derffred Posted February 17, 2007 Share Posted February 17, 2007 this thread needs some serious organization Link to comment Share on other sites More sharing options...
lakepop Posted February 19, 2007 Share Posted February 19, 2007 How about a PN for a JDM rear anti sway bar 20mm ? Link to comment Share on other sites More sharing options...
Opie Posted February 19, 2007 Author Share Posted February 19, 2007 Anyone got the part number for the rear cupholder? Charcoal cupholder: 66150AG01AJC Link to comment Share on other sites More sharing options...
rc0032 Posted February 26, 2007 Share Posted February 26, 2007 windshield washer tank - 86631AG05A (This is the tank for the sedan IIRC the wagon has an extra hole) Link to comment Share on other sites More sharing options...
SubiGT Posted February 26, 2007 Share Posted February 26, 2007 How about the bolts that hold the rear calipers to the slide pins on an 05 LGT wagon? They torque at about 29ft/lbs. In my experience, they also need loctite. I seem to be missing one after I did my pads:( Many Shuvs and Zuuls knew what it was to be roasted in the depths of the Slor that day, I can tell you! Link to comment Share on other sites More sharing options...
CombatCQB Posted March 2, 2007 Share Posted March 2, 2007 Can someone add the JDM Spec B. bumper and grille part #? I've found all other part # except the bumper itself. Link to comment Share on other sites More sharing options...
darb1 Posted March 5, 2007 Share Posted March 5, 2007 ^not sure about the complete part number, japanparts.com has it as 57704you can search their site for 107-024-014-U Link to comment Share on other sites More sharing options...
05LeGacY_GT Posted March 7, 2007 Share Posted March 7, 2007 Whats the part number for the 4 clips that hold the engine cover in place? Link to comment Share on other sites More sharing options...
SubiGT Posted March 8, 2007 Share Posted March 8, 2007 909130051 popits see post 1 Many Shuvs and Zuuls knew what it was to be roasted in the depths of the Slor that day, I can tell you! Link to comment Share on other sites More sharing options...
05LeGacY_GT Posted March 9, 2007 Share Posted March 9, 2007 my bad didn't know the popits were the small clips on the engine cover, thanks...how about the part number for the clam holding the tube to the bov? Link to comment Share on other sites More sharing options...
just_phil Posted March 9, 2007 Share Posted March 9, 2007 13272AA140 Valve cover gasket, legacy/outback, w/turbo, left - 2.5l 2005 - 2006 13293AA051 Valve cover gasket, outback, inner - 3.0l 2005 - 2006 Link to comment Share on other sites More sharing options...
sashi2 Posted March 12, 2007 Share Posted March 12, 2007 Anyone can help me to find part numbers for the following three parts? 1. A clip that holds front bumper cover. The clips are probably all the same, but if they aren't, then the one I need is for driver side close to the wheel well. An arrow points to it on the below picture http://img.photobucket.com/albums/v237/sashi2/bumperclip.jpg  2. A rubber thingy that holds keeps the hood stand attached to the fender. Circled with red on the below picture 3. A metal clip/bracket that holds air filter cover together. Circled in blue on the below picture http://img.photobucket.com/albums/v237/sashi2/AirFilter.jpg I hope I explained everything clear. Thanks, Alex Link to comment Share on other sites More sharing options...
Opie Posted March 15, 2007 Author Share Posted March 15, 2007 Anyone can help me to find part numbers for the following three parts? 1. A clip that holds front bumper cover. The clips are probably all the same, but if they aren't, then the one I need is for driver side close to the wheel well. An arrow points to it on the below picture http://img.photobucket.com/albums/v237/sashi2/bumperclip.jpg  2. A rubber thingy that holds keeps the hood stand attached to the fender. Circled with red on the below picture 3. A metal clip/bracket that holds air filter cover together. Circled in blue on the below picture http://img.photobucket.com/albums/v237/sashi2/AirFilter.jpg I hope I explained everything clear. Thanks, Alex Bumper Clip: 909140007 Hood Prop Rod Grommet: 57253AA010 Air Box Clamps: 46063AG00A Link to comment Share on other sites More sharing options...
05LeGacY_GT Posted March 16, 2007 Share Posted March 16, 2007 Anyone find out the part number for the intercoolor mounting bracket on the driver side, on the bov side and the 3 bolts that hold the intercooler in? Link to comment Share on other sites More sharing options...
Ninjajc7 Posted March 28, 2007 Share Posted March 28, 2007 Is there a part number for the studs that thread into the exhaust housing itself off of the turbine to connect the downpipe? If no do you by happen to know what the thread pitch is on them? Link to comment Share on other sites More sharing options...
rc0032 Posted March 28, 2007 Share Posted March 28, 2007 I believe they are the same as the uppipe studs but Opie can say for sure. 800910340 - Uppipe studs Link to comment Share on other sites More sharing options...
Hops Posted March 29, 2007 Share Posted March 29, 2007 I believe they are the same as the uppipe studs but Opie can say for sure. 800910340 - Uppipe studs  I went to Subaru parts and they gave me an effin' bolt when I asked for the turbo to downpipe stud. The dude said that was the only thing connecting the turbo to the downpipe. I have an awesome exhaust leak the comes right into the cabin. I will head to Subaru tomorrow to check this out. Thanks! Buy my cars! Link to comment Share on other sites More sharing options...
rc0032 Posted March 29, 2007 Share Posted March 29, 2007 You can get then at NAPA for $2 or Subaru for $8. IIRC its m10x1.25 Link to comment Share on other sites More sharing options...
bskey Posted April 6, 2007 Share Posted April 6, 2007 I'm looking for the dimensions (so I can pick one up at Home Depot) or part number for the bolt on the side of the down pipe where it connects to the turbo. Edit: just saw there was a page 2,  <--- dumbass. life in spin cycle..... Link to comment Share on other sites More sharing options...
krompir Posted April 10, 2007 Share Posted April 10, 2007 I'm looking for the part number of the metal shifter surround (the part that needs to be trimmed in a STS install). I have included some pics I found on the forum. Thanks to whoever originally posted them. http://aycu21.webshots.com/image/15140/2006055206152720616_rs.jpg http://aycu08.webshots.com/image/11687/2006016686786345892_rs.jpg Link to comment Share on other sites More sharing options...
Opie Posted April 10, 2007 Author Share Posted April 10, 2007 That plate part number is: 35038AG02A Link to comment Share on other sites More sharing options...
05LeGacY_GT Posted April 11, 2007 Share Posted April 11, 2007 what is the part number for the intercoolor mounting bracket on the driver side/ bov side and the 3 bolts that hold the intercooler in? Link to comment Share on other sites More sharing options...
mystik Posted April 13, 2007 Share Posted April 13, 2007 whats the part number for the control arm rubber bushings (both left and right) as seen in the pic below (JDM 2003 Legacy Wagon SpecB) http://img443.imageshack.us/img443/2051/controlarm1iq3.jpg http://img443.imageshack.us/img443/5682/controlarm3sc2.jpg Link to comment Share on other sites More sharing options...
Opie Posted April 13, 2007 Author Share Posted April 13, 2007 20204ag011 Link to comment Share on other sites More sharing options...
Joon525 Posted April 13, 2007 Share Posted April 13, 2007 What's the part number for the plastic handle that is attached to the sedan's trunk floorboard? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now