retslo Posted May 24, 2009 Share Posted May 24, 2009 Need some verification - dealer found a blown relay for my AC. Part number listed is 82501AG05B - it is weird because all my other relays are gray and this one is blue with different part number listed on it 07003227606. I have 05 Legacy GT Wagon Ltd. Also, that relay is in engine compartment correct? A/C is blowing nothing but hot air ... Link to comment Share on other sites More sharing options...
Marnix Posted May 27, 2009 Share Posted May 27, 2009 For a vehicle with the following VIN (taken from Autotrader) I require the part numbers for the following parts and I would be very grateful for any help: 2005 Legacy 2.5 GT Wagon MT 4S3BP676056352890 Engine ECU Main Bulhead Wiring Loom Main Rear Wiring Loom Main Front Wiring Loom Engine Wiring Loom (under manifold) Intergrated Unit Link to comment Share on other sites More sharing options...
cynet2k Posted June 2, 2009 Share Posted June 2, 2009 For a vehicle with the following VIN (taken from Autotrader) I require the part numbers for the following parts and I would be very grateful for any help: 2005 Legacy 2.5 GT Wagon MT 4S3BP676056352890 Engine ECU Main Bulhead Wiring Loom Main Rear Wiring Loom Main Front Wiring Loom Engine Wiring Loom (under manifold) Intergrated Unit if your ECU is bad you will have to pull it out and get the PT# off the ECU itself because they are very specific. if you dont have one you will have to call a dealer and get them to run your VIN# to pull the correct number the rest is pretty generic. Link to comment Share on other sites More sharing options...
cynet2k Posted June 2, 2009 Share Posted June 2, 2009 Anyone have a part number for this oil line it goes on the top of the passenger side head and connects to to turbo oil line. I cant find it anyway... Its circled in blue... I have a 2007 LGT SpecB... http://inlinethumb27.webshots.com/43226/2323683110085673434S600x600Q85.jpg Any good websites for OEM Part #'s ? Link to comment Share on other sites More sharing options...
MindzEyeWRX02 Posted July 3, 2009 Share Posted July 3, 2009 Does any one know if STi Metal Pedal Pad Set A/T for the 05-06 will fit on an 07 LGT?? I want give it to my wife as a stocking stuffer this xmas. C8110SA010 Metal Pedal Pad Set A/T - STI Link to comment Share on other sites More sharing options...
TNPaparazzi Posted July 3, 2009 Share Posted July 3, 2009 Didn't see this one on there so you can add it Spec B Rear Axle Assembly 2008-2009 6 Speed: 28421AG03B Link to comment Share on other sites More sharing options...
jacksonww1 Posted July 17, 2009 Share Posted July 17, 2009 Anyone know the part # for the memory seat module? Link to comment Share on other sites More sharing options...
sschmelcke Posted August 22, 2009 Share Posted August 22, 2009 ok so i took this piece off because it was hitting my FMIC pipe but now i need it back. for the life of me i can not find where i put it. anyone have any idea of the part number. its the big metal mount that has rubber in it and holds the fuel lines. i wish i could download a parts manual for this car. thanks. Link to comment Share on other sites More sharing options...
derffred Posted August 31, 2009 Share Posted August 31, 2009 Anyone have a part number for the gaskets between the intake manifold and the TGVs? Mine are leaky =\ Link to comment Share on other sites More sharing options...
integroid Posted September 1, 2009 Share Posted September 1, 2009 There really isn't a gasket between the IM and TGV housing. There are 4 rubber o-rings one on each port of the IM. What makes you think it is leaky? I haven't heard one person complain about a leak there. They are re-usable along with the gasket that goes between the block and the TGV. Link to comment Share on other sites More sharing options...
derffred Posted September 1, 2009 Share Posted September 1, 2009 Intermittent misfires on cylinders 2 and 4 at the same time. My friend (subie tech) said he's seen them leak a few times. Same problems I'm having. Link to comment Share on other sites More sharing options...
LGT_King Posted September 1, 2009 Share Posted September 1, 2009 ok so i took this piece off because it was hitting my FMIC pipe but now i need it back. for the life of me i can not find where i put it. anyone have any idea of the part number. its the big metal mount that has rubber in it and holds the fuel lines. i wish i could download a parts manual for this car. thanks. http://opposedforces.com/parts/legacy/us_b13/type_5/intake_and_supply_system_turbocharger/fuel_piping/illustration_1/ Link to comment Share on other sites More sharing options...
NSFW Posted September 2, 2009 Share Posted September 2, 2009 Intermittent misfires on cylinders 2 and 4 at the same time. My friend (subie tech) said he's seen them leak a few times. Same problems I'm having. That's interesting because I have a similar issue. However I just thought it was my fuel injectors. Nothing changed after pulling and replacing my intake manifold and TGVs last weekend, and nothing looked bad about the O-rings or the TGV-block gaskets. Also, I would expect any leakiness there to manifest as a boost leak, and I have no reason to believe that my car has one. Do you? Are you running upgraded injectors or any other mods that have been known to affect idle? I've been thinking about playing with timing to see if that has any effect. Injector latency sure hasn't made any difference. Link to comment Share on other sites More sharing options...
shrike1201 Posted September 12, 2009 Share Posted September 12, 2009 Is there a part number for the OEM turbo shield bracket? The thing that is attached to the downpipe and turbo via two bolts? Link to comment Share on other sites More sharing options...
loak Posted February 23, 2010 Share Posted February 23, 2010 http://www.trademotion.com/schematics/7/7523305.gif Midpipe bolt, spring, nut: 44059AA010 bolt (25) 44044AA010 spring (24) 802008270 nut (21) Anyone know the diameter and thread pitch of the bolt? Link to comment Share on other sites More sharing options...
iliafru Posted May 4, 2010 Share Posted May 4, 2010 I want to cry!!!! I am looking for "Panel-center" for Legacy 2.0 B13 2008 Part Number 66060AG050 (I'm not sure) Link to comment Share on other sites More sharing options...
keepclam Posted May 5, 2010 Share Posted May 5, 2010 I want to cry!!!! I am looking for "Panel-center" for Legacy 2.0 B13 2008 Part Number 66060AG050 (I'm not sure) Perhaps this would be helpful to verify the part number: http://opposedforces.com/parts/legacy/en_b13/type_69/body_equipment_interior/instrument_panel/illustration_6/ This is a European part? I've used Cheam Motors in the UK for online Subaru parts, but their website says they voluntarily closed April 30. Link to comment Share on other sites More sharing options...
blakout Posted May 21, 2010 Share Posted May 21, 2010 Anyone know the part number for the A/C belt tesionner....whoever decided to make these out of plastic deserves to be kicked square in the nuts Link to comment Share on other sites More sharing options...
FredBeans Posted May 21, 2010 Share Posted May 21, 2010 (edited) Are you referring to 73623A? If so, I need your VIN to translate it as there are two part numbers tied to that code for an '05 LGT LTD. http://img338.imageshack.us/img338/3103/accompressor.jpg Edited May 21, 2010 by FredBeans Link to comment Share on other sites More sharing options...
blakout Posted May 23, 2010 Share Posted May 23, 2010 Best way I can explain it is when you are looking at the alternator, its the tensioner on the right. Link to comment Share on other sites More sharing options...
blakout Posted May 23, 2010 Share Posted May 23, 2010 Im going over to where my car is being kept in a couple hours and Ill take a picture so there is more clarification Link to comment Share on other sites More sharing options...
sschmelcke Posted May 23, 2010 Share Posted May 23, 2010 you must be talking about the screw that goes into the plastic piece that breaks if you over tighten it. POS if you ask me Link to comment Share on other sites More sharing options...
omnicron Posted September 22, 2010 Share Posted September 22, 2010 I did not see this anywhere on the site so here they are This was for an 08 Legacy GT. They appear to be the same for other years and even Subaru Models and markets. USDM 28055AA003 Hub Bolt (the stud for the wheel) 28171AG000 Wheel Bolt (OEM lugs nuts) Link to comment Share on other sites More sharing options...
xt2005bonbon Posted November 2, 2010 Share Posted November 2, 2010 note sure if Subaru from Japan made a mistake but I ordered part 84963AG000 which corresponds to the case resistor which plugs into the rear of the OEM LED fog light. I got the part from Germany who got it from Japan. Well, the one I got fit the right side rear LED fog light (i.e. JDM/Aussie/UK and whoever else has right hand drive subies). I have a USDM subie and wanted the case resistor for the left side (or EDM). So I just wanted to note that the part number I used came from this thread and may NOT refer to EDM as it says, but instead to JDM. Though I am not even sure if they do distinguish part numbers for left and right sides. Either that, or Japan made a mistake.. :confused: Link to comment Share on other sites More sharing options...
sl1200 Posted December 20, 2010 Share Posted December 20, 2010 Could someone with easy access give me a list of the pieces I'll need to get to return my air intake (2008 LGT) to its stock configuration (it had an SPT intake on it when we bought it, and I think it's causing intermittent CEL issues). I think this includes a snorkel piece, the airbox (and filter), and the MAF tube, but I'm not 100 percent sure. Thanks in advance! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now