TRBO SUB Posted April 25, 2014 Share Posted April 25, 2014 LGT cloth seats were all black/dark gray. Correct. I've had no luck on the general interior swap sticky in the general forums so I figured I might try my luck on here as well. Link to comment Share on other sites More sharing options...
nikitos05 Posted April 26, 2014 Share Posted April 26, 2014 Hello there, Im new to LGT world and trying to save some money on parts.... Does anyone happen to have an aftermarket Downpipe or Catback for 05-09 LGT? Link to comment Share on other sites More sharing options...
Eliott Posted April 26, 2014 Share Posted April 26, 2014 Hello there, Im new to LGT world and trying to save some money on parts.... Does anyone happen to have an aftermarket Downpipe or Catback for 05-09 LGT? Look at the member classifieds, saw a couple but you might have to pay extra for shipping if they're even willing to ship. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted April 26, 2014 Moderators Share Posted April 26, 2014 Hello there, Im new to LGT world and trying to save some money on parts.... Does anyone happen to have an aftermarket Downpipe or Catback for 05-09 LGT? I have a stock downpipe that has been gutted (no cat converters anymore) w/ a wideband bung welded in. Looking for $75 for it. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
nikitos05 Posted April 26, 2014 Share Posted April 26, 2014 I have a stock downpipe that has been gutted (no cat converters anymore) w/ a wideband bung welded in. Looking for $75 for it. thanks but im looking for a bell mouth/ aftermarket! Link to comment Share on other sites More sharing options...
SBT Posted April 30, 2014 Share Posted April 30, 2014 Reminder to everyone.. Our FS rules apply to the regional threads as well. If you have something to sell, or WTB, use the Marketplace to list it (rules for each sub-forum are posted at the top of that sub-forum - including this one). Then post the link to your thread in the regional thread. Thanks and if you have any questions, please PM. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
nikitos05 Posted May 2, 2014 Share Posted May 2, 2014 http://legacygt.com/forums/showthread.php/wtb-aftermarker-crank-pulley-05-lgt-mt-224768.html Link to comment Share on other sites More sharing options...
compsurge Posted May 3, 2014 Share Posted May 3, 2014 Any reason why you want to get an aftermarket crank pulley? It is highly recommended to NOT get a lightweight crank pulley. Link to comment Share on other sites More sharing options...
nikitos05 Posted May 3, 2014 Share Posted May 3, 2014 Whats wrong with an aftermarker pulley? Im getting a tune after it anyways cause im installing headers,up pipe, tmic, and boost solinoid. Link to comment Share on other sites More sharing options...
SBT Posted May 3, 2014 Share Posted May 3, 2014 Probably better (marginally) than a LWFW, but still doesn't provide the balance to the crank that the stock dampener pulley does. Just don't combine the two. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
nikitos05 Posted May 3, 2014 Share Posted May 3, 2014 I git a stick flywheel. I was thinking of getting a LW alternator pulley. Why do so many people fur LWCP on their sti/wrx/LGTs? Link to comment Share on other sites More sharing options...
nikitos05 Posted May 3, 2014 Share Posted May 3, 2014 Stock Link to comment Share on other sites More sharing options...
nikitos05 Posted May 3, 2014 Share Posted May 3, 2014 *run Sorry cant spell today Link to comment Share on other sites More sharing options...
SBT Posted May 4, 2014 Share Posted May 4, 2014 Many of those who are running a LWCP are also running LWA and LWPS pulleys too. The idea is to reduce the amount of turning "mass" and free-up horsepower. The lightest I recommend is a stock WRX FW and a LWCP. The stock CP is designed to dampen harmonic resonance in/along the crankshaft and to contribute to smooth off-idle and cruising-state power delivery. It's actually good for your engine. If you lighten that too much, you lose the ability to dampen the harmonics, which can effect your engine longevity, and you'll definitely notice an effect on the twitchiness of the power delivery. Rev easier, but lose revs much faster - and loss of dynamic inertia will affect your ability to engage and drive off from a standing start and to drive smoothly in all of the gears without constantly adding accelerator input. Steady-state is no longer "steady". Adding a LWFW to that mix, exacerabates that situation even more. Unless you're racing, and by racing I mean drag racing, where you're basically foot-to-the-floor from the lights to the finish, I'd think a WRX FW would be the lightest I'd go, period. Just changing out from the stock DMFW to the SMFW had a noticeable impact on the my wagon's driveability. Given that, I believe that lightening up the front side of the crank would cause the car to lose it's GT character. Like everything, YMMV. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
nikitos05 Posted May 4, 2014 Share Posted May 4, 2014 i dont see a problem with installing a LW alternator pulley? also kart boy makes a CP that is lighter then stock but not by much. i dont think it would ruin the dampening effect too much... Link to comment Share on other sites More sharing options...
SBT Posted May 4, 2014 Share Posted May 4, 2014 Probably better to take this to the tech forum. Less rotating mass (overall), increase in driveability and longevity issues. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
DONDOLO Posted May 5, 2014 Share Posted May 5, 2014 Is any one in the DMV area looking to lower their car and need rolled and pulled fenders? im looking to swap mine out, the person who had the car before me was into the slammed look. i am not. if any one knows any for sale or a junkyard i can look into please let me know. the color of them do not matter to me.. i have a 2006 spec B Link to comment Share on other sites More sharing options...
monstorr Posted May 5, 2014 Share Posted May 5, 2014 (edited) Is any one in the DMV area looking to lower their car and need rolled and pulled fenders? im looking to swap mine out, the person who had the car before me was into the slammed look. i am not. if any one knows any for sale or a junkyard i can look into please let me know. the color of them do not matter to me.. i have a 2006 spec B Trying to trade suspension im guessing? I intend on rolling and pulling my fenders as well as lowering it quite low EDIT :reread the post nevermind lol Sent from my SM-N900V using Tapatalk Edited May 5, 2014 by monstorr Link to comment Share on other sites More sharing options...
jeffy2.5xt Posted May 5, 2014 Share Posted May 5, 2014 i updated my turbo sale thread with new price 650$tyd and interior pics of the compresor housing. http://legacygt.com/forums/showthread.php/md-forced-performance-hta68-223996.html Link to comment Share on other sites More sharing options...
Brett Posted May 6, 2014 Share Posted May 6, 2014 would anyone be interested in a set of turboxs prototype mufflers? before making an official fs thread, i want to see if there is any initial interest. i only have a few pics of it on the car. $300obo. pm me if interested. i no longer have a legacy, so i don't need these taking up space Link to comment Share on other sites More sharing options...
nikitos05 Posted May 10, 2014 Share Posted May 10, 2014 Anyone got an after market heat shield!? Thanks Link to comment Share on other sites More sharing options...
Heffernan Posted May 15, 2014 Share Posted May 15, 2014 (edited) http://legacygt.com/forums/showthread.php/dmv-2012-felt-chasm-bmx-225343.html?p=4821385#post4821385 Edited May 15, 2014 by Heffernan Link to comment Share on other sites More sharing options...
SBT Posted May 15, 2014 Share Posted May 15, 2014 Please post this in the non-car FS forum and put the link to it in here. Thanks. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Heffernan Posted May 15, 2014 Share Posted May 15, 2014 done. Link to comment Share on other sites More sharing options...
Rester5350 Posted May 15, 2014 Share Posted May 15, 2014 Anyone got an after market heat shield!? Thanks I have a Cobb some where that has a bolt hole cut. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now