thestratomaster Posted November 9, 2010 Share Posted November 9, 2010 06-07 spec b OEM rims Link to comment Share on other sites More sharing options...
CTATV Posted November 9, 2010 Author Share Posted November 9, 2010 Taking the bumper off really is the easiest way, once you know how it should take less then 5 minutes to remove. I agree with this but if you (guy who asked) want to try just taking off the grille it's two pop-its, two bolts, then four clips across the top. Then you have to push back on the bottom as there are two pieces/clips holding the grille to the bumper... Link to comment Share on other sites More sharing options...
bronconia Posted November 9, 2010 Share Posted November 9, 2010 haha ok I feel pretty noobish right now. I can't believe those are stock! I might have to check into them when I start rim shopping Link to comment Share on other sites More sharing options...
joeblow Posted November 9, 2010 Share Posted November 9, 2010 The only problem is that people charge a lot more for them than a lot of aftermarket sets go for. Typically you see those spec.b wheels going for around $800-1k in good condition, which is more than enough to get some enkei, cheaper OZ, or rotas. Plus they're only 7" wide, and most people go with at least a 7.5" usually 8" or 8.5" It's cool; I'm with the band Link to comment Share on other sites More sharing options...
thestratomaster Posted November 9, 2010 Share Posted November 9, 2010 The only problem is that people charge a lot more for them than a lot of aftermarket sets go for. Typically you see those spec.b wheels going for around $800-1k in good condition, which is more than enough to get some enkei, cheaper OZ, or rotas. Plus they're only 7" wide, and most people go with at least a 7.5" usually 8" or 8.5" i've found some sets for under $500. But unfortunately most people think they have a gold mine with those rims. Similar to the 04 STi wheels Link to comment Share on other sites More sharing options...
bronconia Posted November 9, 2010 Share Posted November 9, 2010 Good to know, thanks for the heads up guys Link to comment Share on other sites More sharing options...
SuperhawkLGT Posted November 10, 2010 Share Posted November 10, 2010 They are also heavy. Link to comment Share on other sites More sharing options...
SBT Posted November 10, 2010 Share Posted November 10, 2010 ^ Really? Weight difference over stock 17"? - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
thestratomaster Posted November 10, 2010 Share Posted November 10, 2010 i don't know an exact weight difference, but they're an inch bigger, so they should be heavier by a bit Link to comment Share on other sites More sharing options...
SuperhawkLGT Posted November 13, 2010 Share Posted November 13, 2010 I am pretty sure they are significantly heavier than a stock set, remember hearing that somewhere, don't ask me where . Link to comment Share on other sites More sharing options...
alexxdj1 Posted November 14, 2010 Share Posted November 14, 2010 Taking the bumper off really is the easiest way, once you know how it should take less then 5 minutes to remove. Where did you get that badge?? Link to comment Share on other sites More sharing options...
GeraldG Posted November 14, 2010 Share Posted November 14, 2010 Where did you get that badge?? diy here -> http://legacygt.com/forums/showthread.php/diy-replica-k2-gear-emblems-128291.html?t=128291 Link to comment Share on other sites More sharing options...
CRogge Posted January 2, 2011 Share Posted January 2, 2011 I just added my iPhone dock install walkthrough to the interior/audio section. http://legacygt.com/forums/showthread.php/iphone-dock-install-walkthrough-152592.html?p=3220736#post3220736 It is only for cars without seat heater switches, but I'm working on a way around that. Link to comment Share on other sites More sharing options...
SBT Posted January 2, 2011 Share Posted January 2, 2011 Very cool and thanks for contributing. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
Drew888 Posted January 8, 2011 Share Posted January 8, 2011 Remove the bumper, it's actually quite easy. We can help when you're ready. Plus, you'll never get the lower grill in there from the front. I just sold my custom lower grill inserts and installed them again for their new owner. Bumper has to come off or you are making the job much more difficult than it has to be. I am trying to do the mesh mod on the bottom of the bumper, but can't figure out how to get the grill off to reach down there... Anyone know how to get the grill off so I don't have to take the bumper off? [URL="http://legacygt.com/forums/vbpicgallery.php?do=view&g=1586"VbGallery/URL] Link to comment Share on other sites More sharing options...
GTurabus Posted January 13, 2011 Share Posted January 13, 2011 This is old info on enabling voice control of the navigation system. Found this on http://www.sb9t.com: http://legacygt.com/forums/showthread.php/oem-navigation-voice-control-video-48659p5.html?highlight=voice+nav Link to comment Share on other sites More sharing options...
ehsnils Posted January 15, 2011 Share Posted January 15, 2011 Adding a power outlet in the trunk on the wagon. Also info on the trailer connector. http://legacygt.com/forums/showthread.php/12v-receptacle-legacy-wagon-install-9097.html?t=9097 Link to comment Share on other sites More sharing options...
underground000 Posted January 17, 2011 Share Posted January 17, 2011 This is old info on enabling voice control of the navigation system. Found this on http://www.sb9t.com: http://legacygt.com/forums/showthread.php/oem-navigation-voice-control-video-48659p5.html?highlight=voice+nav OT does this work the oem navi? I wasnt sure when I read that thread 5eat downshift rev match:) Powder coated wheels: completed:) Link to comment Share on other sites More sharing options...
BigTDogg MA Posted February 24, 2011 Share Posted February 24, 2011 (edited) Adding a power outlet in the trunk on the wagon. Also info on the trailer connector. http://legacygt.com/forums/showthread.php/12v-receptacle-legacy-wagon-install-9097.html?t=9097 Awesome, I figured it was prewired, thanks for confirming! Also did the 20 click seatbelt chime thing yesterday, worked like a charm. I love this forum, thanks guys and gals! Edited March 1, 2011 by BigTDogg (MA) Link to comment Share on other sites More sharing options...
joeblow Posted March 3, 2011 Share Posted March 3, 2011 Footwell Illumination walkthrough. Its tied into the dash illumination, so the footwell isn't lit all the time, only when the headlights are in either the parking or head light position. http://www.legacygt.com/forums/showthread.php/footwell-lighting-walkthrough-156919.html It's cool; I'm with the band Link to comment Share on other sites More sharing options...
SilvrFyre Posted May 6, 2011 Share Posted May 6, 2011 subscribed Link to comment Share on other sites More sharing options...
Ake109 Posted June 22, 2011 Share Posted June 22, 2011 Can someone point me to a thread with a guide on how to remove the clear plastic panel/cover over the factory stereo and a/c controls? (not sure if the USDM has the same cover, I have the McIntosh set for the Asia market. Not JDM) Dust has accumulated on the inside of my cover and its bugging me. Want to wipe it clean. Link to comment Share on other sites More sharing options...
doubleurx Posted March 13, 2012 Share Posted March 13, 2012 Take off the badges.. Link to comment Share on other sites More sharing options...
Spoonwacker Posted March 17, 2012 Share Posted March 17, 2012 I'll just leave this here: http://legacygt.com/forums/showthread.php/so-cut-my-springs-ooooh-181978.html sorry...this forum practically blows goat nuts so im not always on here.Team Pony Express POSTED FROM MY COMPUTER USING A WEB BROWSER Link to comment Share on other sites More sharing options...
TheDon427 Posted March 18, 2012 Share Posted March 18, 2012 Rewelded a hanger and tucked the canisters. Nice and even looking finally! I think I can align the passenger side a bit more to the left a smidgen but I'm happy with it. http://i7.photobucket.com/albums/y273/Nickhead/4f8d3989.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now