eb50 Posted June 7, 2008 Share Posted June 7, 2008 Not true. He said he has a Limited, same HVAC as GT/XT. that is a travesty. go buy a GT Link to comment Share on other sites More sharing options...
cole46_51 Posted June 7, 2008 Share Posted June 7, 2008 that is a travesty. go buy a GT http://i4.photobucket.com/albums/y140/rw650hs/laugh.gif true that, if u have to have such a crappy deck...might as well have some horses to make up the difference:p Link to comment Share on other sites More sharing options...
eb50 Posted June 7, 2008 Share Posted June 7, 2008 i almost bought a forester because of our shitty stereo. instead i dumped 1000$ into a cs, amps, and am still not happy. Link to comment Share on other sites More sharing options...
ean611 Posted June 7, 2008 Share Posted June 7, 2008 (edited) EB50, A) What speakers do you have? That makes ALL the difference in the world. B) Have you done any sound deadening in your front doors? Again, this made huge differences with my install C) have you considdered doing a cubby install? I was playing around with the Alpine PXE-H650, and while many people like it, I wasn't happy, as it didn't have enough adjustments. I ended up putting my old Eclipse 8053 instead of the cubby on the dash. I'm sure a combination of the above can make you very happy with the stereo. (BTW, i haven't put them in the marketplace yet, been too busy, but if you need speakers, I've got a set of Boston Acoustic Z6's that are Legacy ready. They're built into spacer brackets, and tweeter brackets, just bold on. (3-4 longer screws may be requried.) PM me if you're interested, or if you want some advice on how to get your setup sounding better. There's no reason that you can't get a good stereo with some elbow grease as opposed to getting a new car. Edited June 7, 2008 by ean611 punctuation error Link to comment Share on other sites More sharing options...
eb50 Posted June 7, 2008 Share Posted June 7, 2008 EB50, A) What speakers do you have? That makes ALL the difference in the world. CDT Coax fronts and JL VR rears (VR fronts blew) B) Have you done any sound deadening in your front doors? Again, this made huge differences with my install Edead V1.0 on all doors, trunk C) have you considdered doing a cubby install? I was playing around with the Alpine PXE-H650, and while many people like it, I wasn't happy, as it didn't have enough adjustments. I ended up putting my old Eclipse 8053 instead of the cubby on the dash. Yes but i have my nuvi 660 in there I'm sure a combination of the above can make you very happy with the stereo. (BTW, i haven't put them in the marketplace yet, been too busy, but if you need speakers, I've got a set of Boston Acoustic Z6's that are Legacy ready. They're built into spacer brackets, and tweeter brackets, just bold on. (3-4 longer screws may be requried.) PM me if you're interested, or if you want some advice on how to get your setup sounding better. There's no reason that you can't get a good stereo with some elbow grease as opposed to getting a new car. Link to comment Share on other sites More sharing options...
ItalynStylion Posted June 7, 2008 Share Posted June 7, 2008 Ahhhhh, Edred....that stuff sucks. Next time get some damplifier from second skin. That stuff rocks! Edread is like 1/3 as thick and it doesn't stick so well. Link to comment Share on other sites More sharing options...
ean611 Posted June 7, 2008 Share Posted June 7, 2008 EB50, ah, sounds like you've got a good setup in there! The factory head unit is your weak point, and you have a few choices. A) You can get an Alpine PXE-H650, it may help B) You can get a Rockford 3sixty.2, it is like the Alpine unit, only better, as you can set it up yourself. C) Cubby install. Yeah, it takes away space for your nav, but you can then mount your nav in front of where the stock radio is, as you'll never be using that area of your dashboard. Good luck! Link to comment Share on other sites More sharing options...
tmillard Posted June 20, 2008 Share Posted June 20, 2008 So I just stumbled upon this. Am I correct in interpreting TDogg's request for the nav system? Is he looking for a double din bezel to put something like this: http://www.kenwoodusa.com/Car_Entertainment/Mobile_Video_n_Navigation/Navigation/DNX7120 where the stock Nav is? I do not have Nav and I have the little cubby hole and the mpg computer. I want to swap it all out for a double din nav. Where do I get the bezel to do this? Does HCA make these? Link to comment Share on other sites More sharing options...
HighlineCA Posted June 20, 2008 Author Share Posted June 20, 2008 There was at one point a kit. Tdogg already did the research on it. Its unavailable. Either not being imported or discontinued. We can make that bezel to fit that upper location. The difficulty is we do not have a LGT here to build off of. The clearance behind the cubby is extremely limited. As said to Tdogg, it can be built if we plan it all correctly (having a tester here for a few days and being able to make a mold and brackets to mount the radio). Please contact us for further details. To add to your list ean, I would look into the Audiocontrol DQL8 as well. Its features are super extensive and also supports USB tuning. John - $950 is the bezel/hvac mod: Our own mod. The JDM mod will be less (uses JDM controller as a base and modified by us). FYI - Japanparts is not moving on their price. Its $300 regardless. Sorry havent kept up in this thread. Been super busy getting everyones projects home. Thanks, Rich @ HCA Link to comment Share on other sites More sharing options...
ean611 Posted June 20, 2008 Share Posted June 20, 2008 HighlineCA, $300 for parts, then how much would your mod be looking like? It still may be worth it. Link to comment Share on other sites More sharing options...
mrgeoff Posted June 21, 2008 Share Posted June 21, 2008 I agree. This is been a long time in the making, and I'm still looking forward to the whole JDM thing. $1k for the bezel/havac mod is too rich for my blood since you have to start from scratch afterwards. I'm also interested in the ballpark price of the JDM conversion! Link to comment Share on other sites More sharing options...
tdoggydog Posted June 21, 2008 Share Posted June 21, 2008 There was at one point a kit. Tdogg already did the research on it. Its unavailable. Either not being imported or discontinued. We can make that bezel to fit that upper location. The difficulty is we do not have a LGT here to build off of. The clearance behind the cubby is extremely limited. As said to Tdogg, it can be built if we plan it all correctly (having a tester here for a few days and being able to make a mold and brackets to mount the radio). Please contact us for further details. To add to your list ean, I would look into the Audiocontrol DQL8 as well. Its features are super extensive and also supports USB tuning. John - $950 is the bezel/hvac mod: Our own mod. The JDM mod will be less (uses JDM controller as a base and modified by us). FYI - Japanparts is not moving on their price. Its $300 regardless. Sorry havent kept up in this thread. Been super busy getting everyones projects home. Thanks, Rich @ HCA If the price was right, I'd like to have an upgraded nav bezel and eliminate the integrated buttons, therefore allowing use of the new Kenwood system for integrated Bluetooth and iPod. However, if it's too expensive, it may just be worth the route to get a Parrot, drill a hole through the console for wiring and be done. Link to comment Share on other sites More sharing options...
tmillard Posted June 21, 2008 Share Posted June 21, 2008 ^ I can't believe this has not been made for USDM. It seems like a missed opportunity. I would like one too. Link to comment Share on other sites More sharing options...
hubiturcokov Posted June 23, 2008 Share Posted June 23, 2008 any news on the jdm units yet? Link to comment Share on other sites More sharing options...
JohnEylesj Posted June 23, 2008 Share Posted June 23, 2008 (edited) John - $950 is the bezel/hvac mod: Our own mod. The JDM mod will be less (uses JDM controller as a base and modified by us). FYI - Japanparts is not moving on their price. Its $300 regardless. Let me get this clear ... the $950 mod is the one you offer NOW, the "JDM mod" is the one still under development (and intended to be substantially cheaper) ? Edited June 23, 2008 by JohnEylesj Link to comment Share on other sites More sharing options...
JohnEylesj Posted June 23, 2008 Share Posted June 23, 2008 or just get the JazzyMT board or one of the other solutions out there for us and that way you at least get aux in. Perhaps another option (not necessarily cheaper if you buy a new one) would be to get the stereo/HVAC for a newer car (whichever year that aux-in and USB became standard) and drop that into your '05 or '06 ? Assuming it fits and is otherwise compatible ... Link to comment Share on other sites More sharing options...
BlackHole Posted June 23, 2008 Share Posted June 23, 2008 Let me get this clear ... the $950 mod is the one you offer NOW, the "JDM mod" is the one still under development (and intended to be substantially cheaper) ? Yup. Kyle "BlackHole" Link to comment Share on other sites More sharing options...
coxx Posted June 23, 2008 Share Posted June 23, 2008 "Barack Obama, mothaf#%@a! Barack Obama! I'm the president...of hittin' the ass!" -this is not a political view it's merely a quote from a hilarious tv show. Link to comment Share on other sites More sharing options...
mrgeoff Posted June 26, 2008 Share Posted June 26, 2008 Nicely bumping the thread Link to comment Share on other sites More sharing options...
Bonefizz Posted June 27, 2008 Share Posted June 27, 2008 Waiting with Cash in Hand..... Link to comment Share on other sites More sharing options...
eb50 Posted June 27, 2008 Share Posted June 27, 2008 HighlineCA, $300 for parts, then how much would your mod be looking like? It still may be worth it. u havea 2.5i? does that have dual HVAC? Link to comment Share on other sites More sharing options...
Kevin03045 Posted June 27, 2008 Share Posted June 27, 2008 Bump for news? Link to comment Share on other sites More sharing options...
JohnEylesj Posted June 27, 2008 Share Posted June 27, 2008 u havea 2.5i? does that have dual HVAC? I think the "regular" 2.5i has the "manual" controls and thus can use CrotchFeel's (or similar) mounting kit. But the 2.5i Limited has the "automatic/dual" controls and thus awaits Highline's project ! Link to comment Share on other sites More sharing options...
idontknow Posted July 2, 2008 Share Posted July 2, 2008 Again, bump for update. Link to comment Share on other sites More sharing options...
eb50 Posted July 10, 2008 Share Posted July 10, 2008 weekly update bump Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now