-Sat and have school and a girlfriend and an active social life so you will have to work on the car in my apartment garage thats not lit after 220am Sunday when I get home from the bar. You may not come inside to clean up and a bathroom will not be provided. No eating or drinking will be allowed. You may be harassed by the management or police as we are not allowed to work on vehicles in the garage, so be quiet and don't use lights. BTW, I have a whole pile of parts I did not bother mentioning because I knew how excited you would be when I expect you to put them on the car free of charge. Also, I might cancel last minute or not show up if any cute or not so cute (drunk) girl looks at me in the bar. Im sure you will understand. See you then! /sarcasm Link to comment Share on other sites More sharing options...
m sprank Posted October 20, 2011 Author Share Posted October 20, 2011 Sounds like a plan. Lol. Whenever you figure out the logistics and what all you want done this round let me know. I have the inlet, FPR and bars. Can send out the KW's for a rebuild. I have wheels in stock to replace your bent one and curbed one(s). Etc. Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted October 21, 2011 Share Posted October 21, 2011 Been crazy. Im out of town more than in town; Im planning on getting towed to you tomorrow arriving before noon. Need: driver front wheel install, passenger rear wheel, KW rebuild, fpr/inlet/vac leak, sway bars/dump cuscos, endlinks. want: headlight housings, bigger turbo/sell vf39 (and a pump gas tune), (custom fmic/pipes?) wish: bbk ...already forgave the wife for the wheel anyhow... Link to comment Share on other sites More sharing options...
mk6933 Posted October 21, 2011 Share Posted October 21, 2011 What happened to u Max? You haven't been around lately. Link to comment Share on other sites More sharing options...
m sprank Posted October 21, 2011 Author Share Posted October 21, 2011 Can replace the lamps. If serious about the turbo let me know. New FMIC with new core is the key. But, if you dont want an off the shelf model, we can build one (heck Renee can build one too, Lol). BBK would be nice. But most options run in the $3k range. Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted October 21, 2011 Share Posted October 21, 2011 MK: Ive been out of town more than in town the last two months. When on the road, I don't feel the need to update facebook/LGT.com/etc on my whereabouts since folks like you who actually notice or might worry have my cell number. Mike: Lamps would be grand if you have time since it will sit for a couple of weeks. If I am going to go new turbo, I will obviously need a tune an may as well swap the FMIC too. Looking for at least 350/350 on pump and 400+/400ish on ethanol. A guesstimate price for FMIC fab/install, turbo and install and tune. Pretty sure I can get $1000+ for my used turbo+ new RacerX FMIC+old RacerX FMIC to help offset the cost. Wishlist... BBK is just NOT in the budget, ...and while Renee can definately do as good a job as you fab'ing up a FMIC he wont have my car for 3 weeks, can't get me tuned, has not really worked on it before and I'd rather give my money to you, Todd and the infamous crew too! Did I mention that Im finally got a buyer for my OEM exhaust. Boy I was stupid not to have taken the $80 and ran last year. Link to comment Share on other sites More sharing options...
m sprank Posted October 21, 2011 Author Share Posted October 21, 2011 Not a problem at all. We can talk about turbo options. Link to comment Share on other sites More sharing options...
m sprank Posted October 22, 2011 Author Share Posted October 22, 2011 going to subiefest today. see you there. Link to comment Share on other sites More sharing options...
m sprank Posted October 23, 2011 Author Share Posted October 23, 2011 Entered 1 car in the show. Best LGT and Best of Show. Woot!!! http://forums.nasioc.com/forums/attachment.php?attachmentid=67148&d=1319472012 http://forums.nasioc.com/forums/attachment.php?attachmentid=67149&d=1319472019 http://forums.nasioc.com/forums/attachment.php?attachmentid=67150&d=1319472027 http://forums.nasioc.com/forums/attachment.php?attachmentid=67151&d=1319472036 http://forums.nasioc.com/forums/attachment.php?attachmentid=67153&d=1319472074 Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted October 23, 2011 Share Posted October 23, 2011 Kicking ass and taking names! Link to comment Share on other sites More sharing options...
Infamous1 Posted October 23, 2011 Share Posted October 23, 2011 Something like that....lol I don't think SoCal is ready for us! Link to comment Share on other sites More sharing options...
m sprank Posted October 27, 2011 Author Share Posted October 27, 2011 I should have 30 of the all new Filtered Turbo Oil Supply Lines ready to ship Monday. End of next week by the latest. Taking orders now. $175 delivered. http://legacygt.com/forums/attachment.php?attachmentid=107296&stc=1&thumb=1&d=1319748838 Link to comment Share on other sites More sharing options...
m sprank Posted October 27, 2011 Author Share Posted October 27, 2011 Some pix of the office/lobby as it progresses. Link to comment Share on other sites More sharing options...
SBT Posted October 27, 2011 Share Posted October 27, 2011 Looks good - reminds me of being back in SoCal. Best to make sure everything is "temblor-proof" so when the San Andreas fault rattles no one gets pinged by falling parts. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
m sprank Posted October 28, 2011 Author Share Posted October 28, 2011 Safety wire can not be seen in pix. But it is there. Max is going with the new FP HTAGreen!!! Link to comment Share on other sites More sharing options...
Infamous1 Posted October 28, 2011 Share Posted October 28, 2011 Safety wire can not be seen in pix. But it is there. Max is going with the new FP HTAGreen!!! Oh now your're gonna have to go 35r.... Link to comment Share on other sites More sharing options...
SBT Posted October 28, 2011 Share Posted October 28, 2011 I was thinking about going with an AMR SLR T60R package... Might as well get some use out of that 500 AWHP FMIC. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
m sprank Posted October 28, 2011 Author Share Posted October 28, 2011 Oh now your're gonna have to go 35r.... With almost all the parts from last build gone now and the car sitting with just a motor and no TGV or manifold on her, no oil pan, no exhaust at all, no drive shaft, no brakes, etc, etc, etc... Why not go rotated? Its not like the car would be done anytime soon. I dont have the time or money to finish her now. But, if the shop grows... I have made payments on her for 18 months without being able to drive her. I still have 2 years of payments left. Would be nice to drive her again before the final payment. Link to comment Share on other sites More sharing options...
Infamous1 Posted October 29, 2011 Share Posted October 29, 2011 Oh boy yeah, three and a half years sitting would be horribly bad... Link to comment Share on other sites More sharing options...
Scooper Posted October 29, 2011 Share Posted October 29, 2011 Are the prices listed for the parts only? Would the same prices qualify if shipped? I wish you were my local mechanic... Link to comment Share on other sites More sharing options...
m sprank Posted October 30, 2011 Author Share Posted October 30, 2011 Are the prices listed for the parts only? Would the same prices qualify if shipped? I wish you were my local mechanic... Most prices are labor rates. Services (30k, 60k, 90k, timing belt) listed are parts and labor. For parts pricing, you can order on the website http://www.infamousperformance.net or end a PM or email for a quote. Link to comment Share on other sites More sharing options...
m sprank Posted November 3, 2011 Author Share Posted November 3, 2011 check out our upcoming toys for tots drive and meet! Link to comment Share on other sites More sharing options...
m sprank Posted November 9, 2011 Author Share Posted November 9, 2011 Infamous Performance is proud to announce our first Big Meet! We are planning an All Subaru meet, to be held at our new location. Saturday Dec. 10th. We will provide food, drinks, music and the locale. You bring a new, unwrapped toy to donate to the Marines Toys for Tots drive (we are an official collection site). Each toy provided earns a raffle ticket. Prizes will be awarded through out the day. Enjoy the atmosphere, food, etc and check out the cars, take pix, possibly a cruise after the Meet. Not cheapo lame prizes. We have official sponsors for awards. Brands like CNT Racing, ERZ Performance, Drag Wheels, Paranoid Fabrications, Turn14 distribution, FBP and IP&T. Prizes already donated for raffle include: ERZ 44mm EWG up pipe CNT Catted Down pipes (more than 1) Drag 18" wheels Paranoid Fabrications Saggy butt shims IP&T ACVS Oil line kits Gauges and more! Come join the fun, donate a toy and possibly win a Big prize. More info to follow. Thanks!!! http://legacygt.com/forums/attachment.php?attachmentid=107501&stc=1&thumb=1&d=1320289565 Link to comment Share on other sites More sharing options...
m sprank Posted November 24, 2011 Author Share Posted November 24, 2011 Happy Thanksgiving! Link to comment Share on other sites More sharing options...
SBT Posted November 24, 2011 Share Posted November 24, 2011 Same to you brother... have a good one. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.