BMac1203 Posted June 3, 2007 Share Posted June 3, 2007 Hah...I dunno about that one...depends on the club If its in the US....then yeah...if its in Canada...then just say "eh" and they will rape you for free...honest Tomorrow...tomorrow...I'll love ya tomorrow....it's only a day...a---way... Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
mr_luv Posted June 3, 2007 Share Posted June 3, 2007 :needpics:its tomorrow:munch: Mr.350 Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 3, 2007 Author Share Posted June 3, 2007 just checking in.... We are whore's and need pictures.... hehehe We should make a group called "Light Whore's" OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
lookslikeanevo Posted June 3, 2007 Share Posted June 3, 2007 ^im in Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 3, 2007 Author Share Posted June 3, 2007 Done!!!! OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
Guest Gitster Posted June 3, 2007 Share Posted June 3, 2007 Can someone change the title of this to Write-up ??? It bothers me everytime !! :lol::lol: Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 3, 2007 Author Share Posted June 3, 2007 Engrish is my worste subgict OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 3, 2007 Author Share Posted June 3, 2007 I don't have rights to change it to the WRITE title... lol but I changed the title on my first post... OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
jaymesbry Posted June 3, 2007 Share Posted June 3, 2007 Hey Garrett so where can i find the parts for this? I may have to attempt this sooner or later.. hehe Link to comment Share on other sites More sharing options...
Guest Gitster Posted June 3, 2007 Share Posted June 3, 2007 I don't have rights to change it to the WRITE title... lol but I changed the title on my first post... Cmon I know your white Garrett, you dont say Engrish. I saw the picture of you through the projector ! Hmmm maybe the projector turned your asian eye into a round eye?? Link to comment Share on other sites More sharing options...
lookslikeanevo Posted June 3, 2007 Share Posted June 3, 2007 Hey Garrett so where can i find the parts for this? I may have to attempt this sooner or later.. hehe let me know when you are ready, they are easy to find most of the time... Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
jaymesbry Posted June 3, 2007 Share Posted June 3, 2007 let me know when you are ready, they are easy to find most of the time... cool thanks.. well i want to look for the parts now, where can you usually find them? Link to comment Share on other sites More sharing options...
lookslikeanevo Posted June 3, 2007 Share Posted June 3, 2007 ^hidplanet.com/forums post up a WTB ad... Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 3, 2007 Author Share Posted June 3, 2007 you got me..... Total Kracker here.... OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
CarbonCrew Posted June 4, 2007 Share Posted June 4, 2007 I finally have gathered all of my pieces for my HID retrofit. RX330 Non-AFS projectors, Denso Slim ballasts, and clear Celica lenses. Man I can't wait for my stuff to start showing up. Link to comment Share on other sites More sharing options...
BMac1203 Posted June 4, 2007 Share Posted June 4, 2007 Honestly, this was for you guys tonight. Unfortunately, here in NY, we got rain all day today as well. Unfrotunately, things happened and i broke my phone in half. Expect the pics hopefully tomorrow. Dont give up on me. I dont disappoint (check the CarPC thread). Relax, sorry guys. Keep it together, and wish for a sunny day for me. Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
lookslikeanevo Posted June 4, 2007 Share Posted June 4, 2007 Haha... no worries man, i know how it is Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 4, 2007 Author Share Posted June 4, 2007 We are just giving you a hard time. We all know that sh!T pops up all the time and screw's up the original thought out plan. Thats why they have plan B's etc... Man I gotta wake up at 6:30 for work... I should go to sleep... ok, ok, you talked me into it.. I'm going now... seriously... Night fella's. OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
BMac1203 Posted June 7, 2007 Share Posted June 7, 2007 Alright, alright. So these are the pics that I took the first time that I put these in my car. (I have since needed to take them out again to adjust the # of washers, and am still not happy yet / haven't had the time / it's been raining daily). You see the RX330 AFS bowl mated to the LGT shield, Lens, & Lens holder No bracket needed, you'll see how they're held in the pictures. I had to trim them a bit, as you'll see, and I'm sure that you probably had to on the non-AFS as well. So, either I got you guys confused and this wasn't the epiphany that you were all looking for, or, I just found a simple way of doing this. My favorite part, is that for some reason the bowls/lenses bounce on bumps, and they appear as if they have the leveling system / Flicker of OEM HID's. Ive driven with many different friends that noticed both a flicker, as well as the pure white color of OEM HID's. Love them, just need to get them focused correctly. Onto the pictures.... Youll notice....they're attached via washers on the ends of the screws that go into the lens holders. It doesn't look like much, but youd be VERY surprised at how rigid this setup is. All I had to do was get the placement of the bowl correct against the shield. Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
lookslikeanevo Posted June 7, 2007 Share Posted June 7, 2007 wait...so your not using the whole afs setup? meaning the lenses that came with it aswell? Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
BMac1203 Posted June 7, 2007 Share Posted June 7, 2007 wait...so your not using the whole afs setup? meaning the lenses that came with it aswell? Lol...I knew I was getting your guys' hopes up without meaning to. I couldn't use the AFS lens holders, because they are an enclosed single piece, and upon no modification would ever fit into the Leggy housing. I could easily swap in the AFS lenses, but they are beveled (bumped like a golf ball as miniSTi put it) You guys mentioned not using these lenses in earlier posts, so I didn't use them. Should I be using them? With the LGT lenses, the color is pure white, with a blueish hint at angles and cutoff. Feedback? Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 7, 2007 Author Share Posted June 7, 2007 yes that is correct you don't want to use the AFS lense because its not clear and its bumped (as a golfball I like to describe it as). The older 05 Legacy has a Clear lens that is beveled slightly to give a bit of color at the cutoff if the spacing is correct. The best lens you could use would probably be the S2K lens or for color something like the E30 or 300zx. I'm surprised you got those in there especially with the way you've bolted up everything. Its to bad you couldn't get the enclosed AFS holder to fit. Take some shots of them off a wall showing off the cutoff at say 10ft and 25+ feet if you could. I just might have to fabricate some brackets to make this a swappable thing if the look is correct. OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
BMac1203 Posted June 7, 2007 Share Posted June 7, 2007 Alrighty, will do. When I get my lights apart again, maybe Ill try one more time getting the full AFS to fit, we'll see. Need a CarPC bezel? PM me! Link to comment Share on other sites More sharing options...
MiniStiGuy Posted June 7, 2007 Author Share Posted June 7, 2007 pretty soon you'll catch up to me on how many time's you've had the lights apart.... OEM HID's Rx330 Retro Link to comment Share on other sites More sharing options...
lookslikeanevo Posted June 7, 2007 Share Posted June 7, 2007 Lol...I knew I was getting your guys' hopes up without meaning to. I couldn't use the AFS lens holders, because they are an enclosed single piece, and upon no modification would ever fit into the Leggy housing. I could easily swap in the AFS lenses, but they are beveled (bumped like a golf ball as miniSTi put it) You guys mentioned not using these lenses in earlier posts, so I didn't use them. Should I be using them? With the LGT lenses, the color is pure white, with a blueish hint at angles and cutoff. Feedback? the reasoning to using fully enclosed housings is for better light output and color... Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now